US Barricades - Traffic Signals, Barricade Lights, Channelizer Drums, Traffic Cone, Delineators, Solar Powered LED Traffic Signs, Plastic Barriers, Pedestrian Safety, Traffic Control, MUTCD Traffic signs

Marine Dayboard

0.00

Marine Dayboard are made with durable rust proof aluminum and High Intensity (HIP) sheeting. US Barricade channel markers exceed all U.S. Coast Guard specifications for marine and Intracoastal Waterway navigation. For more information on channel markers call 203-883-8660, made in the United States.

Specifications:

• Marine Dayboard Sizes - 30"x 30", 36"x 36" and 48"x 48".
• Our aluminum markers are made with thick .080 mil aluminum.
• All markers carry full warranty to last for years.
• Mounting holes centered top and bottom for easy installations.
• Optional aluminum thickness available upon request.
• Made with High Intensity (HIP) sheeting
• All reflective channel markers comply with the latest Coast Guard specifications.
• Made in the United States of America

Marine Dayboard

0.00

Marine Dayboard are made with durable rust proof .080 aluminum and 3M High Intensity sheeting. US Barricade channel markers exceed all U.S. Coast Guard specifications for marine and Intracoastal Waterway navigation. For more information on channel markers call 203-883-8660, made in the United States.

Specifications:

• Marine Dayboard Sizes - 30"x 30", 36"x 36" and 48"x 48".
• Our aluminum markers are made with thick .080 mil aluminum.
• All markers carry full warranty to last for years.
• Mounting holes centered top and bottom for easy installations.
• Optional aluminum thickness available upon request.
• Made with High Intensity (HIP) sheeting
• All reflective channel markers comply with the latest Coast Guard specifications.
• Made in the United States of America

Airport Barricade

95.00

Our Airport Barricade is a cost-effective solution compliant with FAA standards for safety operations at all U.S. airports. The airport safety barricade is blow-molded with UV stabilized high density polyethylene (HDPE) plastic and 3M High Intensity Sheeting (HIP). Each airport safety barricade contains unique features that simplify assembly, installation and teardown. Made in the United States of America.

Product Specifications:
Size: 15" (H) x 96" (L)
Weight Empty: 15 lbs
Weight Full: 106 lbs (sand)

$95.00 Each

School Zone Flashing Beacon System w/Active Speed Radar (AC)

0.00

U.S. Barricades School Zone Flashing Beacon with speed radar is attention-getting system installed at the boundaries of school zones to alert motorists that a reduced speed limit is in effect. The beacons are programmed to activate according to a user-specified calendar. Reducing speeds in school zones is vitally important. Spot Devices is a US manufacturer with industry-leading technology, a full line of pedestrian and school zone safety systems and a reputation for exceptional customer service.

Beacon:

* Aluminum powder coated head
* Lens Size - Two 8" or 12" Beacon Head
* Power - 120v to 220v AC
* Federal yellow, signal green, black, or custom colors
* 2.0” hole top and bottom fits 1.5” NPT fittings
* Terminal block installed
* Stainless steel door roll pins and eye bolt/wing nut assemblies
* Weathertight E.P.D.M. rubber door gasket.

Options:

* Various signal modules - LED, incandescent.
* Signal insert colors - red, yellow, green and arrows.
* Visor - tunnel, cap and full circle.
* Time clock module without dimming relay.
* Two flashing beacons.
* 365 day solid state programmable time clock
* Photocell.

Benefits:

* Increases roadside safety by warning drivers of hidden or approaching hazards.
* Rugged high-quality signal housing.
* Reliable solid-state flasher control.
* Multiple configurations for mounting framework.

Federal Funding and Grants:

Federal grant funding is available for elementary and middle schools through the Safe Routes to School Program (SRTS) for roadway safety measures which include U.S. Barricades traffic calming devices and warning beacon systems. Oue models are eligible for 100% funding as an infrastructure improvement. For information on Federal funding from your State DOT go to http://www.saferoutesinfo.org/contacts/index.cfm.

Other fund raising options include:

* PTA fundraising project
* Donations from local “big box” retailers who want to be good corporate citizens
* Donations from concerned local civic groups
* State transportation grants

School Zone Flashing Beacon System (AC)

0.00

U.S. Barricades School Zone Flashing Beacon System consists of bright, attention-getting beacons installed at the boundaries of school zones to alert motorists that a reduced speed limit is in effect. The beacons are programmed to activate according to a user-specified calendar. Reducing speeds in school zones is vitally important. Spot Devices is a US manufacturer with industry-leading technology, a full line of pedestrian and school zone safety systems and a reputation for exceptional customer service.

Beacon:

* Aluminum powder coated head
* Lens Size - Two 8" or 12" Beacon Head
* Power - 120v to 220v AC
* Federal yellow, signal green, black, or custom colors
* 2.0” hole top and bottom fits 1.5” NPT fittings
* Terminal block installed
* Stainless steel door roll pins and eye bolt/wing nut assemblies
* Weathertight E.P.D.M. rubber door gasket.

Options:

    * Various signal modules - LED, incandescent.
    * Signal insert colors - red, yellow, green and arrows.
    * Visor - tunnel, cap and full circle.
    * Time clock module without dimming relay.
    * Two flashing beacons.
    * 365 day solid state programmable time clock
    * Photocell.

Benefits:

    * Increases roadside safety by warning drivers of hidden or approaching hazards.
    * Rugged high-quality signal housing.
    * Reliable solid-state flasher control.
    * Multiple configurations for mounting framework.

Federal Funding and Grants:

Federal grant funding is available for elementary and middle schools through the Safe Routes to School Program (SRTS) for roadway safety measures which include U.S. Barricades traffic calming devices and warning beacon systems. Oue models are eligible for 100% funding as an infrastructure improvement. For information on Federal funding from your State DOT go to http://www.saferoutesinfo.org/contacts/index.cfm.

Other fund raising options include:

* PTA fundraising project
* Donations from local “big box” retailers who want to be good corporate citizens
* Donations from concerned local civic groups
* State transportation grants

School Zone Flashing Beacon System (AC)

0.00

Airport Warning Light (Solar D-Type)

150.00

Our solar powered Airport D-Light has a revolutionary design that utilizes six special high intensity LED's to project a very bright 360 degree pattern that can be viewed over two miles away. High-performance internal solar modules power the Li-Ion rechargeable batteries housed in a self-contained water tight compartment. Made of high impact UV stabilized LEXAN® Polycarbonate, the Airport D-Light will operate for years under the most demanding condition. Proudly made in the United States, this is the most durable, reliable and brightest D-Light in the industry.

To operate simply switch ‘ON’ and the unit is ready for immediate operation, settings can be set to either steady-on or flashing operation. Once installed, the Airport Solar D-Light requires no operator intervention and will last for years under the most demanding conditions.

The internal solar module charges the battery during daylight hours, and at dusk the light will automatically begin operation once the ambient light threshold drops sufficiently. Flat discharge curve of battery coupled with advanced circuit design enables the light to run at constant brightness each night of operation.

Features:

* The only D-light in the industry that utilizes six special high intensity LED's .
* LED bulbs rated for over 100,000 hours life span
* Change from steady burn or flashing mode with the 3 way switch
* Output of 3 to 5 Candela in steady burn mode at center and 3 to 7 Candela in flashing mode.
* Photocell controlled circuit is manually turned on/off by switch on the base of the dome
* Meets and exceeds F.A.A and I.T.E. specifications for Type D light
* Lens and housing made with Hi-Impact UV stabilized LEXAN® Polycarbonate
* Li-Ion rechargeable batteries will last for years before requiring replacement.
* Made in the United States of America

$150.00 Each

Oklahoma State Road

0.00

Oklahoma state route marker signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved. All traffic signs made at U.S. Barricades are made with American made aluminum and High Intensity HIP sheeting with Diamond Grade sheeting available at request. State Road Markers are sold only to Municipalities and State DOT's.

• State Route Marker sizes 24"x 24", 30"x 24" or 30"x 30"
• Signs are made from .080gu American made aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, Connecticut, USA

24 x 24" One or Two Digits $50.00
30 x 24" Three Digits $60.00
30 x 30" $75.00

Ohio State Road

0.00

Ohio state route marker signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved. All traffic signs made at U.S. Barricades are made with American made aluminum and High Intensity HIP sheeting with Diamond Grade sheeting available at request. State Road Markers are sold only to Municipalities and State DOT's, made in Stamford, CT.

• State Route Marker sizes 24"x 24", 30"x 24" or 30"x 30"
• Signs are made from .080gu American made aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

24 x 24" One or Two Digits $50.00
30 x 24" Three Digits $60.00
30 x 30" $75.00

North Dakota State Road

0.00

North Dakota state route marker signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved. All traffic signs made at U.S. Barricades are made with American made aluminum and High Intensity HIP sheeting with Diamond Grade sheeting available at request. State Road Markers are sold only to Municipalities and State DOT's, made in Stamford, CT.

• State Route Marker sizes 24"x 24", 30"x 24" or 30"x 30"
• Signs are made from .080gu American made aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

24 x 24" One or Two Digits $50.00
30 x 24" Three Digits $60.00
30 x 30" $75.00

North Carolina State Road

0.00

North Carolina state route marker signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved. All traffic signs made at U.S. Barricades are made with American made aluminum and High Intensity HIP sheeting with Diamond Grade sheeting available at request. State Road Markers are sold only to Municipalities and State DOT's, made in Stamford, CT.

• State Route Marker sizes 24"x 24", 30"x 24" or 30"x 30"
• Signs are made from .080gu American made aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

24 x 24" One or Two Digits $50.00
30 x 24" Three Digits $60.00
30 x 30" $75.00

New York State Road

0.00

New York state route marker signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved. All traffic signs made at U.S. Barricades are made with American made aluminum and High Intensity HIP sheeting with Diamond Grade sheeting available at request. State Road Markers are sold only to Municipalities and State DOT's, made in Stamford, CT.

• State Route Marker sizes 24"x 24", 30"x 24" or 30"x 30"
• Signs are made from .080gu American made aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

24 x 24" One or Two Digits $50.00
30 x 24" Three Digits $60.00
30 x 30" $75.00

New Mexico State Road

0.00

New Mexico state route marker signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved. All traffic signs made at U.S. Barricades are made with American made aluminum and High Intensity HIP sheeting with Diamond Grade sheeting available at request. State Road Markers are sold only to Municipalities and State DOT's, made in Stamford, CT.

• State Route Marker sizes 24"x 24", 30"x 24" or 30"x 30"
• Signs are made from .080gu American made aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

24 x 24" One or Two Digits $50.00
30 x 24" Three Digits $60.00
30 x 30" $75.00

New Jersey State Road

0.00

New Jersey state route marker signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved. All traffic signs made at U.S. Barricades are made with American made aluminum and High Intensity HIP sheeting with Diamond Grade sheeting available at request. State Road Markers are sold only to Municipalities and State DOT's, made in Stamford, CT.

• State Route Marker sizes 24"x 24", 30"x 24" or 30"x 30"
• Signs are made from .080gu American made aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

24 x 24" One or Two Digits $50.00
30 x 24" Three Digits $60.00
30 x 30" $75.00

New Hampshire State Road

0.00

New Hampshire state route marker signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved. All traffic signs made at U.S. Barricades are made with American made aluminum and High Intensity HIP sheeting with Diamond Grade sheeting available at request. State Road Markers are sold only to Municipalities and State DOT's, made in Stamford, CT.

• State Route Marker sizes 24"x 24", 30"x 24" or 30"x 30"
• Signs are made from .080gu American made aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

24 x 24" One or Two Digits $50.00
30 x 24" Three Digits $60.00
30 x 30" $75.00

Nevada State Road

0.00

Nevada state route marker signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved. All traffic signs made at U.S. Barricades are made with American made aluminum and High Intensity HIP sheeting with Diamond Grade sheeting available at request. State Road Markers are sold only to Municipalities and State DOT's, made in Stamford, CT.

• State Route Marker sizes 24"x 24", 30"x 24" or 30"x 30"
• Signs are made from .080gu American made aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

24 x 24" One or Two Digits $50.00
30 x 24" Three Digits $60.00
30 x 30" $75.00

Nebraska State Road

0.00

Nebraska state route marker signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved. All traffic signs made at U.S. Barricades are made with American made aluminum and High Intensity HIP sheeting with Diamond Grade sheeting available at request. State Road Markers are sold only to Municipalities and State DOT's, made in Stamford, CT.

• State Route Marker sizes 24"x 24", 30"x 24" or 30"x 30"
• Signs are made from .080gu American made aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

24 x 24" One or Two Digits $50.00
30 x 24" Three Digits $60.00
30 x 30" $75.00

Montana State Road

0.00

Montana state route marker signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved. All traffic signs made at U.S. Barricades are made with American made aluminum and High Intensity HIP sheeting with Diamond Grade sheeting available at request. State Road Markers are sold only to Municipalities and State DOT's, made in Stamford, CT.

• State Route Marker sizes 24"x 24", 30"x 24" or 30"x 30"
• Signs are made from .080gu American made aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

24 x 24" One or Two Digits $50.00
30 x 24" Three Digits $60.00
30 x 30" $75.00

Missouri State Road

0.00

Missouri state route signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved. All traffic signs made at U.S. Barricades are made with American made aluminum and High Intensity HIP sheeting with Diamond Grade sheeting available at request. State Road Markers are sold only to Municipalities and State DOT's, made in Stamford, CT.

• State Route Marker sizes 24"x 24", 30"x 24" or 30"x 30"
• Signs are made from .080gu American made aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

24 x 24" One or Two Digits $50.00
30 x 24" Three Digits $60.00
30 x 30" $75.00

Mississippi State Road

0.00

Mississippi state route signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved. All traffic signs made at U.S. Barricades are made with American made aluminum and High Intensity HIP sheeting with Diamond Grade sheeting available at request. State Road Markers are sold only to Municipalities and State DOT's, made in Stamford, CT.

• State Route Marker sizes 24"x 24", 30"x 24" or 30"x 30"
• Signs are made from .080gu American made aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

24 x 24" One or Two Digits $50.00
30 x 24" Three Digits $60.00
30 x 30" $75.00

Minnesota State Road Marker

0.00

Minnesota state route signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved. All traffic signs made at U.S. Barricades are made with American made aluminum and High Intensity HIP sheeting with Diamond Grade sheeting available at request. State Road Markers are sold only to Municipalities and State DOT's, made in Stamford, CT.

• State Route Marker sizes 24"x 24", 30"x 24" or 30"x 30"
• Signs are made from .080gu American made aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

24 x 24" One or Two Digits $50.00
30 x 24" Three Digits $60.00
30 x 30" $75.00

Michigan State Road

0.00

Michigan state route signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved.

• State Route Marker sizes 24"x 24" or 30"x 30"
• Signs are made from thick .080 mil U.S. Aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

Massachusetts State Road

0.00

Massachusetts state route signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved.

• State Route Marker sizes 24"x 24" or 30"x 30"
• Signs are made from thick .080 mil U.S. Aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

Maryland State Road

0.00

Maryland state route signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved.

• State Route Marker sizes 24"x 24" or 30"x 30"
• Signs are made from thick .080 mil U.S. Aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

Maine State Road

0.00

Maine state route signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved.

• State Route Marker sizes 18"x 24" or 24"x 30"
• Signs are made from thick .080 mil U.S. Aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

Louisiana

0.00

Louisiana state route signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved.

• State Route Marker sizes 24"x 24" or 30"x 30"
• Signs are made from thick .080 mil U.S. Aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

Kentucky State Road

0.00

Kentucky state route signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved.

• State Route Marker sizes 24"x 24" or 30"x 30"
• Signs are made from thick .080 mil U.S. Aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

Kansas State Road

0.00

Kansas state route signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved.

• State Route Marker sizes 24"x 24" or 30"x 30"
• Signs are made from thick .080 mil U.S. Aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

Iowa State Road

0.00

Iowa state route signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved.

• State Route Marker sizes 24"x 24" or 30"x 30"
• Signs are made from thick .080 mil U.S. Aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

Indiana State Road

0.00

Indiana state route signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved.

• State Route Marker sizes 24"x 24" or 30"x 30"
• Signs are made from thick .080 mil U.S. Aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

Illinois State Road

0.00

Illinois state route signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved.

• State Route Marker sizes 24"x 24" or 30"x 30"
• Signs are made from thick .080 mil U.S. Aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

Idaho State Road

0.00

Idaho state route signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved.

• State Route Markers sizes 24"x 24" or 30"x 30"
• Signs are made from thick .080 mil U.S. Aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

Hawaii State Road

0.00

Hawaii state route signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved.

• State Route Markers sizes 24"x 24" or 30"x 30"
• Signs are made from thick .080 mil U.S. Aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

Georgia State Road

0.00

Georgia state route signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved.

• State Route Markers sizes 24"x 24" or 30"x 30"
• Signs are made from thick .080 mil U.S. Aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

Florida State Road

0.00

Florida state route signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved.

• State Route Markers sizes 24"x 24" or 30"x 30"
• Signs are made from thick .080 mil U.S. Aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

District of Columbia Route Sign

0.00

District of Columbia route signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved.

• State Route Markers sizes 18"x 24" or 24"x 30"
• Signs are made from thick .080 mil U.S. Aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

Delaware State Road

0.00

Delaware state route signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved.

• State Route Markers sizes 24"x 24" or 30"x 30"
• Signs are made from thick .080 mil U.S. Aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

Connecticut State Road

0.00

Connecticut state route signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved.

• State Route Markers sizes 24"x 24" or 30"x 30"
• Signs are made from thick .080 mil U.S. Aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

Colorado State Road

0.00

Colorado state route signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved.

• State Route Markers sizes 24"x 24" or 30"x 30"
• Signs are made from thick .080 mil U.S. Aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

California State Road

0.00

California state route signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved.

• State Route Markers sizes 24"x 24" or 30"x 30"
• Signs are made from thick .080 mil U.S. Aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

Arkansas State Road

0.00

Arkansas state road signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved.

• State Route Markers sizes 24"x 24" or 30"x 30"
• Signs are made from thick .080 mil U.S. Aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

Arizona State Road

0.00

Arizona state road signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved.

• State Route Markers sizes 24"x 24" or 30"x 30"
• Signs are made from thick .080 mil U.S. Aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

Alaska State Road Marker

0.00

Alaska state road signs can be made with any state route number in one, two or three digit configuration and are MUTCD and State DOT approved.

• State Route Markers sizes 24"x 24" or 30"x 30"
• Signs are made from thick .080 mil U.S. Aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

Alabama State Road

0.00

Alabama state road signs can be made with any state route number in 2-digit or 3-digit configuration and are MUTCD and State DOT approved.

• State Route Markers sizes 24"x 24" or 30"x 30"
• Signs are made from thick .080 mil U.S. Aluminum
• Made with High Intensity HIP Sheeting, Diamond Grade available
• Mounting holes centered top and bottom for easy installations
• All signs comply with MUTCD and State DOT specifications
• Made in Stamford, CT. USA

Steel Barrier 8ft

0.00

It’s been America’s most popular crowd management safety device for over 30 years. U.S. Barricades interlocking steel barriers have provided security at every major sporting event, parade and rock concert in the world. With American made craftsmanship our galvanized barriers will last for years under the most demanding conditions.

Specifications:

* 43 inches high
* Weight (with bases): approximately 55 pounds
* 18 uprights
* Barriers made of thick 16-gauge tubing
* Hooks ensure a positive interlocking of barrier
* Hooks and uprights inserted into frame prior to welding
* Hot dip galvanization to prevent corrosion
* Made in the United States of America

Steel Barrier 6ft

0.00

It’s been America’s most popular crowd management safety device for over 30 years. U.S. Barricades interlocking steel barriers have provided security at every major sporting event, parade and rock concert in the world. With American made craftsmanship our galvanized barriers will last for years under the most demanding conditions.

Specifications:

* 43 inches high
* Weight (with bases): approximately 44 pounds
* 14 uprights
* Barriers made of thick 16-gauge tubing
* Hooks ensure a positive interlocking of barrier
* Hooks and uprights inserted into frame prior to welding
* Hot dip galvanization to prevent corrosion
* Made in the United States of America

Solar SCHOOL SPEED LIMIT XX (S5-1) Diamond Grade DG3

0.00

Solar powered SCHOOL SPEED LIMIT traffic sign (S5-1) made with 3M Diamond Grade FYG for top part and DG3 Sheeting for the bottom part of sign..

Solar SCHOOL SPEED LIMIT XX (S5-1) High Intensity HIP

0.00

Solar powered SCHOOL SPEED LIMIT traffic sign (S5-1) made with 3M High Intensity HIP.

Solar RED LIGHT PHOTO ENFORCED (R10-19) 30x30 Diamond Grade DG3

0.00

Solar powered RED LIGHT PHOTO ENFORCED (R10-19) 30x30 traffic sign, made with 3M Diamond Grade DG3 Sheeting.

Solar RED LIGHT PHOTO ENFORCED (R10-19) 30x30 High Intensity HIP

0.00

Solar powered RED LIGHT PHOTO ENFORCED (R10-19) 30x30, made with 3M High Intensity HIP reflective sheeting.

Solar DO NOT STOP ON TRACKS (R8-8) 24x30 Diamond Grade DG3

0.00

Solar powered DO NOT STOP ON TRACKS sign (R8-8) 24x30, made with 3M Diamond Grade sheeting.

Solar DO NOT STOP ON TRACKS (R8-8) 24x30 High Intensity HIP

0.00

Solar powered DO NOT STOP ON TRACKS sign (R8-8) 24x30, made with 3M High Intensity HIP sheeting.

Solar Powered PEDESTRIAN CROSSING SYMBOL (W11-2) 36x36 Diamond Grade FYG

0.00

Our solar powered traffic signs feature an array of incredibly bright LED's that flash in unison, MUTCD standard once per second, commanding the attention of drivers in any weather conditions day or night. We offer the brightest solar powered LED traffic sign in the industry at the lowest price in the United States! U.S. Barricades brilliant innovation of enhancing traffic signs with LED's (Light-Emitting Diodes) makes intersections safer, reduces accidents and saves lives! Any MUTCD sign can be transformed into a solar powered traffic sign that meets all specifications for U.S. roads and highways.

Features:

• Solar powered traffic signs can be made in 30x30", 36x36" and 48x48"
• Reflective sheeting is made by 3M Diamond Grade FYG.

• Battery power, Nickel Metal Hydride (NiHM)- 14,000mAh, lifespan over 5 years with

24/7 operation.

