US Barricades Home
Search for:
Welcome Guest
[
Login | Register]
Orders or Information Call
(203)662-0833
Location: /Parking Lot Supplies

Parking Gate 1000

Parking Gate 1000

Product Information

Parking Gate 1000 operates 10’ and 12’ gate arms.
Weatherproof and corrosion-resistant all steel cabinet
1/3 HP instant reversing motor.
Remotely programmable microprocessor controller (via RS-232/485 port)
NoTouch© proximity sensor prevents gate from striking pedestrians and vehicles.
Gate operation counter built into software.
Resettable thermal overload motor protection.
Polished stainless steel mounting base.
Resettable thermal overload motor protection.

Parking Gate 1000 Parking / Access Control  Gate
  • Cabinet:
    14” x 15” x 40” 12 gauge steel with a 13” x 14” x 6.25” polished stainless steel base
  • Door:
    Flush mounted with chrome lock assembly and a single internal gasket
  • Paint:
    Textured powder coat with silicone base. Yellow or white are the standard colors. Additional color options are available.
  • Motor:
    1/3 HP, single phase, instant reversing, 115/220V AC, 50/60 Hz
  • Limit Switch:
    Controls gate travel so no brake device is required
  • Heater:
    500 W thermostat controlled strip device
  • Drive:
    Heavy duty, high cycle speed reducer with 50:1 output to the main shaft raises or lowers gate arm in two seconds.Shear/Spring Pin: Connection from main gate shaft to gate arm bracket shears off to prevent damage to internal mechanism in case of sudden gate stoppage.

CG2100-1  Gate Controller


  • Controller:
    Self-contained universal gate control device. Lane mode selection via RS-232 port on main CPU from laptop or desktop computer. 8 opto-isolated inputs, 4 opto-isolated outputs, 5 – 30V DC range wet or dry. 
  • Environment:
    -15°~149° F (-26°~65° C) with heater
  • Input Power:
    115V AC, 50/60 Hz 220V AC optional feature
  • Output Signal:
    12V DC, 1.5 Amps and 5V DC, 1 Amp
  • Convenience Outlet:
    110V AC, 60 Hz, 15 Amps
  • Service Switches:
    Three position switch to raise gate, lower gate, and normal operation mode, Power On/Off switch, Heater/Fan control switch
  • Microprocessor:
    20 MHz PIC processor
  • Vehicle Detection:
    PC board with one 11 pin amphenol connector for single or dual channel detectors

The CG2100-1 Gate Controller is housed inside the gate cabinet for protection. This controller unit may also be used to replace other manufacturers’ gate controls. Contact US Barricades with questions about this equipment and for information about options and accessories.


Product Code: Security Gate 1000
 
Quantity: Add to Basket

ARRA | About Us | Privacy Policy | Terms & Conditions | Contact Us | Municipality & State D.O.T.'s | Shipping & Handling | Site Map

© Copyright 2010 All Rights Reserved
U.S. Barricade LLC and U.S. Traffic Sign
P.O. Box 2261 Darien, CT 06820

commodo safe Valid XHTML 1.0 Transitional
RSS 1.0 RSS 2.0 ATOM