• LED Life expectancy over 200,000 hours

• Installs onto any new or existing sign post or light pole for easy installation.

• High intensity LED's command attention day and night, can be seen for over two miles.

• Can be programmed to operate continuously (24/7) or on solar time clocks.

• Automatically adjusts light output for maximum visibility and battery efficiency.

• Heighten driver awareness, increased visibility at high incident intersections, keeping

drivers and pedestrians safe.

• 53% Reduction of intersection blow-through, keeping drivers alert.

• Multiple signs can be synchronized.

• All solar powered signs are MUTCD and state DOT compliant.

• All signs, parts and hardware are made in the United States.

• One full year warranty on all material and hardware.

Smart Activation Options:
24/7 continuous

Push-buttons and/or motion (vehicle) detectors.

Time clock activation (Windows based software programmable)

Can be integrated into an ITS (Intelligent Transportation System)

Wireless control activation.
Vehicle detection activation.

Solar Powered PEDESTRIAN CROSSING SYMBOL (W11-2) 36x36 Diamond Grade DG3

0.00

• Solar powered traffic signs can be made in 30x30", 36x36" and 48x48"
• Reflective sheeting is made by 3M Diamond Grade DG3.

• Battery power, Nickel Metal Hydride (NiHM)- 14,000mAh, lifespan over 5 years with

24/7 operation.

• LED Life expectancy over 200,000 hours

• Installs onto any new or existing sign post or light pole for easy installation.

• High intensity LED's command attention day and night, can be seen for over two miles.

• Can be programmed to operate continuously (24/7) or on solar time clocks.

• Automatically adjusts light output for maximum visibility and battery efficiency.

• Heighten driver awareness, increased visibility at high incident intersections, keeping

drivers and pedestrians safe.

• 53% Reduction of intersection blow-through, keeping drivers alert.

• Multiple signs can be synchronized.

• All solar powered signs are MUTCD and state DOT compliant.

• All signs, parts and hardware are made in the United States.

• One full year warranty on all material and hardware.

Smart Activation Options:
24/7 continuous

Push-buttons and/or motion (vehicle) detectors.

Time clock activation (Windows based software programmable)

Can be integrated into an ITS (Intelligent Transportation System)

Wireless control activation.
Vehicle detection activation.

Solar Powered PEDESTRIAN CROSSING SYMBOL (W11-2) 36x36 High Intensity HIP

0.00

• Solar powered traffic signs can be made in 30x30", 36x36" and 48x48"
• Reflective sheeting is made by 3M High Intensity HIP.

• Battery power, Nickel Metal Hydride (NiHM)- 14,000mAh, lifespan over 5 years with

24/7 operation.

• LED Life expectancy over 200,000 hours

• Installs onto any new or existing sign post or light pole for easy installation.

• High intensity LED's command attention day and night, can be seen for over two miles.

• Can be programmed to operate continuously (24/7) or on solar time clocks.

• Automatically adjusts light output for maximum visibility and battery efficiency.

• Heighten driver awareness, increased visibility at high incident intersections, keeping

drivers and pedestrians safe.

• 53% Reduction of intersection blow-through, keeping drivers alert.

• Multiple signs can be synchronized.

• All solar powered signs are MUTCD and state DOT compliant.

• All signs, parts and hardware are made in the United States.

• One full year warranty on all material and hardware.

Smart Activation Options:
24/7 continuous

Push-buttons and/or motion (vehicle) detectors.

Time clock activation (Windows based software programmable)

Can be integrated into an ITS (Intelligent Transportation System)

Wireless control activation.
Vehicle detection activation.

Smart Activation Options:
24/7 continuous

Push-buttons and/or motion (vehicle) detectors.

Time clock activation (Windows based software programmable)

Can be integrated into an ITS (Intelligent Transportation System)

Wireless control activation.
Vehicle detection activation.

Solar Powered PEDESTRIAN CROSSING SYMBOL (W11-2) 30x30 Diamond Grade FYG

0.00

• Solar powered traffic signs can be made in 30x30", 36x36" and 48x48"
• Reflective sheeting is made by 3M Diamond Grade FYG.

• Battery power, Nickel Metal Hydride (NiHM)- 14,000mAh, lifespan over 5 years with

24/7 operation.

• LED Life expectancy over 200,000 hours

• Installs onto any new or existing sign post or light pole for easy installation.

• High intensity LED's command attention day and night, can be seen for over two miles.

• Can be programmed to operate continuously (24/7) or on solar time clocks.

• Automatically adjusts light output for maximum visibility and battery efficiency.

• Heighten driver awareness, increased visibility at high incident intersections, keeping

drivers and pedestrians safe.

• 53% Reduction of intersection blow-through, keeping drivers alert.

• Multiple signs can be synchronized.

• All solar powered signs are MUTCD and state DOT compliant.

• All signs, parts and hardware are made in the United States.

• One full year warranty on all material and hardware.

Smart Activation Options:
24/7 continuous

Push-buttons and/or motion (vehicle) detectors.

Time clock activation (Windows based software programmable)

Can be integrated into an ITS (Intelligent Transportation System)

Wireless control activation.
Vehicle detection activation.

Solar Powered PEDESTRIAN CROSSING SYMBOL (W11-2) 30x30 Diamond Grade DG3

0.00

• Solar powered traffic signs can be made in 30x30", 36x36" and 48x48"
• Reflective sheeting is made by 3M Diamond Grade DG3.

• Battery power, Nickel Metal Hydride (NiHM)- 14,000mAh, lifespan over 5 years with

24/7 operation.

• LED Life expectancy over 200,000 hours

• Installs onto any new or existing sign post or light pole for easy installation.

• High intensity LED's command attention day and night, can be seen for over two miles.

• Can be programmed to operate continuously (24/7) or on solar time clocks.

• Automatically adjusts light output for maximum visibility and battery efficiency.

• Heighten driver awareness, increased visibility at high incident intersections, keeping

drivers and pedestrians safe.

• 53% Reduction of intersection blow-through, keeping drivers alert.

• Multiple signs can be synchronized.

• All solar powered signs are MUTCD and state DOT compliant.

• All signs, parts and hardware are made in the United States.

• One full year warranty on all material and hardware.

Smart Activation Options:
24/7 continuous

Push-buttons and/or motion (vehicle) detectors.

Time clock activation (Windows based software programmable)

Can be integrated into an ITS (Intelligent Transportation System)

Wireless control activation.
Vehicle detection activation.

Solar DO NOT STOP ON TRACKS (R8-8) 18x24 Diamond Grade DG3

0.00

Solar powered DO NOT STOP ON TRACKS sign (R8-8) 18x24, made with 3M Diamond Grade sheeting.

Solar DO NOT STOP ON TRACKS (R8-8) 18x24 High Intensity HIP

0.00

Solar powered DO NOT STOP ON TRACKS sign (R8-8) 18x24, made with 3M High Intensity HIP sheeting.

Solar Powered RAILROAD CROSSING (W10-1) 30x30 Diamond Grade DG3

0.00

Solar Powered RAILROAD CROSSING Sign (W10-1) 30x30, made with 3M Diamond Grade DG3 sheeting.

Solar Powered RAILROAD CROSSING (W10-1) 30x30 High Intensity HIP

0.00

Solar Powered RAILROAD CROSSING (W10-1) 30x30 made with 3M High Intensity HIP Sheeting.

Solar STATE LAW YIELD FOR PEDESTRIAN (R1-6) Diamond Grade FYG

0.00

Solar powered STATE LAW YIELD FOR PEDESTRIAN (R1-6) made with 3M Diamond Grade FYG.

Solar STATE LAW STOP FOR PEDESTRIAN (R1-6a) High Intensity HIP

0.00

Solar STATE LAW STOP FOR PEDESTRIAN made with 3M High Intensity HIP sheeting.

Solar powered SPEED LIMIT Sign (R2-1) 36x48 Diamond Grade DG3

0.00

• Solar Powered SPEED LIMIT Sign -18"x 24", 24"x 30", 36"x 48" and 48"x 60".
• Speed limit sign can be made with any speed m.p.h.
• Solar is the inexpensive alternative to the permanent AC powered applications.
• Utilizing a unique package that combines solar panels, flashing electronics, and batteries.
• Made with 3M High Intensity (HIP) sheeting, Diamond Grade Cubed or Diamond Grade VIP.
• All parts and hardware are made in the United States.

Solar powered SPEED LIMIT Sign (R2-1) 36x48 High Intensity HIP

0.00

Solar powered SPEED LIMIT Sign (R2-1) 24x30 Diamond Grade DG3

0.00

• Solar Powered LED SPEED LIMIT Sign -18"x 24", 24"x 30", 36"x 48" and 48"x 60".
• Speed limit sign can be made with any speed m.p.h.
• Solar is the inexpensive alternative to the permanent AC powered applications.
• Utilizing a unique package that combines solar panels, flashing electronics, and batteries.
• Made with 3M High Intensity (HIP) sheeting, Diamond Grade Cubed or Diamond Grade VIP.
• All parts and hardware are made in the United States.

Solar powered SPEED LIMIT Sign (R2-1) 24x30 High Intensity HIP

0.00

Solar powered SPEED LIMIT Sign (R2-1) 18x24 Diamond Grade DG3

0.00

• Solar Powered LED SPEED LIMIT Sign -18"x24", 24"x 30", 36"x 48" and 48"x 60".
• Speed limit sign can be made with any speed m.p.h.
• Solar is the inexpensive alternative to the permanent AC powered applications.
• Utilizing a unique package that combines solar panels, flashing electronics, and batteries.
• Made with 3M High Intensity (HIP) sheeting, Diamond Grade Cubed or Diamond Grade VIP.
• All parts and hardware are made in the United States.

Solar powered WRONG WAY Sign (R5-1a) 24x36 Diamond Grade DG3

0.00

U.S. Barricades brilliant innovation of enhancing traffic signs with LED's (Light-Emitting Diodes) makes intersections safer, reduces accidents and saves lives! Our solar powered traffic signs feature an array of incredibly bright LED's that flash in unison, once per second, commanding the attention of drivers in any weather conditions day or night. We offer the brightest solar powered LED traffic sign in the industry at the lowest price in the United States! Any MUTCD sign can be transformed into a solar powered traffic sign that meet all specifications.

Features

• Solar powered traffic signs can be made in 18"x30", 24"x36" and 30"x42".
• Reflective sheeting is made by 3M Diamond Grade DG3.

• Battery power, Nickel Metal Hydride (NiHM)- 14,000mAh, lifespan over 5 years with

24/7 operation.

• LED Life expectancy over 200,000 hours

• Installs onto any new or existing sign post or light pole for easy installation.

• High intensity LED's command attention day and night, can be seen for over two miles.

• Can be programmed to operate continuously (24/7) or on solar time clocks.

• Automatically adjusts light output for maximum visibility and battery efficiency.

• Heighten driver awareness, increased visibility at high incident intersections, keeping

drivers and pedestrians safe.

• 53% Reduction of intersection blow-through, keeping drivers alert.

• Multiple signs can be synchronized.

• All solar powered signs are MUTCD and state DOT compliant.

• All signs, parts and hardware are made in the United States.

• One full year warranty on all material and hardware.

Smart Activation Options
24/7 continuous

Push-buttons and/or motion (vehicle) detectors.

Time clock activation (Windows based software programmable)

Can be integrated into an ITS (Intelligent Transportation System)

Wireless control activation.
Vehicle detection activation

Solar powered STOP Sign (R1-1) 36x36 Diamond Grade DG3

0.00

• Solar powered traffic signs can be made in 24x24", 30x30", 36x36" and 48x48"
• Reflective sheeting is made by 3M Diamond Grade DG3.

• Battery power, Nickel Metal Hydride (NiHM)- 14,000mAh, lifespan over 5 years with

24/7 operation.

• LED Life expectancy over 200,000 hours

• Installs onto any new or existing sign post or light pole for easy installation.

• High intensity LED's command attention day and night, can be seen for over two miles.

• Can be programmed to operate continuously (24/7) or on solar time clocks.

• Automatically adjusts light output for maximum visibility and battery efficiency.

• Heighten driver awareness, increased visibility at high incident intersections, keeping

drivers and pedestrians safe.

• 53% Reduction of intersection blow-through, keeping drivers alert.

• Multiple signs can be synchronized.

• All solar powered signs are MUTCD and state DOT compliant.

• All signs, parts and hardware are made in the United States.

• One full year warranty on all material and hardware.

Smart Activation Options
24/7 continuous

Push-buttons and/or motion (vehicle) detectors.

Time clock activation (Windows based software programmable)

Can be integrated into an ITS (Intelligent Transportation System)

Wireless control activation.
Vehicle detection activation

Solar powered STOP Sign (R1-1) 36x36 High Intensity HIP

0.00

• Solar powered traffic signs can be made in 24x24", 30x30", 36x36" and 48x48"
• Reflective sheeting is made by 3M High Intensity HIP

• Battery power, Nickel Metal Hydride (NiHM)- 14,000mAh, lifespan over 5 years with

24/7 operation.

• LED Life expectancy over 200,000 hours

• Installs onto any new or existing sign post or light pole for easy installation.

• High intensity LED's command attention day and night, can be seen for over two miles.

• Can be programmed to operate continuously (24/7) or on solar time clocks.

• Automatically adjusts light output for maximum visibility and battery efficiency.

• Heighten driver awareness, increased visibility at high incident intersections, keeping

drivers and pedestrians safe.

• 53% Reduction of intersection blow-through, keeping drivers alert.

• Multiple signs can be synchronized.

• All solar powered signs are MUTCD and state DOT compliant.

• All signs, parts and hardware are made in the United States.

• One full year warranty on all material and hardware.

Smart Activation Options
24/7 continuous

Push-buttons and/or motion (vehicle) detectors.

Time clock activation (Windows based software programmable)

Can be integrated into an ITS (Intelligent Transportation System)

Wireless control activation.
Vehicle detection activation

Solar powered STOP Sign (R1-1) 30x30 Diamond Grade DG3

0.00

• Solar powered traffic signs can be made in 24x24", 30x30", 36x36" and 48x48"
• Reflective sheeting is made by 3M Diamond Grade DG3.

• Battery power, Nickel Metal Hydride (NiHM)- 14,000mAh, lifespan over 5 years with

24/7 operation.

• LED Life expectancy over 200,000 hours

• Installs onto any new or existing sign post or light pole for easy installation.

• High intensity LED's command attention day and night, can be seen for over two miles.

• Can be programmed to operate continuously (24/7) or on solar time clocks.

• Automatically adjusts light output for maximum visibility and battery efficiency.

• Heighten driver awareness, increased visibility at high incident intersections, keeping

drivers and pedestrians safe.

• 53% Reduction of intersection blow-through, keeping drivers alert.

• Multiple signs can be synchronized.

• All solar powered signs are MUTCD and state DOT compliant.

• All signs, parts and hardware are made in the United States.

• One full year warranty on all material and hardware.

Smart Activation Options
24/7 continuous

Push-buttons and/or motion (vehicle) detectors.

Time clock activation (Windows based software programmable)

Can be integrated into an ITS (Intelligent Transportation System)

Wireless control activation.
Vehicle detection activation

Solar powered STOP Sign (R1-1) 30x30 High Intensity HIP

1500.00

• Solar powered traffic signs can be made in 24x24", 30x30", 36x36" and 48x48"
• Reflective sheeting is made by 3M High Intensity HIP.

• Battery power, Nickel Metal Hydride (NiHM)- 14,000mAh, lifespan over 5 years with

24/7 operation.

• LED Life expectancy over 200,000 hours

• Installs onto any new or existing sign post or light pole for easy installation.

• High intensity LED's command attention day and night, can be seen for over two miles.

• Can be programmed to operate continuously (24/7) or on solar time clocks.

• Automatically adjusts light output for maximum visibility and battery efficiency.

• Heighten driver awareness, increased visibility at high incident intersections, keeping

drivers and pedestrians safe.

• 53% Reduction of intersection blow-through, keeping drivers alert.

• Multiple signs can be synchronized.

• All solar powered signs are MUTCD and state DOT compliant.

• All signs, parts and hardware are made in the United States.

• One full year warranty on all material and hardware.

Smart Activation Options
24/7 continuous

Push-buttons and/or motion (vehicle) detectors.

Time clock activation (Windows based software programmable)

Can be integrated into an ITS (Intelligent Transportation System)

Wireless control activation.
Vehicle detection activation

$1500.00 Each

Solar powered STOP Sign (R1-1) 24x24 Diamond Grade

1450.00

• Solar powered traffic signs can be made in 24x24", 30x30", 36x36" and 48x48"
• Reflective sheeting is made by 3M Diamond Grade DG3.

• Battery power, Nickel Metal Hydride (NiHM)- 14,000mAh, lifespan over 5 years with

24/7 operation.

• LED Life expectancy over 200,000 hours

• Installs onto any new or existing sign post or light pole for easy installation.

• High intensity LED's command attention day and night, can be seen for over two miles.

• Can be programmed to operate continuously (24/7) or on solar time clocks.

• Automatically adjusts light output for maximum visibility and battery efficiency.

• Heighten driver awareness, increased visibility at high incident intersections, keeping

drivers and pedestrians safe.

• 53% Reduction of intersection blow-through, keeping drivers alert.

• Multiple signs can be synchronized.

• All solar powered signs are MUTCD and state DOT compliant.

• All signs, parts and hardware are made in the United States.

• One full year warranty on all material and hardware.

Smart Activation Options
24/7 continuous

Push-buttons and/or motion (vehicle) detectors.

Time clock activation (Windows based software programmable)

Can be integrated into an ITS (Intelligent Transportation System)

Wireless control activation.
Vehicle detection activation

$1450.00 Each

Safety Traffic Barrier 70 (water or sand)

0.00

US Barricade plastic safety traffic barrier 70 or water sand barrier is a specialty barrier that is superior in strength and quality to the competition. Our barriers are designed and built in several different sizes and can be used in a variety of traffic control and security applications.

All of our plastic traffic barriers are made by a rotational molding process by which a one-piece, seamless advanced plastic product is manufactured, this will give you the strongest most reliable portable traffic safety barrier in the United States. While filled with either ballast the US Barricade barrier will not bulge or distort like other portable barricades and will last for years. Made in the United States of America.

Plastic Safety Traffic Barrier 70

Standard Colors: Safety Orange, White, Yellow, Blue, Olive Drab and Military Tan.
Composition: UV-Resistant Polyethylene
Size: Height: 32" / 813 mm
Length: 72" / 1829 mm
Width: 18" / 457 mm
Mass: 70 lb. (empty)

Features:

* Recyclable material
* Lightweight
* Durable
* Drain plugs
* Structurally sound
* Variety of colors
* Pre-molded attachment area for flashing lights.

Applications Include:

    * force protection
    * crowd control barriers
    * anti-terrorism
    * gate approaches
    * border patrol
    * guard units
    * construction zones
    * airport construction
    * troop protection
    * air shows
    * traffic control
    * flight line
    * race tracks

25 or less $ 275.00 each, over 25 barriers $ 260.00 each.

Safety Traffic Barrier 50 (water or sand)

0.00

US Barricade plastic safety traffic barrier 50 or water sand barrier is a specialty barrier that is superior in strength and quality to the competition. Our barriers are designed and built in several different sizes and can be used in a variety of traffic control and security applications.

All of our plastic traffic barriers are made by a rotational molding process by which a one-piece, seamless advanced plastic product is manufactured, this will give you the strongest most reliable portable traffic safety barrier in the United States. While filled with either ballast the US Barricade barrier will not bulge or distort like other portable barricades and will last for years. Made in the United States of America.

Plastic Safety Traffic Barrier 50

Standard Colors: Safety Orange, White, Yellow, Blue, Olive Drab and Military Tan.
Composition: UV-Resistant Polyethylene
Size: Height: 24" / 610 mm
Length: 96" / 2438 mm
Width: 16" / 407 mm
Wall: . 1/2”
Mass: 50 lb. (empty) / 725 lbs. (filled with 90 gal. water) (1000 lbs. filled with sand)

Features:

* Recyclable material
* Lightweight
* Durable
* Drain plugs
* Structurally sound
* Variety of colors
* Pre-molded attachment area for flashing lights.

$210.00 Each

Blue Railroad Light (Solar)

129.00

U.S. Barricades solar blue railroad light uses four LED lights to project a powerful 360° beam that can be seen for over two miles. Tough and reliable, our lights are made with UV stabilized, Hi-Impact polypropylene for long life in the harshest environment. The upper case design eliminates the need for a rubber neck ring, this design will keep water and dust out and guarantee to work under any weather conditions. This light is proudly made in the United States of America.

Solid State Circuitry:

Moisture proof circuit using the latest state of the art electronic components reverse polarity protected available in flashing or steady burn, with or without photo electric switch Standard flash rate in 65+/- 10 FPM and on time is a minimum of 10% of the flash cycle Special purpose circuits with various flash rates and on times are available upon request.

Warranty:

The electronic circuit is guaranteed for one year from the date of purchase against defects in material and workmanship. U.S. Barricades, at its option, will repair or replace defective product returned freight prepaid within the warranty period.

• Utilizes 4 LEDs and Large 5" diameter dome lens to project a bright 360° beam.
• Lasts 2 to 3 days without charging, once it is fully charged in Flashing mode
• External water resistant push button switch
• 2.5-7 candela in flashing mode
• Environmentally friendly NiMH batteries
• Rechargeable battery pack, containing 4 rechargeable batteries, is easily replaced after a number of years

$129.00 Each

Water Sand Traffic Barrier 31x120

0.00

US Barricade Sand Water Barrier is a specialty barrier that is superior in strength and quality to the competition. Our barriers are designed and built in several different sizes and can be used in a variety of traffic control and security applications.

All of our plastic traffic barriers are made by a rotational molding process by which a one-piece, seamless advanced plastic product is manufactured, this will give you the strongest most reliable portable traffic safety barrier made in the United States. While filled with either ballast the US Barricade barrier will not bulge or distort like other portable barricades and will last for years. Proudly made in the United States of America.

Water Sand Traffic Barrier

Standard Colors: Safety Orange, White, Yellow, Blue, Olive Drab and Military Tan.
Composition: UV-Resistant Polyethylene
Size: Height: 31"
Length: 120"
Width: 24"

$465.00 per unit

Color Availability

Blue Flag Railroad Light (Solar)

337.50

U.S. Barricades solar blue railroad light is the is the most durable light in the industry because we build the solar panel inside the lens cover. Tough and reliable, our lights are made with UV stabilized, Hi-Impact polypropylene for long life in the harshest environment. The upper case design eliminates the need for a rubber neck ring, this design will keep water and dust out and guarantee to work under any weather conditions. This light is proudly made in the United States of America.

Solid State Circuitry:

Lenses:

7" Polycarbonate Fresnel design with 5/8"Reflector ring

Housing:

Custom molded case identification and /or hot stamp imprinting available upon request.

Packaging:

Lights are packaged ten per carton. In addition, each carton contains one switch pin, ten bolts and one wrench. The weight per carton is 24 pounds.

Hardware:

The standard tamper proof mounting bolt is 1/2"x3-3-/4" with a pyramid shaped head. Half moon and 5 sided button hex head bolts in various lengths and bolt protectors are available upon request.

D-Cell Power:

All-new solar assist 3-way, 3 volt high efficiency LED lights. The solar assist light has internal solar panels to trickle charge "D" cell alkaline batteries to give a superior long lasting more reliable power source.

Warranty:

Toll Plaza Lane Control Sign

0.00

Toll Plaza Lane Control Sign (CASH LANE). Call U.S. Barricades for more information about this product.

Toll Plaza Advance Lane Control Sign

0.00

Toll Plaza Advance Lane Control Sign can be made in any size with payment logos, call U.S. Barricades for more information about this product.

Toll Plaza Advance Sign

0.00

Advance Toll Plaza signs can be made in any size with payment logos and custom text. Call U.S. Barricades for more information on this product.

ADA Audible Pedestrian Signal

0.00

Audible Pedestrian Signal units provide improved crosswalk safety for visually impaired pedestrians. With digital reliability, U.S. Traffic Signal is the most advanced APS device available in the United States.

Features:

* Loud, clear signal
* Low power consumption
* 3 colors to choose from
* Meets or exceeds all ADA requirements
* Government funding available
* Extremely reliable
* Meets State of California requirements
* Uses popular birdcalls for North/South and East/West Directions. 4 Walk, 4 Don’t Walk "Cuckoo" & "Peep" sounds approved by United States and Canada transportation authorities.

Specifications:

Size:
5" tall x 3.75" wide x 5" deep
Weight:
3 lbs.
Power:
115 ± 22% volts 3 watts
Temperature:
-34°F to +167°F
Output:
90 DB at 1 meter
Colors:
Traffic Green, Federal Yellow; Anodized Aluminum
Sound:
Cuckoo (North / South)
Peep-Peep (East / West)

Scoop Tunnel Visor (12-inch Aluminum)

0.00

The Scoop Visor is designed to resist snow build-up on signal lenses in colder climates. A louvered vent on top and an open bottom contribute to the increased vertical movement of air across the face of the signal lens thereby increasing resistance to the deposit of snow.

Signal Visors increase signal visibility in sunlight while still allowing an unobstructed view for multiple lanes of approaching drivers and pedestrians. U.S. Barricades has a range of standard and angled visors including tunnel, full circle, and cap, that offer a variety of signal viewing angles. Whether you are looking for aluminum or polycarbonate, Federal yellow, signal green, black, or custom colors, U.S. Barricades has the visors to meet your needs. All visors are made in the United States of America.

Benefits:

• Increases signal visibility in sunlight
• Twist-on tabs facilitate ease of installation
• Available in a variety of materials, sizes, styles, and
angles to meet your specific requirements

Standard Features:

• One-piece construction (except Scoop)
• Twist-on mounting tabs
• 3° downward tilt

Specifications:

Dimensions:
12-inch Diameter, 12-inch Depth
Degree of Tilt:
3° (down)
Material:
Aluminum Type 3003, very good corrosion resistance, 0.050” thick
Finish:
Powder coated
Colors-Exterior:
Federal yellow, signal green, black, or custom
Colors-Interior
Flat Black
Mounting:
Twist-on tabs

Full Circle Visor (12-inch Polycarbonate)

0.00

Full Circle Signal Visors come in molded polycarbonate 12-inch signal configuration. Integrally formed, twist-on mounting tabs make installation and maintenance a snap, and a standard three degree downward tilt facilitates signal visibility.

Signal Visors increase signal visibility in sunlight while still allowing an unobstructed view for multiple lanes of approaching drivers and pedestrians. U.S. Barricades has a range of standard and angled visors including tunnel, full circle, and cap, that offer a variety of signal viewing angles. Whether you are looking for aluminum or polycarbonate, Federal yellow, signal green, black, or custom colors, U.S. Barricades has the visors to meet your needs. All visors are made in the United States of America.

Benefits:

• Increases signal visibility in sunlight
• Twist-on tabs facilitate ease of installation
• One-piece construction (except Scoop Visor)
• Available in a variety of materials, sizes, styles, and
angles to meet your specific requirements

Standard Features:

• One-piece construction (except Scoop)
• Twist-on mounting tabs
• 3° downward tilt

Specifications:

Dimensions:
12-inch Diameter, 12-inch Depth
Degree of Tilt:
3° (down)
Material:
Polycarbonate, Ultraviolet and heat stabilized, flame retardant, permanently colored
Finish:
Colored resins integral to visor
Colors-Exterior:
Federal yellow, signal green, black, or custom
Colors-Interior
Flat Black
Mounting:
Twist-on tabs

Full Circle Visor (12-inch Aluminum)

0.00

Full Circle Signal Visors come in stamped or formed aluminum 12-inch signal configuration. Integrally formed, twist-on mounting tabs make installation and maintenance a snap, and a standard three degree downward tilt facilitates signal visibility.

Signal Visors increase signal visibility in sunlight while still allowing an unobstructed view for multiple lanes of approaching drivers and pedestrians. U.S. Barricades has a range of standard and angled visors including tunnel, full circle, and cap, that offer a variety of signal viewing angles. Whether you are looking for aluminum or polycarbonate, Federal yellow, signal green, black, or custom colors, U.S. Barricades has the visors to meet your needs. All visors are made in the United States of America.

Benefits:

• Increases signal visibility in sunlight
• Twist-on tabs facilitate ease of installation
• One-piece construction (except Scoop Visor)
• Available in a variety of materials, sizes, styles, and
angles to meet your specific requirements

Standard Features:

• One-piece construction (except Scoop)
• Twist-on mounting tabs
• 3° downward tilt

Specifications:

Dimensions:
12-inch Diameter, 12-inch Depth
Degree of Tilt:
3° (down)
Material:
Aluminum Type 3003, very good corrosion resistance, 0.050” thick
Finish:
Powder coated
Colors-Exterior:
Federal yellow, signal green, black, or custom
Colors-Interior
Flat Black
Mounting:
Twist-on tabs

Full Circle Visor (8-inch Polycarbonate)

0.00

Full Circle Signal Visors come in molded polycarbonate 8-inch signal configuration. Integrally formed, twist-on mounting tabs make installation and maintenance a snap, and a standard three degree downward tilt facilitates signal visibility.

Signal Visors increase signal visibility in sunlight while still allowing an unobstructed view for multiple lanes of approaching drivers and pedestrians. U.S. Barricades has a range of standard and angled visors including tunnel, full circle, and cap, that offer a variety of signal viewing angles. Whether you are looking for aluminum or polycarbonate, Federal yellow, signal green, black, or custom colors, U.S. Barricades has the visors to meet your needs. All visors are made in the United States of America.

Benefits:

• Increases signal visibility in sunlight
• Twist-on tabs facilitate ease of installation
• One-piece construction (except Scoop Visor)
• Available in a variety of materials, sizes, styles, and
angles to meet your specific requirements

Standard Features:

• One-piece construction (except Scoop)
• Twist-on mounting tabs
• 3° downward tilt

Specifications:

Dimensions:
8-inch Diameter, 8-inch Depth
Degree of Tilt:
3° (down)
Material:
Polycarbonate, Ultraviolet and heat stabilized, flame retardant, permanently colored
Finish:
Colored resins integral to visor
Colors-Exterior:
Federal yellow, signal green, black, or custom
Colors-Interior
Flat Black
Mounting:
Twist-on tabs

Full Circle Visor (8-inch Aluminum)

0.00

Full Circle Signal Visors come in stamped or formed aluminum 8 inch signal configurations. Integrally formed, twist-on mounting tabs make installation and maintenance a snap, and a standard three degree downward tilt facilitates signal visibility.

Signal Visors increase signal visibility in sunlight while still allowing an unobstructed view for multiple lanes of approaching drivers and pedestrians. U.S. Barricades has a range of standard and angled visors including tunnel, full circle, and cap, that offer a variety of signal viewing angles. Whether you are looking for aluminum or polycarbonate, Federal yellow, signal green, black, or custom colors, U.S. Barricades has the visors to meet your needs. All visors are made in the United States of America.

Benefits:

• Increases signal visibility in sunlight
• Twist-on tabs facilitate ease of installation
• One-piece construction (except Scoop Visor)
• Available in a variety of materials, sizes, styles, and
angles to meet your specific requirements

Standard Features:

• One-piece construction (except Scoop)
• Twist-on mounting tabs
• 3° downward tilt

Specifications:

Dimensions:
8-inch Diameter, 8-inch Depth
Degree of Tilt:
3° (down)
Material:
Aluminum Type 3003, very good corrosion resistance, 0.050” thick
Finish:
Powder coated
Colors-Exterior:
Federal yellow, signal green, black, or custom
Colors-Interior
Flat Black
Mounting:
Twist-on tabs

Tunnel Visor (12-inch Polycarbonate)

0.00

Traffic Signal Tunnel Visors come in molded polycarbonate 12-inch signal configuration. Integrally formed, twist-on mounting tabs make installation and maintenance a snap, and a standard three degree downward tilt facilitates signal visibility.

Signal Visors increase signal visibility in sunlight while still allowing an unobstructed view for multiple lanes of approaching drivers and pedestrians. U.S. Barricades has a range of standard and angled visors including tunnel, full circle, and cap, that offer a variety of signal viewing angles. Whether you are looking for aluminum or polycarbonate, Federal yellow, signal green, black, or custom colors, U.S. Barricades has the visors to meet your needs. All visors are made in the United States of America.

Benefits:

• Increases signal visibility in sunlight
• Twist-on tabs facilitate ease of installation
• One-piece construction (except Scoop Visor)
• Available in a variety of materials, sizes, styles, and
angles to meet your specific requirements

Standard Features:

• One-piece construction (except Scoop)
• Twist-on mounting tabs
• 3° downward tilt

Specifications:

Dimensions:
12-inch Diameter, 12-inch Depth
Degree of Tilt:
3° (down)
Material:
Polycarbonate, Ultraviolet and heat stabilized, flame retardant, permanently colored
Finish:
Colored resins integral to visor
Colors-Exterior:
Federal yellow, signal green, black, or custom
Colors-Interior
Flat Black
Mounting:
Twist-on tabs

Tunnel Visor (12-inch Aluminum)

0.00

Tunnel Visors come in stamped or formed aluminum for 12-inch traffic signal configurations. Integrally formed, twist-on mounting tabs make installation and maintenance a snap, and a standard three degree downward tilt facilitates signal visibility.

Signal Visors increase signal visibility in sunlight while still allowing an unobstructed view for multiple lanes of approaching drivers and pedestrians. U.S. Barricades has a range of standard and angled visors including tunnel, full circle, and cap, that offer a variety of signal viewing angles. Whether you are looking for aluminum or polycarbonate, Federal yellow, signal green, black, or custom colors, U.S. Barricades has the visors to meet your needs. All visors are made in the United States of America.

Benefits:

• Increases signal visibility in sunlight
• Twist-on tabs facilitate ease of installation
• One-piece construction (except Scoop Visor)
• Available in a variety of materials, sizes, styles, and
angles to meet your specific requirements

Standard Features:

• One-piece construction (except Scoop)
• Twist-on mounting tabs
• 3° downward tilt

Specifications:

Dimensions:
12-inch Diameter, 12-inch Depth
Degree of Tilt:
3° (down)
Material:
Aluminum Type 3003, very good corrosion resistance, 0.050” thick
Finish:
Powder coated
Colors-Exterior:
Federal yellow, signal green, black, or custom
Colors-Interior
Flat Black
Mounting:
Twist-on tabs

Tunnel Visor (8-inch Polycarbonate)

0.00

Tunnel Visors come in molded polycarbonate for 8-inch traffic signal configurations. Integrally formed, twist-on mounting tabs make installation and maintenance a snap, and a standard three degree downward tilt facilitates signal visibility.

Signal Visors increase signal visibility in sunlight while still allowing an unobstructed view for multiple lanes of approaching drivers and pedestrians. U.S. Barricades has a range of standard and angled visors including tunnel, full circle, and cap, that offer a variety of signal viewing angles. Whether you are looking for aluminum or polycarbonate, Federal yellow, signal green, black, or custom colors, U.S. Barricades has the visors to meet your needs. All visors are made in the United States of America.

Benefits:

• Increases signal visibility in sunlight
• Twist-on tabs facilitate ease of installation
• One-piece construction (except Scoop Visor)
• Available in a variety of materials, sizes, styles, and
angles to meet your specific requirements

Standard Features:

• One-piece construction (except Scoop)
• Twist-on mounting tabs
• 3° downward tilt

Specifications:

Dimensions:
8-inch Diameter, 8-inch Depth
Degree of Tilt:
3° (down)
Material:
Polycarbonate, Ultraviolet and heat stabilized, flame retardant, permanently colored
Finish:
Colored resins integral to visor
Colors-Exterior:
Federal yellow, signal green, black, or custom
Colors-Interior
Flat Black
Mounting:
Twist-on tabs

Tunnel Visor (8-inch Aluminum)

0.00

Tunnel Signal Visors come in stamped or formed aluminum for 8-inch traffic signal configurations. Integrally formed, twist-on mounting tabs make installation and maintenance a snap, and a standard three degree downward tilt facilitates signal visibility.

Signal Visors increase signal visibility in sunlight while still allowing an unobstructed view for multiple lanes of approaching drivers and pedestrians. U.S. Barricades has a range of standard and angled visors including tunnel, full circle, and cap, that offer a variety of signal viewing angles. Whether you are looking for aluminum or polycarbonate, Federal yellow, signal green, black, or custom colors, U.S. Barricades has the visors to meet your needs. All visors are made in the United States of America.

Benefits:

• Increases signal visibility in sunlight
• Twist-on tabs facilitate ease of installation
• One-piece construction (except Scoop Visor)
• Available in a variety of materials, sizes, styles, and
angles to meet your specific requirements

Standard Features:

• One-piece construction (except Scoop)
• Twist-on mounting tabs
• 3° downward tilt

Specifications:

Dimensions:
8-inch Diameter, 8-inch Depth
Degree of Tilt:
3° (down)
Material:
Aluminum Type 3003, very good corrosion resistance, 0.050” thick
Finish:
Powder coated
Colors-Exterior:
Federal yellow, signal green, black, or custom
Colors-Interior
Flat Black
Mounting:
Twist-on tabs

Cap Visor (12-inch Polycarbonate)

0.00

Traffic Signal Cap Visors come in molded polycarbonate for 12-inch traffic signal configurations. Integrally formed, twist-on mounting tabs make installation and maintenance a snap, and a standard three degree downward tilt facilitates signal visibility.

Signal Visors increase signal visibility in sunlight while still allowing an unobstructed view for multiple lanes of approaching drivers and pedestrians. U.S. Barricades has a range of standard and angled visors including tunnel, full circle, and cap, that offer a variety of signal viewing angles. Whether you are looking for aluminum or polycarbonate, Federal yellow, signal green, black, or custom colors, U.S. Barricades has the visors to meet your needs. All visors are made in the United States of America.

Benefits:

• Increases signal visibility in sunlight
• Twist-on tabs facilitate ease of installation
• One-piece construction (except Scoop Visor)
• Available in a variety of materials, sizes, styles, and
angles to meet your specific requirements

Standard Features:

• One-piece construction (except Scoop)
• Twist-on mounting tabs
• 3° downward tilt

Specifications:

Dimensions:
12-inch Diameter, 12-inch Depth
Degree of Tilt:
3° (down)
Material:
Polycarbonate, Ultraviolet and heat stabilized, flame retardant, permanently colored
Finish:
Colored resins integral to visor
Colors-Exterior:
Federal yellow, signal green, black, or custom
Colors-Interior
Flat Black
Mounting:
Twist-on tabs

Cap Visor (8-inch Polycarbonate)

0.00

Cap Visors come in molded polycarbonate for 8-inch traffic signal configurations. Integrally formed, twist-on mounting tabs make installation and maintenance a snap, and a standard three degree downward tilt facilitates signal visibility.

Signal Visors increase signal visibility in sunlight while still allowing an unobstructed view for multiple lanes of approaching drivers and pedestrians. U.S. Barricades has a range of standard and angled visors including tunnel, full circle, and cap, that offer a variety of signal viewing angles. Whether you are looking for aluminum or polycarbonate, Federal yellow, signal green, black, or custom colors, U.S. Barricades has the visors to meet your needs. All visors are made in the United States of America.

Benefits:

• Increases signal visibility in sunlight
• Twist-on tabs facilitate ease of installation
• One-piece construction (except Scoop Visor)
• Available in a variety of materials, sizes, styles, and
angles to meet your specific requirements

Standard Features:

• One-piece construction (except Scoop)
• Twist-on mounting tabs
• 3° downward tilt

Specifications:

Dimensions:
8-inch Diameter, 8-inch Depth
Degree of Tilt:
3° (down)
Material:
Polycarbonate, Ultraviolet and heat stabilized, flame retardant, permanently colored
Finish:
Colored resins integral to visor
Colors-Exterior:
Federal yellow, signal green, black, or custom
Colors-Interior
Flat Black
Mounting:
Twist-on tabs

Cap Visor (12-inch Aluminum)

0.00

Cap Signal Visors come in stamped or formed aluminum for 12-inch traffic signal configurations. Integrally formed, twist-on mounting tabs make installation and maintenance a snap, and a standard three degree downward tilt facilitates signal visibility.

Signal Visors increase signal visibility in sunlight while still allowing an unobstructed view for multiple lanes of approaching drivers and pedestrians. U.S. Barricades has a range of standard and angled visors including tunnel, full circle, and cap, that offer a variety of signal viewing angles. Whether you are looking for aluminum or polycarbonate, Federal yellow, signal green, black, or custom colors, U.S. Barricades has the visors to meet your needs. All visors are made in the United States of America.

Benefits:

• Increases signal visibility in sunlight
• Twist-on tabs facilitate ease of installation
• One-piece construction (except Scoop Visor)
• Available in a variety of materials, sizes, styles, and
angles to meet your specific requirements

Standard Features:

• One-piece construction (except Scoop)
• Twist-on mounting tabs
• 3° downward tilt

Specifications:

Dimensions:
12-inch Diameter, 12-inch Depth
Degree of Tilt:
3° (down)
Material:
Aluminum Type 3003, very good corrosion resistance, 0.050” thick
Finish:
Powder coated
Colors-Exterior:
Federal yellow, signal green, black, or custom
Colors-Interior
Flat Black
Mounting:
Twist-on tabs

Cap Visor (8-inch Aluminum)

0.00

Signal Visors come in stamped or formed aluminum 8 inch signal configuration. Integrally formed, twist-on mounting tabs make installation and maintenance a snap, and a standard three degree downward tilt facilitates signal visibility.

Signal Visors increase signal visibility in sunlight while still allowing an unobstructed view for multiple lanes of approaching drivers and pedestrians. U.S. Barricades has a range of standard and angled visors including tunnel, full circle, and cap, that offer a variety of signal viewing angles. Whether you are looking for aluminum or polycarbonate, Federal yellow, signal green, black, or custom colors, U.S. Barricades has the visors to meet your needs. All visors are made in the United States of America.

Benefits:

• Increases signal visibility in sunlight
• Twist-on tabs facilitate ease of installation
• One-piece construction (except Scoop Visor)
• Available in a variety of materials, sizes, styles, and
angles to meet your specific requirements

Standard Features:

• One-piece construction (except Scoop)
• Twist-on mounting tabs
• 3° downward tilt

Specifications:

Dimensions:
8-inch Diameter, 8-inch Depth
Degree of Tilt:
3° (down)
Material:
Aluminum Type 3003, very good corrosion resistance, 0.050” thick
Finish:
Powder coated
Colors-Exterior:
Federal yellow, signal green, black, or custom
Colors-Interior
Flat Black
Mounting:
Twist-on tabs

ADA Pedestrian Pushbutton (9x12)

0.00

McCain’s Pedestrian Pushbuttons are designed for use in conjunction with pedestrian signals to promote the experience and safety of people at intersections. Promoting freedom of mobility, our two-inch pushbuttons can be operated with minimal force, in compliance with the Americans with Disabilities Act (ADA) guidelines. Pushbuttons all feature a tamper-resistant, stainless steel design and come in traffic yellow, signal green and black. Made in the United States of America.

Benefits:

* Two-inch activator button meets or exceeds ADA guidelines
* Adjustable mounting rails accommodate a range of post sizes
* Tamper-resistant design
* Dust-proof, water-resistant switch tested to 10 million cycles

Standard Features:

* Meets or exceeds ADA guidelines
* Activating force of less than 3.5 lbs
* Dustproof, water-resistant switch
* Adjustable pole mounting brackets

General Specifications:

Housing Dimensions:
9.0” W x 16.8 H x 2.7” D
Plate Mounting Hole Spacing:
7.25” W x 10.25” H
Button Diameter:
2"
Housing Material:
Cast aluminum
Button Material:
Stainless steel
Finish(es):
Powder coat
Color(s):
Federal yellow, signal green, black, or custom color
Switch Activating Force:
3.5 lbs (15.6 N)
Mounting:
Standard signal hardware
Shipping Weight:
8.3 lbs

Options:

* Wide variety of cover plates (i.e., with pedestrian instructions)
* 2” ADA pushbutton available separately to retrofit existing standard, non-ADA pushbuttons

ADA Pedestrian Pushbutton (5x7)

0.00

McCain’s Pedestrian Pushbuttons are designed for use in conjunction with pedestrian signals to promote the experience and safety of people at intersections. Promoting freedom of mobility, McCain two-inch pushbuttons can be operated with minimal force, in compliance with the Americans with Disabilities Act (ADA) guidelines. Pushbuttons all feature a tamper-resistant, stainless steel design.

Benefits:

* Two-inch activator button meets or exceeds ADA guidelines
* Adjustable mounting rails accommodate a range of post sizes
* Tamper-resistant design
* Dust-proof, water-resistant switch tested to 10 million cycles

Standard Features:

* Meets or exceeds ADA guidelines
* Activating force of less than 3.5 lbs
* Dustproof, water-resistant switch
* Adjustable pole mounting brackets

Specifications:

Size:
5.1” W x 11.0” H x 2.7” D
Plate Mounting Hole Spacing:
4.0” W x 6.75” H
Button Diameter:
2"
Housing Material:
Cast aluminum
Button Material:
Stainless steel
Finish(es):
Powder coat
Color(s):
Federal yellow, signal green, black, or custom color
Switch Activating Force:
3.5 lbs (15.6 N)
Mounting:
Standard signal hardware
Shipping Weight:
2.7 lbs

Options:

* Wide variety of cover plates (i.e., with pedestrian instructions)
* 2” ADA pushbutton available separately to retrofit existing standard, non-ADA pushbuttons

Pedestrian Housing Clamshell Mount

0.00

Light pole Clamshell Mount is a quick and convenient way to mount a 16-inch pedestrian housing. Installed half on the pole and half on the housing, the dual-mount pieces easily slide together creating a singular, secure mount. When the pedestrian housing requires maintenance or needs to be replaced, the mount easily separates, allowing the housing to be quickly taken down and remounted in the field.

Benefits:

* Multiple mounting options to accommodate your specific requirements
* Quick and easy to install
* Can be left or right mounted or easily converted one to the other
* Vandal-resistant
* Available in multiple colors

Standard Features:

* 2-part mounting assembly
* Symmetrical mounting holes allow for left or right mount
* Neoprene gasket provides a weathertight seal
* 28” wire leads (3) provided to wire clamshell terminal block to pedestrian signal terminal block
* Field wiring is terminated on clamshell terminal block
* Flathead 3/16” hex socket closure bolt
* 3-position, 2-row terminal block mounted in the upper half of the signal mounted portion; one side with fast-on terminals, the other side with screw terminals

General Specifications:

Dimensions:
11.1” H x 5.1” W x 2.4” D
Material:
Cast aluminum alloy
Finishes:
Powder coated
Color(s):
Federal yellow, signal green, black or custom colors
Latching System:
Flathead 3/16” hex socket bolt
Mounting:
Band, through-bolt, or lag screw
Shipping Weight:
4.5 lbs

Options:

* Conduit entrance for wood pole mount
* Pedestrian housings can be ordered pre-drilled for easy clamshell attachment
* Federal yellow, signal green, black or custom colors

GTx LED Traffic Signals (300mm) 120V - NEW!

0.00

With the introduction of the all new GTx LED (300mm) traffic signal, GE Lighting Solutions is signaling its commitment to a whole new way of thinking about LED traffic signals. LED signals that are the precursors to a new era of value added flexibility, power savings and ease of installation. GTx LED signals feature a micro-controlled power supply that lets the customer define their signal's basic character.

Dimming? Yes. Fault Logging? Yes. But the customization doesn't stop there. GTx LED signals will also feature option boards that will work with the power supply to permit a host of new functionality. This is GE’s 14th generation of LED signal, leveraging 15 years of experience & over 6,000,000 units sold worldwide So when it comes to both your current and future needs, GTx is ready!

Features:

* 12-inch (300mm) modules
* Up to 90% energy efficiency over incandescent
* Up to 15% energy efficiency over GE’s previous LED signal generations
* Provides LED degradation compensation
* Multiple step and gradual dimming configuration (optional)
* Mask compatible
* Intertek ETL Verified compliant
* Tinted (red, yellow and green) and clear lens
* Replaces incandescent lamps and GE's previous generations in round traffic signal application
* OEM or retrofit installation
* GE quality and reliability
* Made in the United States of America

Outstanding Performance:

• Consumes up to 15% less power than GE’s previous signal generation.
• Intelligent controller measures usage and temperature.
Will automatically adjust to compensate for light output degradation over time.*
• Over-molded electrical connectors prevent water wicking through wires.

Maximum Flexibility:

• New micro-controlled power supply is packed with advanced functionality
that can be unlocked and customized to fit your specific needs.
• Low profile module permits efficient installation into existing traffic housings.
• Power consumption levels allow compatibility with most controllers.
• Offers multiple dimming configurations for ultimate customization.**
• Mask compatible to fit your unique signaling needs.

Meets Rigorous Certification & Testing Standards:

• Intertek ETL Verified compliant.
• Compliant with ITE VTCSH LED Circular Signal Supplement dated June 27th 2005.
• CSA approved.

GTx LED Traffic Signals (200mm) 120V - NEW!

0.00

With the introduction of the all new GTx LED (200mm) traffic signal, GE Lighting Solutions is signaling its commitment to a whole new way of thinking about LED traffic signals. LED signals that are the precursors to a new era of value added flexibility, power savings and ease of installation. GTx LED signals feature a micro-controlled power supply that lets the customer define their signal's basic character.

Dimming? Yes. Fault Logging? Yes. But the customization doesn't stop there. GTx LED signals will also feature option boards that will work with the power supply to permit a host of new functionality. This is GE’s 14th generation of LED signal, leveraging 15 years of experience & over 6,000,000 units sold worldwide So when it comes to both your current and future needs, GTx is ready!

Features:

* 8-inch (200mm) modules
* Up to 90% energy efficiency over incandescent
* Up to 15% energy efficiency over GE’s previous LED signal generations
* Provides LED degradation compensation
* Multiple step and gradual dimming configuration (optional)
* Mask compatible
* Intertek ETL Verified compliant
* Tinted (red, yellow and green) and clear lens
* Replaces incandescent lamps and GE's previous generations in round traffic signal application
* OEM or retrofit installation
* GE quality and reliability
* Made in the United States of America

Outstanding Performance:

• Consumes up to 15% less power than GE’s previous signal generation.
• Intelligent controller measures usage and temperature.
Will automatically adjust to compensate for light output degradation over time.*
• Over-molded electrical connectors prevent water wicking through wires.

Maximum Flexibility:

• New micro-controlled power supply is packed with advanced functionality
that can be unlocked and customized to fit your specific needs.
• Low profile module permits efficient installation into existing traffic housings.
• Power consumption levels allow compatibility with most controllers.
• Offers multiple dimming configurations for ultimate customization.**
• Mask compatible to fit your unique signaling needs.

Meets Rigorous Certification & Testing Standards:

• Intertek ETL Verified compliant.
• Compliant with ITE VTCSH LED Circular Signal Supplement dated June 27th 2005.
• CSA approved.

LED Signal Modules (300mm) Incandescent Look - 12v

0.00

GE 12-inch (300mm) 12v traffic signal modules are available in designs that can meet all current ITE, Caltrans and other key standards for U.S. roads and highways. Traffic management professionals around the world are leaving maintenance intensive and energy hungry incandescent lamps and switching to reliable energy efficient LED signal modules. With up to 90 percent energy savings and long-rated life, GE LED signals outperform incandescent signals and offer significant advantages in performance and maintenance.

Features, Benefits and Values:

• High efficiency & long life LED light source
• Designed to conform to applicable ITE specifications
• Failure of single LED results in loss of light from only that LED
• UV stabilized shell
• Moisture and dust resistant
• Direct retrofit design
• Incandescent look
• Sun phantom protection
• All products shipped with installed gasket
• EPACT 2005 compliant

LED Signal Modules (200mm) Incandescent Look - 12v

0.00

Designed for direct retrofit or OEM applications, GE 8 inch (200mm) 12v traffic signal modules are available in designs that can meet all current ITE, Caltrans and other key standards for U.S. roads and highways. Traffic management professionals around the world are leaving maintenance intensive and energy hungry incandescent lamps and switching to reliable energy efficient LED signal modules. With up to 90 percent energy savings and long-rated life, GE LED signals outperform incandescent signals and offer significant advantages in performance and maintenance.

Features, Benefits and Values:

• High efficiency & long life LED light source
• Designed to conform to applicable ITE specifications
• Failure of single LED results in loss of light from only that LED
• UV stabilized shell
• Moisture and dust resistant
• Direct retrofit design
• Incandescent look
• Sun phantom protection
• All products shipped with installed gasket
• EPACT 2005 compliant

LED Pedestrian Signal 16x18 Side by Side - Full Hand, Full Person

0.00

LED Pedestrian Side by Side signal is a 16 x 18 inch full hand, full person modules providing a cost effective and reliable unit over incandescent lighting systems. Advantages are up to 90% energy savings, longer life, fewer maintenance hassles and lower maintenance costs. U.S. Barricades offer a full line of GE LED Pedestrian Control Signals at discounted prices for your municipality or state D.O.T.

Excellent Appearance & Visibility:

• Robust LED system design enables high luminous intensity over long product life
• Efficient optical system minimizes power consumption while providing excellent
uniformity and viewing angles
• New! Single piece transparent front window with internal masking to prevent:
- icons display from being readily visible when not in operation
- scratches and abrasions compared with external silk screen technology
• Bright and clear icons
• New or retrofit use
• Fully uniform look

Outstanding Reliability & Robust Operation:

• Internal conflict monitor preventing walk and don’t walk indications to light up
at the same time (PS7-CFC1-26A only)
• Individual power supply drives each display to ensure proper indication
• Over-molded electrical connectors providing moisture and dust protection

Meets Rigorous Certification & Testing Standards:

• Intertek ETL Verified compliant (PS7-CFC1-26A only)
• EPACT 2005 compliant
• Caltrans approved - Draft Specifications dated Dec. 2008 (PS7-CFC1-26A-22 only)
• Using MIL-STD-810F and NEMA 250-1991 Type 4 for environmental robustness,
passed reliability and qualification testing including high temperature, high humidity cycling (HTHH for 1,000 hours)
• Production quality compliant to GE Six Sigma requirements
• Compliant with the ITE PTCSI LED Signal Modules
- draft version dated Feb. 2009 (PS7-CFC1-26A only)

LED Pedestrian Signal 12-inch Full Hand, Full Person, Countdown

0.00

LED Pedestrian Signal with Full Hand, Full Person, Overlay, Countdown in12-inch modules providing a cost effective and reliable unit over incandescent lighting systems. Advantages are up to 90% energy savings, longer life, fewer maintenance hassles and lower maintenance costs. U.S. Barricades offer a full line of GE LED Pedestrian Control Signals at discounted prices for your municipality or state D.O.T.

Excellent Appearance & Visibility:

• LED system design enables high luminous intensity over long product life
• Individual power supply drives each display to ensure proper indication
• Efficient optical system minimizes power consumption while providing excellent
uniformity and viewing angles
• New! Single piece transparent front window with internal masking to prevent:
- icons display from being readily visible when not in operation
- scratches and abrasions compared with external silk screen technology
• Bright and clear icons
• New or retrofit use
• Fully uniform look

Meets Rigorous Certification & Testing Standards:

• Intertek ETL Verified compliant
• EPACT 2005 compliant
• Using MIL-STD-810F for environmental robustness, passed reliability and qualification
testing including high temperature, high humidity cycling (HTHH for 1,000 hours)
• Production quality compliant to GE Six Sigma requirements
• Compliant with the ITE PTCSI LED Signal Modules - draft version dated Feb. 2009

LED Pedestrian Countdown Signal 16x18

0.00

LED Pedestrian Countdown Signal is a 16x18 overlay/countdown modules providing a cost effective and reliable unit over incandescent lighting systems. Advantages are up to 90% energy savings, longer life, fewer maintenance hassles and lower maintenance costs. U.S. Barricades offer a full line of GE LED Pedestrian Control Signals at discounted prices for your municipality or state D.O.T. Made in the United States of America.

Excellent Appearance & Visibility:

• Robust LED system design enables high luminous intensity over product life cycle
• Efficient optical system minimizes power consumption while providing excellent
uniformity and viewing angles
• Single piece transparent front window with internal masking to prevent:
- countdown and icons display from being readily visible when not in operation
- scratches and abrasions compared with external silk screen technology
• Bright and clear icons
• New or retrofit use
• Fully uniform look

Outstanding Reliability & Robust Operation:

• Internal conflict monitor preventing walk and don’t walk indications to light up
at the same time
• Individual power supply drives each display to ensure proper indication
• Over-molded electrical connectors providing moisture and dust protection

Meets Rigorous Certification & Testing Standards:

• Intertek ETL Verified compliant
• EPACT 2005 compliant
• Using MIL-STD-810F and NEMA 250-1991 Type 4 for environmental robustness, passed reliability and qualification testing including high temperature, high humidity cycling (HTHH for 1,000 hours)
• Production quality compliant to GE Six Sigma requirements
• Compliant (for Full Hand/Full Person) with the ITE PTCSI LED Signal Modules -
draft version dated Feb. 2009

Pedestrian Signal (16-inch Polycarbonate)

0.00

Polycarbonate Pedestrian Signal Housings are designed to be used in conjunction with standard or LED pedestrian signal modules to promote pedestrian safety at intersections. All housings exceed the Institute of Transportation Engineers (ITE) standards, offering a low maintenance and durable housing in either die cast aluminum or injection molded polycarbonate resin.

All doors are attached with stainless steel detent-type clevis or roll pins and eye bolt/wing nut assemblies. Two equally spaced mounting lugs, integrally cast into the top and bottom of the 16”and the sides of the 12”, allow the doors to hinge from either direction. When clevis pins are used, the door and eye bolt assemblies can be removed and rotated without the use of any tools, facilitating maintenance. All interior mounting locations on the 16” housing are symmetrically positioned, allowing the rotation of components when using the bi-directional clamshell Mount to mount to the right or left side.

    * 16” Rugged polycarbonate construction
    * Terminal block with quick-disconnect fittings on one side of each terminal position
    * Designed for standard symbol or word pedestrian signal modules including LED
    * Door-hinge hardware can be removable and reversible or permanently attached
    * Highly customizable including a variety of fabrication, mounting, and visor options
    * Stainless steel hardware includes hinge pins and eye bolt/wing nuts (latch)

Pedestrian Signal (12-inch Polycarbonate)

0.00

Polycarbonate Pedestrian Signal Housings are designed to be used in conjunction with standard or LED pedestrian signal modules to promote pedestrian safety at intersections. All housings exceed the Institute of Transportation Engineers (ITE) standards, offering a low maintenance and durable housing in either die cast aluminum or injection molded polycarbonate resin.

All doors are attached with stainless steel detent-type clevis or roll pins and eye bolt/wing nut assemblies. Two equally spaced mounting lugs, integrally cast into the top and bottom of the 16”and the sides of the 12”, allow the doors to hinge from either direction. When clevis pins are used, the door and eye bolt assemblies can be removed and rotated without the use of any tools, facilitating maintenance. All interior mounting locations on the 16” housing are symmetrically positioned, allowing the rotation of components when using the bi-directional clamshell Mount to mount to the right or left side.

    * 12” Rugged polycarbonate construction
    * Terminal block with quick-disconnect fittings on one side of each terminal position
    * Designed for standard symbol or word pedestrian signal modules including LED
    * Door-hinge hardware can be removable and reversible or permanently attached
    * Highly customizable including a variety of fabrication, mounting, and visor options
    * Stainless steel hardware includes hinge pins and eye bolt/wing nuts (latch)

Pedestrian Signal (16-inch Aluminum)

0.00

Pedestrian Signal Housings are designed to be used in conjunction with standard or LED pedestrian signal modules to promote pedestrian safety at intersections. All housings exceed the Institute of Transportation Engineers (ITE) standards, offering a low maintenance and durable housing in either die cast aluminum or injection molded polycarbonate resin.

All doors are attached with stainless steel detent-type clevis or roll pins and eye bolt/wing nut assemblies. Two equally spaced mounting lugs, integrally cast into the top and bottom of the 16”and the sides of the 12”, allow the doors to hinge from either direction. When clevis pins are used, the door and eye bolt assemblies can be removed and rotated without the use of any tools, facilitating maintenance. All interior mounting locations on the 16” housing are symmetrically positioned, allowing the rotation of components when using the bi-directional clamshell Mount to mount to the right or left side.

    * 16" Rugged aluminum construction
    * Terminal block with quick-disconnect fittings on one side of each terminal position
    * Designed for standard symbol or word pedestrian signal modules including LED
    * Door-hinge hardware can be removable and reversible or permanently attached
    * Highly customizable including a variety of fabrication, mounting, and visor options
    * Stainless steel hardware includes hinge pins and eye bolt/wing nuts (latch)

Pedestrian Signal (12-inch Aluminum)

0.00

Aluminum Pedestrian Signal Housings are designed to be used in conjunction with standard or LED pedestrian signal modules to promote pedestrian safety at intersections. All housings exceed the Institute of Transportation Engineers (ITE) standards, offering a low maintenance and durable housing in either die cast aluminum or injection molded polycarbonate resin.

All doors are attached with stainless steel detent-type clevis or roll pins and eye bolt/wing nut assemblies. Two equally spaced mounting lugs, integrally cast into the top and bottom of the 16”and the sides of the 12”, allow the doors to hinge from either direction. When clevis pins are used, the door and eye bolt assemblies can be removed and rotated without the use of any tools, facilitating maintenance. All interior mounting locations on the 16” housing are symmetrically positioned, allowing the rotation of components when using the bi-directional clamshell Mount to mount to the right or left side.

    * 12” Rugged aluminum construction
    * Terminal block with quick-disconnect fittings on one side of each terminal position
    * Designed for standard symbol or word pedestrian signal modules including LED
    * Door-hinge hardware can be removable and reversible or permanently attached
    * Highly customizable including a variety of fabrication, mounting, and visor options
    * Stainless steel hardware includes hinge pins and eye bolt/wing nuts (latch)

LED Signal Modules (300mm) Incandescent Look - AC

0.00

Designed for direct retrofit or OEM applications, GE 12 inch (300mm) traffic signals are available in designs that can meet all current ITE, Caltrans and other key standards for U.S. roads and highways. Traffic management professionals around the world are leaving maintenance intensive and energy hungry incandescent lamps and switching to reliable energy efficient LED signal modules. With up to 90 percent energy savings and long-rated life, GE LED signals outperform incandescent signals and offer significant advantages in performance and maintenance.

Features, Benefits and Values:

• High efficiency & long life LED light source
• Designed to conform to applicable ITE specifications
• Failure of single LED results in loss of light from only that LED
• UV stabilized shell
• Moisture and dust resistant
• Direct retrofit design
• Incandescent look
• Sun phantom protection
• All products shipped with installed gasket
• EPACT 2005 compliant

LED Signal Modules (200mm) Incandescent Look - AC

0.00

Designed for direct retrofit or OEM applications, GE 8 inch (200mm) traffic signals are available in designs that can meet all current ITE, Caltrans and other key standards for U.S. roads and highways. Traffic management professionals around the world are leaving maintenance intensive and energy hungry incandescent lamps and switching to reliable energy efficient LED signal modules. With up to 90 percent energy savings and long-rated life, GE LED signals outperform incandescent signals and offer significant advantages in performance and maintenance.

Features, Benefits and Values:

• High efficiency & long life LED light source
• Designed to conform to applicable ITE specifications
• Failure of single LED results in loss of light from only that LED
• UV stabilized shell
• Moisture and dust resistant
• Direct retrofit design
• Incandescent look
• Sun phantom protection
• All products shipped with installed gasket
• EPACT 2005 compliant

GT1 Arrow Signals - Incandescent Look

0.00

Designed for direct retrofit or OEM applications, GE Lighting Solutions GT1 signals are available in designs that can meet all current ITE, Caltrans and other key standards for U.S. roads and highways. Traffic management professionals around the world are leaving maintenance intensive and energy hungry incandescent lamps and switching to reliable energy efficient LED signal modules. With up to 90 percent energy savings and long-rated life, GE LED signals outperform incandescent signals and offer significant advantages in performance and maintenance.

Excellent Appearance & Visibility:

• Efficient optical design allows omnidirectional arrow placement with maximum
light output and expanded view
• Expanded view for fixed and span wire applications meets new ITE requirements
• Excellent color uniformity creates an incandescent look for easy readability
• Improved luminous intensity uniformity exceeds new ITE requirements
• New or retrofit use

Outstanding Reliability & Operation:

• High efficiency and high-brightness LED light source
• Improved failed state impedance protection detects the loss of LED load
• Optimized thermal management for longer life
• O-ring gasket and over-molded electrical connector provide
increased moisture and dust protection
• Provides performance under extreme field temperature conditions

Meets Rigorous Certification & Testing Standards:

• Intertek ETL Verified compliant
• EPACT 2005 compliant
• CSA approved
• Using MIL-STD-810F for environmental robustness, passed reliability
and qualification testing including high temperature, high humidity cycling
• Compliant with the new ITE VTCSH LED Vehicle Arrow Traffic Signal Supplement
dated July 1, 2007

Traffic Signal (Polycarbonate)

0.00

Polycarbonate traffic signal housings are available in eight and twelve inch varieties, provide a durable and low-maintenance housing for standard LED modules as well as incandescent optical assemblies. Manufactured in polycarbonate, the housings are compliant with multiple agency standards including the Institute of Transportation Engineers (ITE), Caltrans, and most state Departments of Transportation (DOTs). An industry leader in signal manufacturing and supply, U.S. Barricades offers an extensive range of materials, configurations, and accessories, including backplates, visors, and signal assemblies, to meet your traffic signal requirements.

Standard Features:

* Modular sections, one-piece polycarbonate
* 72-tooth serrated boss and reinforcing ribs, top and bottom
* Brass threaded inserts for visor attachment (4)
* Housings have a cast boss for mounting a 5 or 6-position terminal block; one side of terminal block with fast-on terminals, the other side with screw terminals
* The words red, amber, and green are cast next to each boss to identify light source lead wires
* 5 or 6-position terminal block installed in center section (1) (alternate mounting is available)
* Stainless steel door roll pins and eye bolt/wing nut assemblies
* Integral lugs on the housing and doors with stainless steel roll pins provide effective door hinges
* Weathertight E.P.D.M. rubber door gasket
* Aluminum and polycarbonate, and 8” and 12” housings can be mixed in one signal head

General Specifications:

Dimensions:
(1-section)
8”: 13.5” H x 13.5” W x 7.0” D
12”: 10.0” H x 10.0” W x 7.0” D
Material:
Polycarbonate, Ultraviolet and heat stabilized, flame retardant, permanently colored
Color(s):
Federal yellow, signal green, black, or custom colors
Mounting:
2.0” hole top and bottom fits 1.5” NPT fittings
Environmental:
Operating temperature: -37o C to +74o C
Humidity: 0 to 95% (non-condensing)
Shipping Weight:
Polycarbonate: 8” - 2.1 lbs 12” - 4.2 lbs

Options:

* Location, quantity, and type of terminal blocks
* Door mounting hardware: Push pin (removable) or roll pin (permanent)
* Visors
* Backplates
* Mounting: Various framework, orientation, and configurations
* Light Source: LED or incandescent
* High-performance (highly directional) signal version

Benefits:

* Modular design, flexible configuration options: one to five sections, vertical, horizontal, and doghouse
* Fabricated from polycarbonate
* 8” or 12” diameter
* Weathertight doors
* Custom hardware and terminal block location available

Cap Mushroom Flasher (12V)

185.00

12V Cap Flashers are designed for battery or solar powered traffic light or warning beacon systems that need MUTCD standard 56 flashes/minute. U.S. Barricade 12v DC cap flashers are very reliable, circuitry is encapsulated with epoxy to provide a rugged, maintenance-free unit capable of withstanding the harshest environment. Standard twelve sided mushroom signal caps provide the housing for both single and dual circuit versions, fuse protection is provided. Our Cap flashers meets or exceeds all MUTCD specifications for U.S. roads and highways.

Easy to install, the flasher fits into any traffic signal head at the top or bottom of the framework opening. The Mushroom Flasher connects to the terminal block in the signal head, no extra electrical boxes or parts are required. Units have a #8 ring terminal attached to more than twelve inches of hook-up wire for each lead, lock ring and gasket are included. All flashers have been tested and ready to use. Proudly made in the United States of America.

Specifications:

Line Voltage:
12V DC
Load Current:
3 Amps, Zero Voltage Switching
Temperature:
Range -30 °F to +165 °F
Dimensions:
1 7/8" Overall Height
Mounting:
1.5” NPT
Finishes:
Powder coated
Colors:
Federal yellow, signal green, or black
Flash Rate:
56¼ Flashes/Minute Standard
150 Flashes/Minute (Optional)
15 inch leads with spade terminals (4)
Red Wire    DC Line
White Wire    DC Common
Black Wire    Load(s)
In-line fuse (5 A, 250 V, Slo-Blo, ¼”x1¼”; Bussman MDL-5)

Typical Applications and Benefits:

    * Solar Flashing beacons
    * Solar Warning lights
    * Pedestrian and school crossing signals
    * Four-way stop signals
    * MUTCD compliant
    * Easy to install
    * Requires no additional electrical boxes or parts, just plug-in and go
    * Facilitates the installation of traffic warning signals

$185.00 Each

Cap Mushroom Flasher (AC)

140.00

Cap flashers are designed to be installed into the signal head or warning beacons for MUTCD standard 56 flashes/minute. U.S. Barricade flashers are very reliable, circuitry is encapsulated with epoxy to provide a rugged, maintenance-free unit capable of withstanding the harshest environment. Standard twelve sided mushroom signal caps provide the housing for both single and dual circuit versions, fuse protection is provided. Our Cap flashers meets or exceeds all MUTCD specifications for U.S. roads and highways.

Easy to install, the flasher fits into any traffic signal head at the top or bottom of the framework opening. The Mushroom Flasher connects to the terminal block in the signal head, no extra electrical boxes or parts are required. Units have a #8 ring terminal attached to more than twelve inches of hook-up wire for each lead, lock ring and gasket are included. All flashers have been tested and ready to use. Proudly made in the United States of America.

Specifications:

Line Voltage:
95-135 VAC
Load Current:
3 Amps, Zero Voltage Switching
Temperature:
Range -30 °F to +165 °F
Dimensions:
1 7/8" Overall Height
Mounting:
1.5” NPT
Finishes:
Powder coated
Colors:
Federal yellow, signal green, or black
Flash Rate:
56¼ Flashes/Minute Standard
150 Flashes/Minute (Optional)
15 inch leads with spade terminals (4)
Red Wire    AC Line
White Wire    AC Common
Black Wire    Load(s)
In-line fuse (5 A, 250 V, Slo-Blo, ¼”x1¼”; Bussman MDL-5)

Typical Applications and Benefits:

    * Flashing beacons
    * Warning lights
    * Pedestrian and school crossing signals
    * Four-way stop signals
    * Turns any traffic signal into a flashing signal
    * MUTCD compliant
    * Easy to install
    * Requires no additional electrical boxes or parts, just plug-in and go
    * Facilitates the installation of traffic warning signals

   $140.00 Each

Panel Mount Flashers (AC)

0.00

Our Panel Mount Flashers contain all flashing and load switching circuitry in a compact cube style package. These flashers may be used for flashing two tungsten lamps, LED, or inductive loads. Single circuit operation is possible by connecting only one load, thereby providing a spare circuit should overload of the connected circuit occur. U.S. Barricades Panel Mount Flashers are the most reliable and cost effective way to operate your warning beacon systems and meets or exceeds all MUTCD specifications for U.S. roads and highways.

These are chassis mount flashers with a small footprint of just 1¾ inches by 2¼ inches. Mounting on a flat metal surface is simple through the two #8 clearance holes provided. Usage of a high thermal conductivity grease is required between the flasher and chassis to help dissipate heat for long trouble-free operation. Besides mounting to a cabinet wall, these flashers may be used to upgrade electro-mechanical flashers to solid state reliability. These flashers are epoxy filled giving a rugged unit capable of withstanding the harsh environmental performance requirements of NEMA and 170 Type specifications. Made in the United States.

Specifications:

Operating Voltage:
60 - 135 VAC
Load Current:
25 Amps (with adequate heat sinking at 77 °F.)
Temperature Range:
-30 °F to 165 °F.
Flash Rate:
56¼ flashes/minute Standard
150 flashes/minute Optional (P/N AC-25DF-2.5X).
450 flashes/minute Optional (P/N AC-25DF-8X)

Dayboard Channel Marker (Starboard)

0.00

Dayboard channel marker (Starboard) are made with durable rust proof .080 aluminum and 3M High Intensity sheeting. US Barricade channel markers exceed all U.S. Coast Guard specifications for marine and Intracoastal Waterway navigation. For more information on channel markers call 203-883-8660, made in the United States.

Specifications:

• Channel Marker Sizes - 24"x 24", 30"x 30", 36"x 36" and 48"x 48".
• Our aluminum markers are made with thick .080 mil aluminum.
• All markers carry full warranty to last for years.
• Mounting holes centered top and bottom for easy installations.
• Optional aluminum thickness available upon request.
• Made with High Intensity sheeting.
• All reflective channel markers comply with the latest Coast Guard specifications.
• Made in the United States of America

Dayboard Channel Marker (Port)

0.00

Dayboard channel marker (Port Side) isosceles triangle marker are made with durable rust proof .080 aluminum and 3M High Intensity sheeting. US Barricade channel markers exceed all U.S. Coast Guard specifications for marine and Intracoastal Waterway navigation. For more information on channel markers call 203-883-8660, made in the United States.

Specifications:

• Channel Marker Sizes - 24"x 24", 30"x 30", 36"x 36" and 48"x 48".
• Our aluminum markers are made with thick .080 mil aluminum.
• All markers carry full warranty to last for years.
• Mounting holes centered top and bottom for easy installations.
• Optional aluminum thickness available upon request.
• Made with High Intensity sheeting.
• All reflective channel markers comply with the latest Coast Guard specifications.
• Made in the United States of America

Navigation Barge Light (Red Incandescent)

250.00

Our portable red navigation light (Port) have been tested and certified by a U.S.C.G. laboratory and exceeds all U.S. Coast Guard specifications for marine navigation use. Navigation lights can operate on both 6 volt spring-type batteries or 12 volt rechargeable battery in a very durable watertight case.

Specifications:

    * Visibility exceeds 3 nautical miles for vessels 50 meters or more in length
    * Optically-correct lenses for the "ultimate" in photometrics
    * Lens has built-in screens for each light application
    * Candle lock-in feature locates filament in lens design position
      (makes bulbs replacement fast and accurate)!
    * Capable of operating on one to four spring terminal batteries
    * External stainless steel hardware throughout
    * Top case & name plate color coded for ease of installation
    * Up to 30 days sidelight usage with Ray-O-Vac 6V HDM batteries
    * Up to 160 days special flashing light usage with Ray-O-Vac 6V HDM batteries
    * Made in the United State of America

    $250.00 Each

Barge Navigation Light (Green Incandescent)

250.00

Our portable green navigation lights (Starboard) have been tested and certified by a U.S.C.G. laboratory and exceeds all U.S. Coast Guard specifications for marine navigation use. Navigation lights can operate on both 6 volt spring-type batteries or 12 volt rechargeable battery in a very durable watertight case.

Specifications:

    * Visibility exceeds 3 nautical miles for vessels 50 meters or more in length
    * Optically-correct lenses for the "ultimate" in photometrics
    * Lens has built-in screens for each light application
    * Candle lock-in feature locates filament in lens design position
      (makes bulbs replacement fast and accurate)!
    * Capable of operating on one to four spring terminal batteries
    * External stainless steel hardware throughout
    * Top case & name plate color coded for ease of installation
    * Up to 30 days sidelight usage with Ray-O-Vac 6V HDM batteries
    * Up to 160 days special flashing light usage with Ray-O-Vac 6V HDM batteries
    * Made in the United State of America

    $250.00 Each

Barge Navigation Light (Amber Incandescent)

250.00

Our portable amber navigation light (Towing Light) have been tested and certified by a U.S.C.G. laboratory and exceeds all U.S. Coast Guard specifications for marine navigation use. Navigation lights can operate on both 6 volt spring-type batteries or 12 volt rechargeable battery in a very durable watertight case.

Specifications:

    * Visibility exceeds 3 nautical miles for vessels 50 meters or more in length
    * Optically-correct lenses for the "ultimate" in photometrics
    * Lens has built-in screens for each light application
    * Candle lock-in feature locates filament in lens design position
      (makes bulbs replacement fast and accurate)!
    * Capable of operating on one to four spring terminal batteries
    * External stainless steel hardware throughout
    * Top case & name plate color coded for ease of installation
    * Up to 30 days sidelight usage with Ray-O-Vac 6V HDM batteries
    * Up to 160 days special flashing light usage with Ray-O-Vac 6V HDM batteries
    * Made in the United State of America

     $250.00 Each

Steel Legs and Uprights for Type III Barricade

50.00

U.S. Barricade Steel Type III Barricade assemblies offer the strength of rail steel and quality that matters. Used in the highway safety industry throughout the United States, our Type III Barricade set consists of 2 legs and 2 feet, we offer a white powder coat barricade assembly with a standardized punching pattern and package size. U.S. Barricades also has the capability to manufacture and fabricate to your exact specifications. All steel is made in the United States.

Specifications: Type III Barricade Set (2 Legs, 2 Feet)

Uprights (2 required)
1-1/2 x 1-1/2 .125g 63"

Foot Sections (2 Required)
1-1/2 x 1-1/2 .125g 60"

Hole Dimensions:

Uprights Leg #1(12) 13/32" (2) 9/16" 5, 9, 14, 18, 25, 29, 34, 38 45, 49, 54, 58, 62" from one end.
Uprights Leg #2 (2) 9/16" holes; 45 degree cope on each end, 23/32" from each end.

Foot Sections 2" x 2" square tubing; 8" tall

$50.00 per set

Reflective Sand Barrel Impact Attenuator 200/400/700lbs w/Lid

0.00

Our reflective sand barrel is a highly visible Impact Attenuator and will accommodate all weight requirements with one size barrel. This will eliminate the need to stock different size barrels and reduces inventory costs and confusion. Fully certified and tested to meet or exceed all NCHRP-350 Level 3 requirements.

• Made with 3M High Intensity Sheeting.
• Universal sand barrel accommodates all weight requirements.
• Sand weight verification is easy, just use the right configuration insert for correct weight.
• Sand leaking is eliminated because each sand container is one piece — no edge seals.
• Optional lifting and dumping ring available for easy lifting and emptying.
• Blow-molded manufacturing yields a stronger sand barrel.
• UV stabilizers maximize product life. Color-stable pigments resist fading.
• Made in the United States

Solar Powered Portable Matrix Message Board

0.00

Our solar powered matrix message signs offer full graphic capability, are one hundred percent NTCIP-compliant and can be easily controlled by any NTCIP-compliant traffic management software. Our solid design, plug and play components, and energy efficient technology provide a sign that requires minimal maintenance and has a low cost to own.

Structure

Overall length: 3327.4 mm (131")
Overall width: 1676 mm (66")
Display panel: 1092 mm x 1854 mm (43" x 73")
Panel construction: Aluminum
Traveling height: 2362 mm (93")
Operating height: 3886 mm (153")
Weight: 580 kg (1280 lb.)
Coupler: 2" coupler or 3" pintle eye
Axle/suspension: 1587.6 kg (3500 lb.)
Heavy-duty frame with extended guard rails for fender and axle protection
Lockable control box.

Display

Full matrix (30 X 56 pixels)
Up to 3 lines of 12 characters per line
4 LEDs per pixel with 30° wide viewing angle
8.75" character default font
Display sign rotates 360 degrees
Easy access and walk-way for maintenance
Plug & play display modules
On-site interface for self-error detection system and test pattern

Programming

On-site using unit keyboard or laptop (RS-232 connection)
Ethernet cross-over connections
Easy three-step programming category
High-speed remote programming from your PC with cellular option
Ethernet port (10/100)
2x additional RS-232 ports

Solar power supply

Tilt and Rotate solar panel rack
Various configurations of solar panels and batteries are available
Solar regulator with battery surcharge protection

Features

Changeable messages (default 255) (*1-999)
Permanent messages (default 258) (*1-999)
Volatile messages (default 64) (*1-999)
Changeable graphic pictograph (255)
Permanent graphic pictograph (89)
Permanent Font sizes (15)
Custom Changeable Font sizes (*5)
Per character font sizing
Per character & line flashing
Admin & User level password
Auto brightness (photocell)
Manual 0%-100% brightness levels (increments of 1%)
Scheduling
Scrolling
Special dynamic data features trigger messages, display motorist speed, actual temperature, time & date & live countdown
NTCIP compatibility (see detailed specs)
Easy integration to Software management
Already Supported by: Delcan, IBI, etc.
*Requires setting at factory

CABINETS

Aluminum sign and control cabinets
Locked with padlocks
Plastic battery boxes

Optional: steel battery boxes, safety locking bars

Weather stripping seals each compartment against moisture

AXLE

Single 1588 kg (3500 lb)
Optional: hydraulic brakes

HITCH

Heavy-duty hitch capacity with 72 mm (3") pintle eye

Optional: 51 mm (2") ball coupler

1361 kg (3000-lb) maximum tongue load
Heavy-duty safety chains with safety hooks meeting safety standards

TIRES & WHEELS

Tires: Load Range D 381 mm (15")
Wheel Size: 381 mm (15")
6-stud tire rims

Optional: Anti-theft locking mechanism

LEVELING JACKS

Four-screw jacks, each rated at 907 kg (2000 lbs)

Optional: Tongue wheel jack

TRAILER LIGHTS

State-of-the-art halogen lighting as per USDOT standards and specifications
Custom-made connections complying with customer specifications

LIFT MECHANISM

Electro-hydraulic lift
- Optional: Manual winch

SOLAR PANELS

Various configurations of solar panels and batteries available
High efficiency single-crystal silicon cells anti-reflection coated for improved efficiency

BATTERIES

6-volt 220 amp/hour deep-cycle batteries wired to provide a 12-volt system

Optional: Various batteries and configurations available

CONTROLLER
MENU DISPLAY (LCD)

Current usage and battery voltage
Solar array current output (to the battery) and voltage
Sign status (error detection)
Current message display

CONTROLS

Main power switch
Raise / lower switch
Can switch from laptop to cellular (local communication RS- communication 232)
LCD Display
Keyboard
Charger switch

Options

3G modem, can support fiber-optic, radio communication
Free access to our remote fleet management software Jamlogic2 (1._PDF)
Radar http://www.houston-radar.com/gpage4.html
Data logger (requires radar)
GPS tracking
Easy graphic LCD touchscreen
Intelligent display sign with pixel detection
Battery charger
Adjustable pintle hitch
2" coupler or 2 5/16" coupler
Traffic camera
Safety lock: Wheel, battery boxes, etc..
Spare tire
Tongue wheel jack
Level (to stabilize sign)

Programmable Traffic Signal

0.00

Programmable Traffic Signals are rugged, high performance, directional traffic signals used to limit signal visibility to specific target areas and increase intersection safety. These 12-inch diameter traffic signals feature a focused and directional beam for precise lane control or to avoid motorist confusion when two intersections are in close proximity.

Benefits with Programmable signals provide superior visibility Helps reduce accidents and improve traffic flow Modular design allows several configuration options Fabricated from corrosion-resistant aluminum Weathertight doors Available with a full range of accessories including; backplates, visors, and mounting hardware.

Features:

• Programmable signals provide superior visibility
• Helps reduce accidents and improve traffic flow
• Modular design allows several configuration options
• Fabricated from corrosion-resistant aluminum
• Weathertight doors
• Available with a full range of accessories including; backplates, visors, and mounting hardware

Aluminum Programmable Traffic Signals are modular in design allowing them to be assembled in many different configurations. Signals are compatible with 115 VAC, three-prong, incandescent bulbs, and LED assemblies.

Programming is accomplished through the use of a Fresnel lens and a smaller clear lens. Masked-off portions of the smaller lens control which signal faces each lane sees during approach.

Signal sections can be tilted in two degree increments for a maximum of ten degrees above and below the horizontal axis while still maintaining a common vertical axis.

The incandescent version of the signal head has an automatic dimming circuit to adjust light output according to environment conditions.

Specifications:

Dimensions:
13.3” H x 13.3” W x 18.0“ D (1 section)
Housing Material:
Cast aluminum, type 360, increased powder coat adhesion, door hardware: stainless steel
Finish(es):
Powder coated
Color(s):
Federal yellow, signal green, black, or custom colors
Access:
Front door (1), rear door (1)
Lamp:
PAR-46, 115 VAC, 150 W
Finish:
Powder coated
Environmental:
Operating temperature: -37o C to +74o C, Humidity: 0 to 95% (non-condensing)
Shipping Weight:
23 lbs (1-section)

Options:

• Visors
• Backplates
• Light Source: LED or incandescent
• Mounting: Preset tilt angle (none: 0°, standard: 4°, MAS arm mount: 8°), various framework and fittings, orientation, and configurations.

School Zone Warning Beacon System 300mm (12v Solar)

0.00

U.S. Barricades Solar School Zone Warning Beacon system is a cost effective solution for all types traffic safety applications. Can be made in a single or dual flashing beacon configuration, our 12v solar powered systems are 100% made in the United State and guarantee to be the most durable and reliable units in the industry.

Warning beacons are programmed to activate according to a user-specified calendar with easy to use keypad or use our time management software. Recent studies demonstrate an average reduction of 7-10 MPH when flashing beacons were used compared with signage alone. School zone flashing beacons will reduce speeds and keep your school zones safe! For more information and prices call U.S. Barricades at 203-883-8660.

Beacon:

* Aluminum powder coated Beacon Heads
    * Lens Size - 12" Beacon
    * Power - 12v
    * Federal yellow, signal green, black, or custom colors
    * 2.0” hole top and bottom fits 1.5” NPT fittings
    * Terminal block installed
    * Stainless steel door roll pins and eye bolt/wing nut assemblies
    * Weathertight E.P.D.M. rubber door gasket.

Options:

    * Various signal modules - LED, incandescent.
    * Signal insert colors - red, yellow, green and arrows.
    * Visor - tunnel, cap and full circle.
    * Time clock module without dimming relay.
    * Two flashing beacons.
    * 365 day solid state programmable time clock
    * Photocell.

Benefits:

    * Increases roadside safety by warning drivers of hidden or approaching hazards.
    * Rugged high-quality signal housing.
    * Reliable solid-state flasher control.
    * Multiple configurations for mounting framework.

School Zone Warning Beacon System 200mm (12V Solar)

0.00

U.S. Barricades School Zone Warning Beacon system is a cost effective solution for all types traffic safety applications. Can be made in a single or dual flashing beacon configuration, our systems are 100% made in the United State and guarantee to be the most durable and reliable units in the industry.

Warning beacons systems are programmed to activate according to a user-specified calendar with easy to use keypad or use our time management software. Recent studies demonstrate an average reduction of 7-10 MPH when flashing beacons were used compared with signage alone. School zone flashing beacons will reduce speeds and keep your school zones safe! For more information and prices call U.S. Barricades at 203-883-8660.

Beacon:

* Aluminum powder coated Beacon Heads
    * Lens Size - 8" Beacon
    * Power - 12v Solar
    * Federal yellow, signal green, black, or custom colors
    * 2.0” hole top and bottom fits 1.5” NPT fittings
    * Terminal block installed
    * Stainless steel door roll pins and eye bolt/wing nut assemblies
    * Weathertight E.P.D.M. rubber door gasket.

Options:

    * Various signal modules - LED, incandescent.
    * Signal insert colors - red, yellow, green and arrows.
    * Visor - tunnel, cap and full circle.
    * Time clock module without dimming relay.
    * Two flashing beacons.
    * 365 day solid state programmable time clock
    * Photocell.

Benefits:

    * Increases roadside safety by warning drivers of hidden or approaching hazards.
    * Rugged high-quality signal housing.
    * Reliable solid-state flasher control.
    * Multiple configurations for mounting framework.

Warning Beacon - Aluminum 12 inch (12v)

0.00

Beacon:

* Aluminum powder coated.
    * 12" lens.
    * Federal yellow, signal green, black, or custom colors
    * 2.0” hole top and bottom fits 1.5” NPT fittings
    * Terminal block installed
    * Stainless steel door roll pins and eye bolt/wing nut assemblies
    * Weathertight E.P.D.M. rubber door gasket.

Options:

    * Various signal modules - LED, Incandescent - IL.
    * Signal insert colors - red, yellow, green and arrows.
    * Visor - tunnel, cap and full circle.
    * Time clock module without dimming relay.
    * Two flashing beacons.
    * 365 day solid state programmable time clock
    * Photocell.

Benefits:

    * Increases roadside safety by warning drivers of hidden or approaching hazards
    * Rugged high-quality signal housing
    * Reliable solid-state flasher control
    * Multiple configurations for mounting framework

Warning Beacon - Polycarbonate 12 inch (vac)

0.00

Specification:

* Material - Polycarbonate.
    * Size - 12" lens.
    * Power - 120 vac.
    * Federal yellow, signal green, black, or custom colors.
    * 2.0” hole top and bottom fits 1.5” NPT fittings.
    * Terminal block installed.
    * Stainless steel door roll pins and eye bolt/wing nut assemblies.
    * Weathertight E.P.D.M. rubber door gasket.

Options:

    * Various signal modules - LED, incandescent - IL.
    * Signal insert colors - red, yellow, green and arrows.
    * Visor - tunnel, cap and full circle.
    * Time clock module without dimming relay.
    * Two flashing beacons.
    * 365 day solid state programmable time clock
    * Photocell.

Benefits:

    * Increases roadside safety by warning drivers of hidden or approaching hazards.
    * Rugged high-quality signal housing.
    * Reliable solid-state flasher control.
    * Multiple configurations for mounting framework.

Warning Beacon - Aluminum 12 inch

0.00

Traffic warning beacon attracts attention to important roadside signs or information and is ideal for a range of traffic applications. Road safety is heavily reliant on a driver’s compliance with roadside signs, including speed limits, merging traffic and stoplights. Our warning beacon increases driver awareness and thereby enhances overall roadside safety. Made in the United States.

Beacon:

* Aluminum powder coated.
    * 12" lens.
    * Federal yellow, signal green, black, or custom colors
    * 2.0” hole top and bottom fits 1.5” NPT fittings
    * Terminal block installed
    * Stainless steel door roll pins and eye bolt/wing nut assemblies
    * Weathertight E.P.D.M. rubber door gasket.

Options:

    * Various signal modules - LED, Incandescent - IL.
    * Signal insert colors - red, yellow, green and arrows.
    * Visor - tunnel, cap and full circle.
    * Time clock module without dimming relay.
    * Two flashing beacons.
    * 365 day solid state programmable time clock
    * Photocell.

Benefits:

    * Increases roadside safety by warning drivers of hidden or approaching hazards
    * Rugged high-quality signal housing
    * Reliable solid-state flasher control
    * Multiple configurations for mounting framework

Warning Beacon - Polycarbonate 8 inch (12v)

0.00

Traffic warning beacon attracts attention to important roadside signs or information and is ideal for a range of traffic applications. Road safety is heavily reliant on a driver’s compliance with roadside signs, including speed limits, merging traffic and stoplights. Our warning beacon increases driver awareness and thereby enhances overall roadside safety. Made in the United States.

Beacon:

* Material - Polycarbonate.
    * Size - 8 inch lens.
    * Power - 12v
    * Federal yellow, signal green, black, or custom colors
    * 2.0” hole top and bottom fits 1.5” NPT fittings
    * Terminal block installed
    * Stainless steel door roll pins and eye bolt/wing nut assemblies
    * Weathertight E.P.D.M. rubber door gasket.

Options:

    * Various signal modules - LED, incandescent.
    * Signal insert colors - red, yellow, green and arrows.
    * Visor - tunnel, cap and full circle.
    * Time clock module without dimming relay.
    * Two flashing beacons.
    * 365 day solid state programmable time clock
    * Photocell.

Benefits:

    * Increases roadside safety by warning drivers of hidden or approaching hazards.
    * Rugged high-quality signal housing.
    * Reliable solid-state flasher control.
    * Multiple configurations for mounting framework.

Warning Beacon - Polycarbonate 8 inch (vac)

0.00

Traffic warning beacon attracts attention to important roadside signs or information and is ideal for a range of traffic applications. Road safety is heavily reliant on a driver’s compliance with roadside signs, including speed limits, merging traffic and stoplights. Our warning beacon increases driver awareness and thereby enhances overall roadside safety. Made in the United States.

Beacon:

* Material - Polycarbonate.
    * Size - 8 inch lens.
    * Power - 120 vac.
    * Federal yellow, signal green, black, or custom colors.
    * 2.0” hole top and bottom fits 1.5” NPT fittings.
    * Terminal block installed.
    * Stainless steel door roll pins and eye bolt/wing nut assemblies.
    * Weathertight E.P.D.M. rubber door gasket.

Options:

    * Various signal modules - LED, incandescent.
    * Signal insert colors - red, yellow, green and arrows.
    * Visor - tunnel, cap and full circle.
    * Time clock module without dimming relay.
    * Two flashing beacons.
    * 365 day solid state programmable time clock
    * Photocell.

Benefits:

    * Increases roadside safety by warning drivers of hidden or approaching hazards.
    * Rugged high-quality signal housing.
    * Reliable solid-state flasher control.
    * Multiple configurations for mounting framework.

Warning Beacon System (24/7 Operation)

0.00

Advance Warning Beacon system is ideal for a wide range of traffic applications. Either in a single or dual configuration, the flashing beacon(s) draws the motorist’s attention to a warning sign alerting them to an approaching hazard. A powder coated, aluminum Flashing Beacon Control Box featuring solid state electronics to control the flashing of the signal head, is mounted on the back of the pole. Made in the United States.

Beacon:

* Aluminum powder coated.
    * Lens Size - 8"
    * Power - 12v
    * Federal yellow, signal green, black, or custom colors
    * 2.0” hole top and bottom fits 1.5” NPT fittings
    * Terminal block installed
    * Stainless steel door roll pins and eye bolt/wing nut assemblies
    * Weathertight E.P.D.M. rubber door gasket.

Options:

    * Various signal modules - LED, incandescent.
    * Signal insert colors - red, yellow, green and arrows.
    * Visor - tunnel, cap and full circle.
    * Time clock module without dimming relay.
    * Two flashing beacons.
    * 365 day solid state programmable time clock
    * Photocell.

Benefits:

    * Increases roadside safety by warning drivers of hidden or approaching hazards.
    * Rugged high-quality signal housing.
    * Reliable solid-state flasher control.
    * Multiple configurations for mounting framework.

Warning Beacon - Aluminum 8 inch (vac)

0.00

Traffic warning beacon attracts attention to important roadside signs or information and is ideal for a range of traffic applications. Road safety is heavily reliant on a driver’s compliance with roadside signs, including speed limits, merging traffic and stoplights. Our warning beacon increases driver awareness and thereby enhances overall roadside safety. Made in the United States.

Beacon:

* Aluminum powder coated.
    * 8 inch lens.
    * Federal yellow, signal green, black, or custom colors
    * 2.0” hole top and bottom fits 1.5” NPT fittings
    * Terminal block installed
    * Stainless steel door roll pins and eye bolt/wing nut assemblies
    * Weathertight E.P.D.M. rubber door gasket.

Options:

    * Various signal modules - LED, incandescent.
    * Signal insert colors - red, yellow, green and arrows.
    * Visor - tunnel, cap and full circle.
    * Time clock module without dimming relay.
    * Two flashing beacons.
    * 365 day solid state programmable time clock
    * Photocell.

Benefits:

    * Increases roadside safety by warning drivers of hidden or approaching hazards
    * Rugged high-quality signal housing
    * Reliable solid-state flasher control
    * Multiple configurations for mounting framework

EVACUATION SITE (EM-1D)

0.00

Local emergency-management officials may designate sites and locations for placement of the EVACUATION SITE (EM-1D) sign, which directs road users including pedestrians and bicyclists to safe areas.

• EVACUATION SITE sign sizes 18"x24" and 24"x30".
• Aluminum Emergency Management signs do not rust and are guaranteed.
• Signs are made from thick .080 mil aluminum.
• All signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• Add posts, sign base and bolts to your order.
• All 3M reflective signs comply with the latest MUTCD and DOT specifications.

LEAVING TSUNAMI HAZARD ZONE (EM-1C)

0.00

LEAVING TSUNAMI HAZARD ZONE, EM-1C sign may be used to delineate the boundary of defined inundation areas on state highways, local streets and roads.

• LEAVING TSUNAMI HAZARD ZONE sign sizes 18"x24" and 24"x30".
• Aluminum Emergency Management signs do not rust and are guaranteed.
• Signs are made from thick .080 mil aluminum.
• All signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• Add posts, sign base and bolts to your order.
• All 3M reflective signs comply with the latest MUTCD and DOT specifications.

ENTERING TSUNAMI HAZARD ZONE (EM-1C)

0.00

ENTERING TSUNAMI HAZARD ZONE, EM-1C sign may be used to delineate the boundary of defined inundation areas on State highways, local streets and roads.

• ENTERING TSUNAMI HAZARD ZONE sign sizes 18"x24" and 24"x30".
• Aluminum Emergency Management signs do not rust and are guaranteed.
• Signs are made from thick .080 mil aluminum.
• All signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• Add posts, sign base and bolts to your order.
• All 3M reflective signs comply with the latest MUTCD and DOT specifications.

TSUNAMI HAZARD ZONE (EM-1B)

0.00

Local emergency-management officials designate appropriate locations for placement of the TSUNAMI HAZARD ZONE / IN CASE OF EARTHQUAKE GO TO HIGHER GROUND OR INLAND, EM-1B sign. The EM-1B may be posted near the coast in parking lots, parks and beaches.

• TSUNAMI HAZARD ZONE sign sizes 24"x18" and 30"x24".
• Aluminum Emergency Management signs do not rust.
• Signs are made from thick .080 mil aluminum.
• All signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• Add posts, sign base and bolts to your order.
• All 3M reflective signs comply with the latest MUTCD and DOT specifications.

TSUNAMI HAZARD ZONE (EM-1E)

0.00

TSUNAMI HAZARD ZONE EM-1E sign may be placed at appropriate locations within the Tsunami Hazard Zone as necessary to alert road users.

• TSUNAMI HAZARD ZONE sign sizes 18"x18" and 24"x24".
• Aluminum Emergency Management signs do not rust and are guaranteed.
• Signs are made from thick .080 mil aluminum.
• All signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• Add posts, sign base and bolts to your order.
• All 3M reflective signs comply with the latest MUTCD and DOT specifications.

TSUNAMI EVACUATION ROUTE (EM-1A)

0.00

Local emergency-management officials may designate evacuation routes and locations for placement of the TSUNAMI EVACUATION ROUTE EM1-A sign on State highways, and on local streets and roads.

• TSUNAMI EVACUATION ROUTE sign sizes 18"x18" and 24"x24".
• Aluminum Emergency Management signs do not rust and are guaranteed.
• Signs are made from thick .080 mil aluminum.
• All signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• Add posts, sign base and bolts to your order.
• All 3M reflective signs comply with the latest MUTCD and DOT specifications.

Hurricane Evacuation Route (EM-1)

0.00

• Hurricane Evacuation Route sign size 24x24.
• Aluminum Emergency Management signs do not rust and are guaranteed.
• Signs are made from thick .080 mil aluminum.
• All signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• Add posts, sign base and bolts to your order.
• All 3M reflective signs comply with the latest MUTCD and DOT specifications.

Military Green 14x26 Polypropylene Sandbag

0.00

U.S. Barricades Military Green 14" x 26" polypropylene sandbags with tie strings attached is a low cost solution for any and all emergency situations. Our UV treated sandbags are the strongest and most durable sandbags made in the United States.

Polypropylene Sandbags include:

* 14" x 26" polypropylene sandbags with attached tie string
* Double sewn seams
* Dense tight weave to keep sand / product dry
* Hemmed top / folded bottom
* Resists punctures and/or tears
* UV Treated

Tough polypropylene sandbags are perfect for:

* Flood control and protection
* Reinforcing existing dike structures
* Erosion control
* Levee construction
* Providing extra weight for traffic Barricades

Orange 14x26 Polypropylene Sandbag

0.00

U.S. Barricades orange 14" x 26" polypropylene sandbags with tie strings attached is a low cost solution for any and all emergency situations. Our UV treated sandbags are the strongest and most durable sandbags made in the United States.

Polypropylene Sandbags include:

* 14" x 26" polypropylene sandbags with attached tie string
* Double sewn seams
* Dense tight weave to keep sand / product dry
* Hemmed top / folded bottom
* Resists punctures and/or tears
* UV Treated

Tough polypropylene sandbags are perfect for:

* Flood control and protection
* Reinforcing existing dike structures
* Erosion control
* Levee construction
* Providing extra weight for traffic Barricades

Type III Barricade (12ft Molded Plastic)

0.00

The Molded Plastic Type III Barricade is the most durable, lightweight , feature-laden barricade system on the market today.

    * NCHRP-350 certified and MUTCD compliant, Anchor Barricade has earned many FHWA Acceptance (WZ) Letters.
    * Type III Barricade is blow-molded from high density polyethylene (HDPE) plastic, with UV stabilizers.
    * Molded Plastic Barricade is made of three components:
      • Anchor® Base • The Mast Upright • Wave Centerboard
    * Anchor Barricade is available in complete units or as components.
    * For added versatility, hollow extruded uprights are available in 5' or 7' heights. Also, plain extruded center boards are available in 4', 6', 8', 10' and 12' lengths.

Type III Barricade (10ft Molded Plastic)

0.00

The Molded Plastic Type III Barricade is the most durable, lightweight , feature-laden barricade system on the market today.

    * NCHRP-350 certified and MUTCD compliant, Anchor Barricade has earned many FHWA Acceptance (WZ) Letters.
    * Type III Barricade is blow-molded from high density polyethylene (HDPE) plastic, with UV stabilizers.
    * Molded Plastic Barricade is made of three components:
      • Anchor® Base • The Mast Upright • Wave Centerboard
    * Anchor Barricade is available in complete units or as components.
    * For added versatility, hollow extruded uprights are available in 5' or 7' heights. Also, plain extruded center boards are available in 4', 6', 8', 10' and 12' lengths.

Type III Barricade (8ft Molded Plastic)

0.00

Type III Barricade (6ft Molded Plastic)

0.00

Type III Barricade (4ft Molded Plastic)

0.00

Type III Barricade (10ft Plastic Breakaway)

0.00

The plastic type lll break-away barricade is NCHRP 350 approved and is made from 100% recycled plastics (high molecular weight polyethylene) and is fully collapsible. The plastic bases are 25% heavier than the same size wood base and all is pre-drilled for easy set-up and storage. This unit will never rust, splinter or need painting. Break-Away Barricades come in white only, 3M reflective sheeting can be ordered with Engineer Grade, High Intensity or Diamond Grade.

Type III Barricade (8ft Plastic Breakaway)

0.00

Type III Barricade (6ft Plastic Breakaway)

0.00

Type III Barricade (4ft Plastic Breakaway)

0.00

The plastic type lll break-away barricade is NCHRP 350 approved and is made from 100% recycled plastics (high molecular weight polyethylene) and is fully collapsible. The plastic bases are 25% heavier than the same size wood base and all is pre-drilled for easy set-up and storage.

This unit will never rust, splinter or need painting. Break-Away Barricades come in white only, stripes on sheeting are 6" wide. Single sided sheeted boards are produced with right sheeting, double sided sheeted boards are produced with left sheeting on one side and right sheeting on the other side unless otherwise specified.

Solar Matrix Message Board

0.00

Trailer mounted solar matrix message boards offer full graphic and text capability, are one hundred percent NTCIP-compliant and can be easily controlled by any NTCIP-compliant traffic management software. Our durable design, plug and play components, and energy efficient technology provide a sign that requires minimal maintenance and has a low cost to own.

Structure

Overall length: 3759 (148")
Overall width: 1676 mm (66")
Display panel: 1600 mm x 2489 mm (63" x 98")
Panel construction: Aluminum
Traveling height: 2845 mm (112")
Operating height: 4927 mm (194")
Weight: 725.5 kg (1600 lb.)
Coupler: 2" coupler or 3" pintle eye
Axle/suspension: 907 kg (2000 lb.)

Display

Full matrix display (63" x 98")
3 lines of up to 8 characters per line
Display (228 mm x 320 mm - 9" x 12.6")
4 LEDs per pixel in optical lens with a 30° wide viewing angle
A character is based on a 5 x 7 pixel of 343 mm (13.5")
Display sign rotates 360 degrees
Easy access and walk-way for maintenance
Plug & play display modules
LED output adjusts automatically to ambient light conditions
100 brightness levels (1%-100% in increments of 1%)
On-site interface for self-error detection system and test pattern

Features

Changeable messages (255 Default) (*1-999)
Permanent messages (258 Default) (*1-999)
Volatile messages (64 Default) (*1-999)
Changeable graphic pictograph (255)
Permanent graphic pictograph (89)
Permanent Font sizes (15)
Custom Changeable Font sizes (*5)
Auto font
Per character font sizing
Per character & line flashing
Admin & User level password
Auto brightness (photocell)
Manual 0%-100% brightness levels (increments of 1%)
Scheduling
Scrolling
Special dynamic data feature displays motorist speed, triggers messages, actual temperature, time & date & live countdown.
NTCIP compatibility (see detailed spec)
Easy integration to Software management
Already Supported by: Delcan, IBI, ect…

Programming

On-site using unit keyboard
Easy three step programming category
High-speed remote programming from your PC with cellular option
Ethernet port (10/100)
2x additional RS-232 ports

WARRANTY

1-year warranty on complete trailer
2-year warranty on electronics
6-month manufacturer’s warranty on batteries
Limited warranty on solar panels varies from one manufacturer to another

TECH SUPPORT

24/7 technical support

Lowest Price in the United States

Solar Matrix Message Board (Full Size)

0.00

Solar powered full size matrix message signs offer full graphic capability, and are one hundred percent NTCIP-compliant and can be easily controlled by any NTCIP-compliant traffic management software. Our reliable design, plug and play components, and energy efficient technology provide a sign that requires minimal maintenance and has a low cost to own.

Structure

Overall length: 4470 mm (176")
Overall width: 2184 mm (86")
Display panel: 2083 mm x 3378 mm (82" x 133")
Panel construction: Aluminum
Traveling height: 2946 mm (116")
Operating height: 4572 (180")
Weight: 1150kg ( 2535 lb).
Coupler: 3" pintle eye
Axle/suspension: 1588kg (3500 lb.)

Display

Full matrix (30 x 48 pixels)
Matrix display 80" high x 142" wide
Up to 3 lines of 8 characters per line
4 LEDs per pixel in optical lens with 30° (standard) wide viewing angle
18" character default font
Display sign rotates 360 degrees
Easy access and walk-way for maintenance
Plug & play display modules
On-site interface for self-error detection system and test pattern

Features

Changeable messages (255 Default) (*1-999)
Permanent messages (258 Default) (*1-999)
Volatile messages (64 Default) (*1-999)
Changeable graphic pictograph (255)
Permanent graphic pictograph (89)
Permanent Font sizes (15)
Custom Changeable Font sizes (*5)
Auto font
Per character font sizing
Per character & line flashing
Admin & User level password
Auto brightness (photocell)
Manual 0%-100% brightness levels (increments of 1%)
Scheduling
Scrolling
Special dynamic data feature trigger messages, displays motorist speed, actual
temperature, time & date & live countdown
NTCIP compatibility (see detailed specs)
Easy integration to Software management
Already Supported by: Delcan, IBI, etc.

Solar power supply

Tilt and Rotate solar panel rack
Various configurations of solar panels and batteries available
Solar regulator with battery surcharge protection

Programming

On-site using unit keyboard or laptop (RS-232 connection)
Ethernet cross-over connections
Easy three-step programming category
High-speed remote programming from your PC with cellular option
Ethernet port 10/100
2x additional RS-232 ports

Options

3G modem, can support fiber-optic, radio communication
Free access to our remote fleet management software Jamlogic2 (1._PDF)
Radar http://www.houston-radar.com/gpage4.html
Data logger (requires radar)
GPS tracking
Easy graphic LCD touchscreen
Intelligent display sign with pixel detection
Battery charger
Adjustable pintle hitch
2" coupler or 2 5/16" coupler
Hydraulic or Electric brakes
Traffic camera
Safety lock: Wheel, battery boxes, etc.
Spare tire
Tongue wheel jack
Level (to stabilize sign)
LED output adjusts automatically to ambient light conditions
100 brightness levels (1%-100% in increments of 1%)

WARRANTY

1-year warranty on complete trailer
2-year warranty on electronics
6-month manufacturer’s warranty on batteries
Limited warranty on solar panels varies from one manufacturer to another

TECH SUPPORT

24/7 technical support

Connecticut ADA Handicapped (HANDICAPPED PARKING PERMIT REQUIRED)

25.75

• HANDICAPPED PARKING sign size - 12"x 24".
• Traffic Signs do not rust and are guaranteed!
• All 3M reflective signs comply with latest MUTCD and D.O.T. specifications.
• Signs are made from thick .080 mil aluminum.
• Signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• Add posts, sign base and bolts to your order.

California ADA Handicapped (PARKING ONLY MINIMUM FINE $250)

25.75

• PARKING ONLY MINIMUM FINE sign size - 12"x 24".
• Traffic Signs do not rust and are guaranteed!
• All 3M reflective signs comply with latest MUTCD and D.O.T. specifications.
• Signs are made from thick .080 mil aluminum.
• Signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• Add posts, sign base and bolts to your order.

California ADA Handicapped (PARKING ONLY)

0.00

• Parking Only sign sizes - 12"x 18" and 18"x 24".
• Traffic Signs do not rust and are guaranteed!
• All 3M reflective signs comply with latest MUTCD and D.O.T. specifications.
• Signs are made from thick .080 mil aluminum.
• Signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• Add posts, sign base and bolts to your order.

Solar Parking Light

0.00

Solar parking and street lighting applications are becoming popular options for reducing energy costs and saving money. U.S. Barricades is a leader in solar powered lighting and designs custom solar parking and street lighting solutions for the United States and Canada. The benefits of these solutions are endless, you will see instantaneous savings from your current electrical providers. Our lighting systems are brighter and 80% to 95% more energy efficient than existing non-solar lighting systems. All solar powered lights and panels are made in the United States.

This self-powered light utilizes solar power with a 12v storage battery, so it requires no grid power. Simply mount the unit onto a 2-3/8" OD post in any sunny location, at a recommended height of 15 feet. This solar powered light can be used to light a small area or over a sign.

Specifications:

# Head: 22" L x 8.25" W x 0.7" thick
# Housing for battery & control unit: 8.66" L x 4.33" W x 5-6" Tall
# Sleeve: 3.9" L, 2-7/8" ID, 2-7/8" OD

$1,275.00 each

Airport Obstruction Light (dual head)

0.00

U.S. Barricades L-810 dual head obstruction lights are used on buildings, antennas, towers, cranes, and any other kind of obstacle which occupies airspace. Each fixture includes a glass Fresnel globe which is colored red for most applications. The fixtures are either a single or a double lamp housing and made with 3/4" or 1" internally threaded housing. A side-mounted option is also available. These obstruction lights operate on a 120V or 230V circuit.

Electronic Controls:
Our double obstruction lights can be outfitted with electronic controls to enhance the operation, automation and reduce the maintenance cycle of the fixture. Common configurations include photocells, flashers, transfer relays and alarms. Note: flashing obstruction lights are not FAA approved. Other options may be available upon request.

Features:
• Direct installation into existing voltage power circuit.
• Direct mounting to conduit, bottom or side mounting options available.
• Photocell option for automatic activation at night.
• Optional grounding wire available.
• Flashers used in fixtures are set at 45 FPM, 50% duty cycle. These fixtures are not FAA certified when flashing.
• Standard configurations come with 3/4" threaded fittings. 1" threaded and side mount configurations available on request.
• FAA style photocells with a 45 second time delay prevents activation and de-activation from momentary light condition.

Airport Obstruction Light (single head)

0.00

U.S. Barricades L-810 obstruction lights are used on buildings, antennas, towers, cranes, and any other kind of obstacle which occupies airspace. Each fixture includes a glass Fresnel globe which is colored red for most applications. The fixtures are either a single or a double lamp housing and made with 3/4" or 1" internally threaded housing. A side-mounted option is also available. These obstruction lights operate on a 120V or 230V circuit.

Electronic Controls:
Single and double obstruction lights can be outfitted with electronic controls to enhance the operation, automation and reduce the maintenance cycle of the fixture. Common configurations include photocells, flashers, transfer relays and alarms. Note: flashing obstruction lights are not FAA approved. Other options and custom combinations may be available upon request.

Features:
• Direct installation into existing voltage power circuit.
• Direct mounting to conduit, bottom or side mounting options available.
• Photocell option for automatic activation at night.
• Optional grounding wire available.
• Flashers used in fixtures are set at 45 FPM, 50% duty cycle. These fixtures are not FAA certified when flashing.
• Standard configurations come with 3/4" threaded fittings. 1" threaded and side mount configurations available on request.
• FAA style photocells with a 45 second time delay prevents activation and de-activation from momentary light condition.

Traffic Signal UPS - Uninterruptable Power Supply

0.00

Why back up the power in your intersections? According to federal DOT report during emergency situations that include heat waves, storms, fires, floods, earthquakes, accidents, power outages and brown outs that can wreak havoc at intersections. Over 29,000 automobile accidents occurred when traffic control systems failed, resulting in an estimated cost of $150 billion to the U.S. economy.

Common problems at intersections include:

    * Snarled traffic and congestion
    * Heightened risk of vehicular and pedestrian accidents
    * Escalating 911 calls
    * Gridlock that traps emergency vehicles
    * Increased policing costs
    * Injuries, fatalities and lawsuits.

Call U.S. Barricades at 203-662-0833 for more information about traffic signal emergency power systems.

Portable Traffic Signal PTS-1000

0.00

Our new generation traffic light, the PTS-1000 is state of the art portable traffic signal with the latest features bringing safety and versatility to a new level.

Overall Dimensions:

    * Traveling length: 1041mm (41”)
    * Overall length: 1524mm (60”)
    * Traveling Width: 660mm (26”)
    * Overall Width: 1067mm (42”)
    * Overall Height: 3429mm (135”)
    * Travelling Height: 2057mm (81”)

Display:

    * 12” LED Lights
      Optional 8” head

Programming:

    * On site or remote programming
          o Onsite handheld capable of controlling multiple units.
    * Adjustable sequences of operation of the traffic signal unit(s)
    * Accommodates variations of additional devices, extra signal units and/or certain prioritized traffic movements depending on the special needs of the particular installation site (intersection)

Normal traffic control pattern types:

    * Access (one signal head)
    * Shuttle
    * Two-way
    * T-junction
    * Crossroads
    * Variable Crossroads
    * System can be also programmed for four (4) Actuated operation types:
          o Vehicle Detector
          o Emergency Pre-emption
          o Manual operation by on-site operator
          o Pedestrian activation
    * Storage of up to twenty (20) fixed-time phase plans (complete sequence of signal indications)
    * Built-in fail-safe barriers eliminate creation of conflicting traffic movements
    * Programmable sequences for both
          o start-up
          o communication loss
    * Complete on-site configuration and real-time program monitoring - operator can view the signal display on screen while it is runnin
    * Pre-determined time-split schedules from central controller downloadable by on-site operator
    * Monitoring
          o to detect signal display conflicts or loss of power
          o to verify the proper operation of the controller
    * Choice of alarm indications
          o Steady Circular Red
          o Flashing Red
          o Flashing Yellow

Feature:

    * System comes standard with one 12" LED signals heads on each trolley
    * Synchronization is maintained through
    * radio communications
    * Primary and secondary trailers may be positioned
    * up to 1 mile apart

Options:

    * Vehicle detection
          o Microwave
          o Camera
          o Loop
    * Manual control
          o Hardwire manual control
          o Remote Pilot car Control
    * GPS
    * Pedestrian walk way
          o Schedule
          o Manual button
          o Countdown
    * Red lamp countdown
    * Pre-emption
    * Adaptable to advance warning systems
    * Alarm system defect via SMS
    * Remote communication
    * 12” led lamps ITE
    * 8” led Lamps ITE
    * Lamp border (black or yellow)
    * Charger 55amp
    * Direct current (IQ4)
    * Turn arrow lamp indicator
    * Remote programming
    * Directional antenna
    * Red light
          o Strobe indicator

Trolley Material:

    * Steel Battery/control box
    * 51 mm x 51 mm x 3.175 mm (2’’ X 2’’ X 1/8”) Aluminum tube mast
    * Steel stabilizing arms

Batteries:

    * 6-volt 220 amp/hour deep-cycle batteries wired to provide a 12-volt system
      Optional: Various batteries and configurations available
      10 gauge batteries cables, Batteries not included.

Lift Mechanism:

    * 90 lbs Gas Shocks

Tires:

    * 10” Rubber tires

Trolley Paint:

    * State-of-the-art powder coating system
      Highway safety orange » is the standard color used
      Optional: Other colors available to comply with different regulations
    * Powder coating quality
          o Certified UV protect paint
          o Impact resistant
          o Humidity Resistant
          o Salt spray resistant

Maintenance:

    * Battery fluids should be checked and topped off at least once per month
    * Visual inspection of mast cable

Warranty:

    * 1-year warranty on complete trolley
    * 6-month manufacturer’s
      warranty on batteries

TECH SUPPORT:

    * 24/7 technical support

$16,000.00 two units

Clearance Bar (7 Feet)

0.00

The Clearance I-Bar is an all aluminum 7" x 7' extruded aluminum system. The I-Bar can be cut to a desired length, painted a desired color (safety yellow standard) and display your required message in high performance reflective vinyl (black reflective vinyl standard). This is a oversize item, Clearance I-Bar must ship ground freight. Made in the United States.

• Dimensions:    7" H x 84" W x 4" D
• Weight:    35 lbs.
• Faces:     Single Face
• Vinyl Color:    Yellow, Black Reflective Text.
• Made in the United States

Clearance Bar (6 Feet)

0.00

The Clearance I-Bar is an all aluminum 7" x 6' extruded aluminum system. The I-Bar can be cut to a desired length, painted a desired color (safety yellow standard) and display your required message in high performance reflective vinyl (black reflective vinyl standard). This is a oversize item, Clearance I-Bar must ship ground freight. Made in the United States.

• Dimensions:    7" H x 72" W x 4" D
• Weight:    30 lbs.
• Faces:     Single Face
• Vinyl Color:    Yellow, Black Reflective Text.
• Made in the United States

Clearance Bar (5 Feet)

0.00

The Clearance I-Bar is an all aluminum 7" x 5' extruded aluminum system. The I-Bar can be cut to a desired length, painted a desired color (safety yellow standard) and display your required message in high performance reflective vinyl (black reflective vinyl standard). This is a oversize item, Clearance I-Bar must ship by trucking company.

• Dimensions:    7" H x 60" W x 4" D
• Weight:    25 lbs.
• Faces:     Single Face
• Vinyl Color:    Yellow, Black Reflective Text.
• Made in the United States

Clearance Bar (4 Feet)

0.00

The Clearance I-Bar is an all aluminum 7" x 4' extruded aluminum system. The I-Bar can be cut to a desired length, painted a desired color (safety yellow standard) and display your required message in high performance reflective vinyl (black reflective vinyl standard)

• Dimensions:    7" H x 48" W x 4" D
• Weight:    25 lbs.
• Faces:     Single Face
• Vinyl Color:    Yellow, Black Reflective Text.

Clearance Bar (3 Feet)

0.00

The Clearance I-Bar is an all aluminum 7" x 3' extruded aluminum system. The I-Bar can be cut to a desired length, painted a desired color (safety yellow standard) and display your required message in high performance reflective vinyl (black reflective vinyl standard)

Dimensions:    7" H x 36" W x 4" D
Weight:    14 lbs.
Faces:     Single Face
Vinyl Color:    Yellow, Black Reflective Text.

Speed Bumps

0.00

Speed Bumps from U.S. Barricades is a cost effective way to control traffic and reduce vehicle speeds to under 10 mph. Our high-visibility speed bumps effectively slow traffic without vehicle or tire damage. Increases pedestrian safety, install speed bumps in parking lots, parking garages, construction work zones, schools, universities, hospitals and airports.

Made from 100% recycled tire rubber, our speed bumps are the durable, long-lasting solution to asphalt or concrete speed bump. Installs easily with lag bolts, simply drill a hole with a masonry bit and penetrate the asphalt or concrete surface below, removable for road surface maintenance. Made in the United States.

• 10"W X 24"L X 2 1/8" Section, Minimum 3 sections per Speed Bump
• 3 Sections - Length for 3 sections 72"
• Modular design for any desired length
• No need for end caps, ours are built-in
• Embedded reflective material increases visibility and safety, day or night.
• Resistant to extreme temperature variations, UV light, oils, moisture and damage.
• All-weather durability: will not warp, chip, crack, crumble or corrode.
• Easy to remove and relocate, for temporary or permanent installation.
• Flexible: conforms to road curvature and any asphalt or concrete surface.
• Easy, one-person installation with basic tools.
• Made in the USA from durable recycled tire rubber.

Parking Lot Wheel Stops

0.00

U.S. Barricades parking lot wheel stop or parking blocks will ensure vehicles stop at the proper location when parking, preventing damage to buildings, sidewalks, curbs and delicate landscape. Inside, they function as bumper cushions and protection for motorized carts, forklift trucks and vehicles operating in factories and warehouses. Ideal for retail commercial, business, parking lots, parking garages and municipalities.

Our parking stops are 100% post-consumer recycled rubber wheel stops are a durable, reliable, long-lasting alternative to traditional concrete stops. U.S. Barricades car stops cost less to install and will not require heavy lift equipment, one person can install this unit in less then five minutes. Studies have shown that over a 10-year period, concrete wheel stops could cost six times more than recycled rubber models due to cracking/maintenance issues. Our parking lot wheel stop comes with a five year warranty, the competition only one year, we stand behind our product that is made in the United States.

• 72 x 6 x 4” polygon
• 8 Large Reflective Plastic Stripes
• Reflective Stripe Colors - Yellow, White, Handicap Blue and Solid Black-no stripes
• Light weight - 38 Pounds
• 5 mooring holes for lag bolts, lag shield & washer or 14" rebar spikes
• Temporary or permanent installation.
• Flexible: conforms to any asphalt or concrete surface.
• Less damaging to vehicles upon impact.
• Resistant to extreme temperature variations, UV light, oils, moisture and damage.
• All-weather easy maintenance: will not rust, chip, crack, crumble, corrode or need repainting.
• Easy to install, easy to move by one person.
• Made In America with American Recycled Tire Rubber (100%) Post consumer
• 5 Year Warranty

Type I Barricade (12x36 panel) steel and wood

0.00

U.S. Barricades manufacturers finest NCHRP-350 approved Type I steel leg and plywood panel barricade made in the United States. All A-Frame barricades are made with 3M Engineering Grade, High Intensity or Diamond grade sheeting to conform with all local, state and federal regulations. Barricade legs are available either galvanized or enamel painted for maximum corrosion protection.

• Top Panel 12x36"
• Bottom Panel 6x36"
• 14 Gauge steel legs painted white or galvanized
• 1/2" thick special exterior grade plywood board.
• Hinge holes are enlarged to accommodate 1/2" barricade light mounting bolts, two sides.
• All barricade components are completely interchangeable.
• Tested and certified to meet the crashworthy requirements of NCHRP-350.
• Made in the United States.

Lowest Price in the United States!

Minimum order of 10 units, call U.S. Barricades at 203-883-8660 for large orders and shipping discounts.

Type I Barricade (8x32 inch) Steel and Wood

0.00

U.S. Barricades manufacturers finest NCHRP-350 approved Type I steel leg and plywood panel barricade made in the United States. All A-Frame barricades are made with 3M Engineering Grade, High Intensity or Diamond grade sheeting to conform with all local, state and federal regulations. Barricade legs are available either galvanized or enamel painted for maximum corrosion protection.

• Top Panel 8x32"
• Bottom Panel 6x32"
• 14 Gauge steel legs painted white or galvanized
• 1/2" thick special exterior grade plywood board.
• Hinge holes are enlarged to accommodate 1/2" barricade light mounting bolts, two sides.
• All barricade components are completely interchangeable.
• Tested and certified to meet the crashworthy requirements of NCHRP-350.
• Made in the United States

Lowest Price in the United States!

Minimum order of 10 units, call U.S. Barricades at 203-883-8660 for large orders and shipping discounts.

Type I Barricade (12x24 inch) Steel and Wood

0.00

U.S. Barricades manufacturers finest NCHRP-350 approved Type I steel leg and plywood panel barricade made in the United States. All A-Frame barricades are made with 3M Engineering Grade, High Intensity or Diamond grade sheeting to conform with all local, state and federal regulations. Barricade legs are available either galvanized or enamel painted for maximum corrosion protection.

• Top Panel 12x24"
• Bottom Panel 6x24"
• 14 Gauge steel legs painted white or galvanized
• 1/2" thick special exterior grade plywood board.
• Hinge holes are enlarged to accommodate 1/2" barricade light mounting bolts, two sides.
• All barricade components are completely interchangeable.
• Tested and certified to meet the crashworthy requirements of NCHRP-350.
• Made in the United States

Lowest Price in the United States!

Minimum order of 10 units, call U.S. Barricades at 203-883-8660 for large orders and shipping discounts.

A-Frame Parade Barricade Leg

25.50

Replacement Parade barricade legs can be ordered with one (Type I) or two (Type II) barricade panels with reflective sheeting available on one or both sides. Barricade panels can be ordered with 3M Engineer Grade, High Intensity or Diamond Grade reflective sheeting and in lengths of 4, 6, 8 &10 feet. Engineered to meet all ADA, NCHRP 350 & MUTCD standards.

NCHRP-350 Certified.

Meets all MUTCD and ADA standards.

Impact-resistant polypropylene with special additive is weather resistant in extreme conditions.

Made of 30% recycled material.

Accommodates up to two 2 plastic rails, sold separately.

For complete set, order two legs.

Barricade can be Type I (single rail) or Type II (2 rails).

A-Frame legs can angle for parade barricade application.

Lightweight, easy to handle.

Reflective sheeting factory applied for maximum adhesion.

Recessed panels protect reflective sheeting.

Made in the United States

3 Year Warranty

Legs stack for easy storage

$25.50 each

A-Frame Parade Barricade (Diamond Grade)

0.00

U.S. Barricades innovative Parade Barricade has the durability and the versatility you demand from an “A-Frame” barricade! Made of durable high density polyethylene, the O-Frame is U.V. stabilized and designed to take severe abuse in any weather conditions. Our plastic parade barricade is an easy and convenient solution for any city or town setting up for special events, parade routes, utility service or traffic control that needs to be cordoned off.

The O-Frame can be ordered with one (Type I) or two (Type II) barricade panels with reflective sheeting available on one or both sides. Barricade panels can be ordered with 3M Engineer Grade, High Intensity or Diamond Grade reflective sheeting and in lengths of 4, 6, 8 &10 feet. Engineered to meet all ADA, NCHRP 350 & MUTCD standards.

Specifications:

• Impact-resistant and UV-stable thermoplastic for superior durability
• The only barricades with a 3-year pro-rated warranty!
• Engineered to conform to ADA, NCHRP 350 & MUTCD standards
• Panels have smooth surfaces to allow easy application of reflective tape
• Flexibility to use 1 x 8-inch or 2 x 8-inch barricade panels
• Panels available in 4, 6, 8, 10 and 12-foot standard lengths
• Rigid injection molded legs will not sag in the heat of the sun
• Barricade legs with molded-in holes for attachment of lights
• Barricade legs stack for easy transit & efficient storage
• Panels & legs available for purchase separately or together
• Choose from Engineer, High Intensity or Prismatic sheeting
• Panels can be factory-sheeted on one or both sides
• 3-Year Warranty
• Made in the United States

Innovative O-Frame Leg:

• Unique four board design
• Center slots have pinch points to lock in the boards
• Molded nubbins for stacking also stabilize barricade light
• Solid injection molded leg - stronger than blow molding
• Versatile - Accommodates plastic or wood panels
• 1 x 8” plastic panels
• 2 x 8” plastic panels
• 2 x 8” nominal lumber
• Flexibility to convert to a Type I or Type II using the same components.
• Flexibility to convert to ADA Compliant Type II using the same components.

ADA compliant barricade Legs stack for easy storage MUTCD compliant barricade

A-Frame Parade Barricade (Engineer Grade)

0.00

ADA compliant barricade Legs stack for easy storage MUTCD compliant barricade

Type II Barricade (12x24 panel) Plastic

0.00

U.S. Barricades are the finest NCHRP-350 approved Type II plastic barricade made in America. Latest technology in stress and impact absorption with exclusive waffle-board design on the back make our barricade the strongest most reliable in the industry.

All Type II barricades are made with 3M Engineering Grade, High Intensity or Diamond grade sheeting to conform with all local, state and federal regulations.

• Width 24"
• Height 42"
• Weight 14 lbs.
• Thickness 2 1/4"
• Top panel 12"x 24", bottom panel 8"x 24"
• Plastic high density polyethylene.
• Unique recessed molded light mount brackets sized for standard bolts.
• Protective anti-skid/wear tabs on bottom of legs.
• Non-shifting stacking lugs.
• Capable of internal sand ballasting, up to 30 pounds.
• Barricade lays flat upon impact.
• Holds many sizes of signs.
• Resistant to extreme temperatures.
• Convenient molded carry-handle.
• Made in the United States.

Minimum order is 10 units, call U.S. Barricades at 203-883-86603 for larger orders and shipping discounts.

Type II Barricade (8x24 panel) Plastic

0.00

U.S. Barricades are the finest NCHRP-350 approved Type II plastic barricade made in America. Latest technology in stress and impact absorption with exclusive waffle-board design on the back make our barricade the strongest most reliable in the industry.

All Type II barricades are made with 3M Engineering Grade, High Intensity or Diamond grade sheeting to conform with all local, state and federal regulations.

• Width 24"
• Height 42"
• Weight 14 lbs.
• Thickness 2 1/4"
• Top panel 8"x 24", bottom panel 8"x 24"
• Plastic high density polyethylene.
• Unique recessed molded light mount brackets sized for standard bolts.
• Protective anti-skid/wear tabs on bottom of legs.
• Non-shifting stacking lugs.
• Capable of internal sand ballasting, up to 30 pounds.
• Barricade lays flat upon impact.
• Holds many sizes of signs.
• Resistant to extreme temperatures.
• Convenient molded carry-handle.
• Made in the United States.

Minimum order is 10 units, call U.S. Barricades at 203-883-8660 for larger orders and shipping discounts.

Railroad Chock (Type A-1)

0.00

Single chock with flag for flush rail is suitable for use with flush rail systems for U.S. and Canada, The ergonomic high-visibility wheel chock extends the handle to 48" for greater visibility. The worker can stay a safe distance from the car body and wheel when placing or removing the chock. The freight car stop features steel-spurred cast steel chock in this single chock style. The OSHA mandated wheel stop fits all T-rail sizes and wheel diameters from 28" to 42”, flush rail.

Railroad Chock (Type A)

0.00

Single chock with flag for exposed rail is suitable for use with exposed rail systems for U.S and Canada. The ergonomic high-visibility wheel chock extends the handle to 48" for greater visibility. The worker can stay a safe distance from the car body and wheel when placing or removing the chock. The freight car stop features steel-spurred cast steel chock in this single chock style. The OSHA mandated wheel stop fits all T-rail sizes and wheel diameters from 28" to 42”

Red Switching Light

317.50

U.S. Barricades railroad switching light is the top selling red flashing light in the United States. Tough and durable, our railroad light is made with UV stabilized, Hi-Impact polypropylene for long life in the harshest environment. The upper case design eliminates the need for a rubber neck ring, this design will keep water and dust out and guarantee our switching light will work under any weather conditions.

Lightweight High Intensity Lights.
Operates on 2 or 4 D-Cell Batteries.
Polycarbonate lenses and High Impact Polypropylene housing.
Discounts for Federal operations, State DOTs and Municipalities.
Made in the United States.

Solid State Circuitry:

Moisture proof circuit using the latest state of the art electronic components Reverse polarity protected Available in flashing or steady burn 6 or 12 volt with or without photo electric switch Standard flash rate in 65+/- 10 FPM and on time is a minimum of 10% of the flash cycle Special purpose circuits with various flash rates and on times are available upon request.

Lenses:

7" Polycarbonate Fresnel design with 5/8"Reflector ring

Housing:

Custom molded case identification and /or hot stamp imprinting available upon request.

Packaging:

Lights are packaged ten per carton. In addition, each carton contains one switch pin, ten bolts and one wrench. The weight per carton is 24 pounds.

Hardware:

The standard tamper proof mounting bolt is 1/2"x3-3-/4" with a pyramid shaped head. Half moon and 5 sided button hex head bolts in various lengths and bolt protectors are available upon request.

3V or 6V LED Model:

This light operates on one battery for over a year in steady burn model. 3 way switch changes the light from flashing to steady burn to off. LED saves battery life and shine brighter than typical barricade lights.

Model 2006-3LWR is a 3 volt system that can operate on two to four D-Cell batteries. It will project an adequate signal for over 60 days on two D-Cell Alkaline Batteries and over 120 days with four D-Cell Alkaline Batteries.

Model 2006-6LWR is a 6 volt system that will project an adequate signal for up to sixty days on 4 D-Cell Alkaline Batteries.

$31.75. each, 10 lights per case, $317.50 per case.

Minimum order 10 lights - one case

Blue Flag Strobe Light 360

81.75

The very latest technology has been engineered into our Blue Flag Strobe Light 360. These warning lights employ the latest features for reliability and long life. They combine the finest solid state circuitry, xenon gas bulbs and optically designed polycarbonate lens to provide maximum light output at minimum power consumption.

Blue Flag Strobe Light 360 is a single flash 3.8 Joules units drawing .48 amps, this model has optional handle and magnetic base. Various colored domes are available. Single Flash- Dome diameter 3.5", Dome height 3.75"(unit is pictured with optional magnetic mount and handle)

$81.75 each

Blue Flag Railroad Light (LED)

317.50

Blue Railroad Light

The Model 400 is the top selling blue flag light in the United States. Tough and durable, our railroad light is made with UV stabilized, Hi-Impact polypropylene for long life in the harshest environment The upper case design eliminates the need for a rubber neck ring, this design will keep water and dust out and guarantee the Model 400 will work under any weather conditions.

Solid State Circuitry:

Lenses:

7" Polycarbonate Fresnel design with 5/8"Reflector ring

Housing:

Custom molded case identification and /or hot stamp imprinting available upon request.

Packaging:

Lights are packaged ten per carton. In addition, each carton contains one switch pin, ten bolts and one wrench. The weight per carton is 24 pounds.

Hardware:

The standard tamper proof mounting bolt is 1/2"x3-3-/4" with a pyramid shaped head. Half moon and 5 sided button hex head bolts in various lengths and bolt protectors are available upon request.

3V LED Model:

Warranty:

Minimum order 10 lights - one case

Blue Flag Railroad Light (incandescent)

280.00

Blue Railroad Light

Solid State Circuitry:

Lenses:

7" Polycarbonate Fresnel design with 5/8"Reflector ring

Housing:

Custom molded case identification and /or hot stamp imprinting available upon request.

Packaging:

Lights are packaged ten per carton. In addition, each carton contains one switch pin, ten bolts and one wrench. The weight per carton is 24 pounds.

Hardware:

The standard tamper proof mounting bolt is 1/2"x3-3-/4" with a pyramid shaped head. Half moon and 5 sided button hex head bolts in various lengths and bolt protectors are available upon request.

LED:

LED is an option, but does cost extra. LED lights shine brighter, and the flashing models use 50% less battery life than a regular light, a steady burn uses 25% less.

3V LED Model:

Warranty:

Minimum order 10 lights - one case

Solar Powered PEDESTRIAN CROSSING SYMBOL (W11-2) 30x30 High Intensity HIP

0.00

• Solar powered traffic signs can be made in 30x30", 36x36" and 48x48"
• Reflective sheeting is made by 3M High Intensity HIP.

• Battery power, Nickel Metal Hydride (NiHM)- 14,000mAh, lifespan over 5 years with

24/7 operation.

• LED Life expectancy over 200,000 hours

• Installs onto any new or existing sign post or light pole for easy installation.

• High intensity LED's command attention day and night, can be seen for over two miles.

• Can be programmed to operate continuously (24/7) or on solar time clocks.

• Automatically adjusts light output for maximum visibility and battery efficiency.

• Heighten driver awareness, increased visibility at high incident intersections, keeping

drivers and pedestrians safe.

• 53% Reduction of intersection blow-through, keeping drivers alert.

• Multiple signs can be synchronized.

• All solar powered signs are MUTCD and state DOT compliant.

• All signs, parts and hardware are made in the United States.

• One full year warranty on all material and hardware.

Smart Activation Options:
24/7 continuous

Push-buttons and/or motion (vehicle) detectors.

Time clock activation (Windows based software programmable)

Can be integrated into an ITS (Intelligent Transportation System)

Wireless control activation.
Vehicle detection activation.

Applications:
New stop sign locations.
High incident intersections.
Rural roads.

For more information please call 203-662-0833

Temporary Sign Stand

109.00

U.S. Barricades temporary traffic sign stand is the cost effective solution for emergency or temporary traffic control situations. Compact and portable, our system is easy to set up and will accept signs up to 48" x 48". Easy to disassemble and store, just unlock steel locking pin from post and remove from base. All base units have two recessed handles for easy transport and are stackable for easy storage.

Made with recycled products, our 40 lb. base units have a smaller footprint then barrels, no additional ballast required makes our temporary traffic sign stand the most stable and durable in the industry. Made in the United States.

• Temporary Sign Stand includes 6' long pre-drilled square post, rubber base, steel base plate, and steel locking pin.
• Post is pre-drilled and accommodates most common sign hole patterns.
• Sign stand is NCHRP-350 approved, with up to a 48 x 48'' .080 aluminum sign.
• Rubber Basewith anti-skid foot pads helps keep the stand firmly on the road surface.
• Easy assembly, insert post into base and secure it with the steel locking pin.
• Ideal for multiple sign configurations.
• No Additional Ballast Required
• Withstands Multiple Impacts
• Smaller Footprint Than Barrels
• Environmentally Friendly Constructed Of Recycled Rubber Tires & Polymer Binders
• This stand has been tested to meet the crashworthy requirements of NCHRP-350.
• Made in the United States.

$109.00 each

Temporary Traffic Signal PTS-308

0.00

U.S. Barricades portable traffic signal is the best solution for temporary or emergency traffic control situations. The PTS-308 is state-of-the-art, battery operated fully programmable portable traffic systems with standard 8 inch 200 mm L.E.D. signal display. The PTS-308 portable traffic signal come with two units, main signal has the control unit that is fully programmable and will communicate with the secondary unit. Up to 10 PTS-308 portable traffic signals can communicate with the main signal, we also have PTS-312 with a 12 inch lens for grater visability.

Overall Dimensions:

    * Weight N/A
    * Traveling Length: 1041mm (41")
    * Overall Length: 1524mm (60")
    * Traveling Width: 660mm (26")
    * Overall Width: 1067mm (42")
    * Overall Height: 3429mm (135")
    * Travelling Height: 2057mm (81")

Display:

    * 8" LED Lights

Programming:

    * 3 traffic flow settings (light, moderate, and heavy)
    * Automatic mode: User enters the distance between the signal heads, the approximate number of vehicles flowing through the zone, and the posted speed limit; the controller then automatically calculates the timing of the lights
    * 18 pre-defined settings: offers factory preset timings
    * 12 user-defined settings: allows users to adjust timing to meet their specific needs
    * Time-split scheduling: allows user to program the system to have several timing schedules at different times of day, thus taking into account differences in traffic flow at the different times of the day
    * Software allows user to download a status log from the controller to a laptop.

Options:

    * Countdown display
    * Battery charger
    * AC connection
    * Directional antennas for distances over 1 mile (1.6km)

Trolley Material:

    * Steel battery/control box
    * Aluminum tube mast 51 mm x 51 mm x 3.175 mm (2" X 2" X 1/8")
    * Steel stabilizing arms

Batteries:

    * 6-volt 220 amp/hour deep-cycle batteries wired to provide a 12-volt system
          o Optional: Various batteries and configurations available
    * 10 gauge battery cables

Lift Mechanism:

    * 90 lb Gas Shocks

Tires:

    * 10" Rubber tires

Paint:

    * State-of-the-art powder coating system
    * Highway safety orange » is the standard color used
          o Optional: Other colors available to comply with different regulations
    * Powder coating quality
          o Certified UV protect paint
          o Impact resistant
          o Humidity resistant
          o Salt spray resistant

Maintenance:

    * Battery fluids should be checked and topped off at least once a month
    * Visual inspection of mast cable

Warranty:

    * 1-year warranty on complete trolley
    * 6-month manufacturer’s warranty on batteries

Tech Support:

    * 24/7 technical support

$13,000.00 (two units)

Portable Traffic Signal PTS-312 (12 inch Lens)

0.00

U.S. Barricades portable traffic signal, PTS-312 is state-of-the-art, battery operated fully programmable portable traffic systems with 12 inch L.E.D. signal display. The PTS-312 portable traffic signals come with two units, main signal has the control unit that is fully programmable and will communicate with the secondary unit. Up to ten PTS-312 portable traffic signal can communicate with the main signal.

Overall Dimensions:

    * Weight N/A
    * Traveling Length: 1041mm (41")
    * Overall Length: 1524mm (60")
    * Traveling Width: 660mm (26")
    * Overall Width: 1067mm (42")
    * Overall Height: 3429mm (135")
    * Travelling Height: 2057mm (81")

Display:

    * 12" LED Lights

Programming:

    * 3 traffic flow settings (light, moderate, and heavy)
    * Automatic mode: User enters the distance between the signal heads, the approximate number of vehicles flowing through the zone, and the posted speed limit; the controller then automatically calculates the timing of the lights
    * 18 pre-defined settings: offers factory preset timings
    * 12 user-defined settings: allows users to adjust timing to meet their specific needs
    * Time-split scheduling: allows user to program the system to have several timing schedules at different times of day, thus taking into account differences in traffic flow at the different times of the day
    * Software allows user to download a status log from the controller to a laptop.

Options:

    * Countdown display
    * Battery charger
    * AC connection
    * Directional antennas for distances over 1 mile (1.6km)

Trolley Material:

    * Steel battery/control box
    * Aluminum tube mast 51 mm x 51 mm x 3.175 mm (2" X 2" X 1/8")
    * Steel stabilizing arms

Batteries:

    * 6-volt 220 amp/hour deep-cycle batteries wired to provide a 12-volt system
          o Optional: Various batteries and configurations available
    * 10 gauge battery cables

Lift Mechanism:

    * 90 lb Gas Shocks

Tires:

    * 10" Rubber tires

Paint:

    * State-of-the-art powder coating system
    * Highway safety orange » is the standard color used
          o Optional: Other colors available to comply with different regulations
    * Powder coating quality
          o Certified UV protect paint
          o Impact resistant
          o Humidity resistant
          o Salt spray resistant

Maintenance:

    * Battery fluids should be checked and topped off at least once a month
    * Visual inspection of mast cable

Warranty:

    * 1-year warranty on complete trolley
    * 6-month manufacturer’s warranty on batteries

Tech Support:

    * 24/7 technical support

Solar Arrow Board (25 LED Lights)

0.00

The St-4825 is a solar powered trailer mounted arrow board consisting of a 25 LED lights board with solar panel, and a battery bank, all mounted on a heavy-duty towable trailer.

OVERALL DIMENSIONS:

    * Overall length: 3429 mm (135”)
    * Overall Width: 1676 mm (66”)
    * Overall Height: 3429 mm (135”)
    * Traveling height: 2337mm (92”)
    * Operating height: 3429 mm (135”)

Programming:

    * Flashing mode: Right arrow, left arrow, double arrow, caution bar, chevron, sequential, four-corner

Display:

    * 4’ x 8’ 25 LED light panel.

Solar power supply:

    * Various configurations of solar panels and batteries are available
    * Solar regulator with battery surcharge protection

Option:

    * Battery charger
    * Adjustable pintle hitch
    * 2" coupler or 2 5/16" coupler
    * 120 volt AC connection
    * Torsion axel
    * Safety lock: Wheel, battery boxes, ext.
    * Tongue wheel jack
    * Contrast boarder (Ex: reflective)
    * Level (to stabilize sign)

TEMPERATURE RANGE:

    * Operational: -40° to + 74°C
      (-40° to +165° F)
    * Storage: -40° to + 85°C (-40° to +185° F)

CONTROLLER:

    * Rotary switch function switch
    * Built-in solar regulator
    * Battery saver automatic shut-off feature
    * Flashing mode: right arrow (10 lamps), left arrow (10 lamps), double arrow (13 lamps), caution (4 lamps), caution bar (7 lamps), chevron (15 lamps)
    * Flash rate is constant regardless of voltage or load with a flash cycle of 40
    * Automatic intensity control via photocell for nighttime mode

ELECTRICAL INTERFERENCE:

    * The ST-4825 is not affected by all normal (standard) types of RF interference

RELATIVE HUMIDITY RANGE:

    * Operating 10 to 95% RH, non-condensing

TRAILER MATERIAL:

    * 51 mm x 152 mm x 3.175 mm
      steel tubing (2’’ X 6’’ X 1/8”)
    * Diamond plate catwalk is mounted on the display side of the trailer to simplify maintenance.

CABINETS:

    * Aluminum Arrow sign
    * Plastic battery boxes
          o Optional: steel battery boxes, safety locking bars
    * Weather stripping sealing each compartment against moisture

AXLE:

    * Single 907 kg (2000-lb) rated straight hydraulic axle

HITCH:

    * Heavy-duty hitch capacity
      with 72 mm (3”) pintle eye
      Optional: 51 mm (2”) ball coupler
    * 1361 kg (3000-lb) maximum tongue load
    * Heavy-duty safety chains with safety hooks meeting safety standards

TIRES & WHEELS:

    * Tires: Load Range D 381 mm (15")
    * Wheel Size: 381 mm (15")
    * 5-stud tire rims
      Optional: Anti-theft locking mechanism

LEVELING JACKS:

    * Two-screw jacks each rated at 907 kg (2000 lbs)
      Optional: Tongue wheel jack

TRAILER LIGHTS:

    * State-of-the-art halogen lighting per USDOT standards and specifications
    * Custom made connections complying with customer specifications

LIFT MECHANISM:

    * Manual winch

SOLAR PANELS:

    * Various configurations of solar panels and batteries are available.
    * High efficiency single-crystal silicon cells anti-reflected coated for improved efficiency.

BATTERIES:

    * 6-volt 220 amp/hour deep-cycle batteries wired to provide a 12-volt system
      Optional: Various batteries and configurations available

LEGIBILITY:

    * Messages displayed are easily legible at over 1600 meters (5249 feet)

DISPLAY:

    * 590nm (± 2nm) amber-color LEDs
    * LEDs have a rated life of 100,000 hours
    * Each amber-color LED is encased in an enhanced optical lens to maximize legibility from all distances
    * LED output adjusts automatically to ambient light conditions
    * 100 brightness levels
      (1-100% by steps of 1%)

PAINT:

    * State-of-the-art powder coating system
    * « Highway safety orange »
    * is the standard color used
      Optional: Other colors available to comply with different regulations or match client fleet standard

    * Powder coating quality
          o Certified UV protect paint
          o Impact resistant
          o Humidity Resistant
          o Salt spray resistant

MAINTENANCE:

    * Battery fluids should be checked and topped off at least once per month
    * Solar panels must be free of dust and snow

WARRANTY:

    * 1-year warranty on complete trailer
    * 2-year warranty on electronics
    * 6-month manufacturer’s
      warranty on batteries
    * Limited warranty on solar panels differ from one manufacturer to another

TECH SUPPORT:

    * 24/7 technical support

$4,800 each

Lowest price in the industry! for more information call U.S. Barricades at 203-883-8660

Solar Arrow Board (15 LED Lights)

0.00

The ST-4815 is a solar powered trailer mounted arrow board consisting of a 15 LED lights board with solar panel and battery bank, all mounted on a heavy-duty trailer.


DIMENSIONS:

    * Overall length: 3429 mm (135”)
    * Overall Width: 1676 mm (66”)
    * Overall Height: 3429 mm (135”)
    * Traveling height: 2337mm (92”)
    * Operating height: 3429 mm (135”)

PROGRAMMING:

    * Flashing mode: right arrow, left arrow, double arrow, caution bar, four-corner

SOLAR POWER SUPPLY:

    * Various configurations of solar panels and batteries are available
    * Solar regulator with battery surcharge protection

OPTIONS:

    * Battery charger
    * Adjustable pintle hitch
    * 2" coupler or 2 5/16" coupler
    * 120 volt AC connection
    * Torsion axle
    * Safety lock: Wheel, battery boxes, ext.
    * Tongue wheel jack
    * Level (to stabilize sign)

TEMPERATURE RANGE:

    * Operational: -40° to + 74°C
      (-40° to +165° F)
    * Storage: -40° to + 85°C (-40° to +185° F)

CONTROLLER:

    * Rotary switch function switch
    * Built-in solar regulator
    * Battery saver automatic shut-off feature
    * Flashing mode: right arrow (10 lamps), left arrow (10 lamps),
      double arrow (13 lamps), caution (4 lamps)
    * Flash rate is constant regardless of voltage or load with a flash cycle of 40
    * Automatic intensity control via photocell for nighttime mode

ELECTRICAL INTERFERENCE:

    * The ST-4815 is not affected by all normal (standard) types of RF interference

RELATIVE HUMIDITY RANGE:

    * Operating 10 to 95% RH, non-condensing

TRAILER MATERIAL:

    * 51 mm x 152 mm x 3.175 mm
      steel tubing (2’’ X 6’’ X 1/8”)
    * Diamond plate catwalk is mounted on the display side of the trailer to simplify maintenance.

CABINETS:

    * Aluminum Arrow sign
    * Plastic battery boxes
          o Optional: steel battery boxes, safety locking bars
    * Weather stripping sealing each compartment against moisture

AXLE:

    * Single 907 kg (2000-lb) rated straight hydraulic axle

HITCH:

    * Heavy-duty hitch capacity
    * with 72 mm (3”) pintle eye, optional: 51 mm (2”) ball coupler
    * 1361 kg (3000-lb) maximum tongue load
    * Heavy-duty safety chains with safety hooks meeting safety standards

TIRES & WHEELS:

    * Tires: Load Range D 381 mm (15")
    * Wheel Size: 381 mm (15")¸
    * 5-stud tire rims, optional: Anti-theft locking mechanism

LEVELING JACKS:

    * Two-screw jacks each rated at 907 kg (2000 lbs)
          o Optional: Tongue wheel jack

TRAILER LIGHTS:

    * State-of-the-art halogen lighting per USDOT standards and specifications
    * Custom made connections complying with customer specifications

LIFT MECHANISM:

    * Manual winch

SOLAR PANELS:

    * Various configurations of solar panels and batteries are available.
    * High efficiency single-crystal silicon cells anti-reflected coated for improved efficiency.

BATTERIES:

    * 6-volt 220 amp/hour deep-cycle batteries wired to provide a 12-volt system
          o Optional: Various batteries and configurations available

LEGIBILITY:

    * Arrows displayed are easily legible at over 1600 meters (5249 feet)

DISPLAY:

    * 590nm (± 2nm) amber-color LEDs
    * LEDs have a rated life of 100,000 hours
    * Each amber-color LED is enhanced optical lens to maximize legibility from all distances
    * LED output adjusts automatically to ambient light conditions
    * 100 brightness levels
      (1-100% by steps of 1%)

PAINT:

    * State-of-the-art powder coating system
    * « Highway safety orange »
    * is the standard color used
          o Optional: Other colors available to comply with different regulations or match client fleet standard
    * Powder coating quality
          o Certified UV protect paint
          o Impact resistant
          o Humidity Resistant
          o Salt spray resistant

MAINTENANCE:

    * Battery fluids should be checked and topped off at least once per month
    * Solar panels must be free of dust and snow

WARRANTY:

    * 1-year warranty on complete trailer
    * 2-year warranty on electronics
    * 6-month manufacturer’s
      warranty on batteries
    * Limited warranty on solar panels differ from one manufacturer to another

TECH SUPPORT:

    * 24/7 technical support


$4,400 each

Lowest price in the industry! for more information call U.S. Barricades at 203-883-8660

Traffic Beacon 12 inch LED Amber

0.00

U.S. Barricade Warning Beacon attracts attention to important roadside signs or information and is ideal for a range of traffic applications. Road safety is heavily reliant on a driver’s compliance with roadside signs, including speed limits, merging traffic, stoplights, etc. By using a solid state flashing beacon to draw attention to hidden, changing, or approaching road conditions such as an intersection not yet in view, our warning beacon increases driver awareness and thereby enhances overall roadside safety.

Benefits:

    * Increases roadside safety by warning drivers of hidden or approaching hazards
    * Rugged high-quality signal housing
    * Reliable solid-state flasher control
    * Multiple configurations for mounting framework

Beacon:

    * Aluminum or polycarbonate
    * Aluminum powder coated, polycarbonate colored resins
    * Federal yellow, signal green, black, or custom colors
    * 2.0” hole top and bottom fits 1.5” NPT fittings
    * Terminal block installed
    * Stainless steel door roll pins and eye bolt/wing nut assemblies
    * Weathertight E.P.D.M. rubber door gasket

Options:

    * 365 day solid state programmable time clock
    * Time clock module without dimming relay
    * Various signal modules including LED
    * Two flashing beacons
    * Photocell

Traffic Beacon 8 inch LED Amber

0.00

A-Frame Parade Barricade (High Intensity)

0.00

U.S. Barricades innovative Parade Barricade has the durability and the versatility you demand of an “A-Frame” barricade! Made of durable high density polyethylene, the O-Frame is U.V. stabilized and designed to take severe abuse in any weather conditions. Our plastic parade barricade is an easy and convenient solution for any city or town setting up for special events, parade routes, utility service or traffic control that need to be cordoned off.

The O-Frame can be ordered with one (Type I) or two (Type II) barricade panels with reflective sheeting available on one or both sides. Barricade panels can be ordered with 3M Engineer Grade, High Intensity or Diamond Grade reflective sheeting and in lengths of 4, 6, 8 &10 feet. Engineered to meet all ADA, NCHRP 350 & MUTCD standards.

Specifications:

• Impact-resistant and UV-stable thermoplastic for superior durability
• The only barricades with a 3-year pro-rated warranty!
• Engineered to conform to ADA, NCHRP 350 & MUTCD standards
• Panels have smooth surfaces to allow easy application of reflective tape
• Flexibility to use 1 x 8-inch or 2 x 8-inch barricade panels
• Panels available in 4, 6, 8, 10 and 12-foot standard lengths
• Rigid injection molded legs will not sag in the heat of the sun
• Barricade legs with molded-in holes for attachment of lights
• Barricade legs stack for easy transit & efficient storage
• Panels & legs available for purchase separately or together
• Choose from Engineer, High Intensity or Prismatic sheeting
• Panels can be factory-sheeted on one or both sides
• 3-Year Warranty
• Made in the United States

Innovative O-Frame Leg:

• Unique four board design
• Center slots have pinch points to lock in the boards
• Molded nubbins for stacking also stabilize barricade light
• Solid injection molded leg - stronger than blow molding
• Versatile - Accommodates plastic or wood panels
• 1 x 8” plastic panels
• 2 x 8” plastic panels
• 2 x 8” nominal lumber
• Flexibility to convert to a Type I or Type II using the same components.
• Flexibility to convert to ADA Compliant Type II using the same components.

ADA compliant barricade Legs stack for easy storage MUTCD compliant barricade

Tear Drop Stackable Channelizer Cone

0.00

Tear Drop Channelizer cones are manufactured using state-of-the-art technology. New precision molding machines produce consistent, high quality channelizer that will give you years of reliable use. All U.S. Barricades channelizer cones are proudly made in the United States.

Features:

• Most durable and impact resistant design in the industry.
• Enlarged handle to accommodate gloved workers.
• Unique tear drop handle with mounting hole for warning light.
• Multi-function (three uses in one), sleeved cone, delineator post & channelizer device.
• Recessed areas protect sheeting from tearing or peeling.
• Extra large flanged bottom, very stable.
• Stackable with base.
• Tested and certified to meet all NCHRP-350 requirements.
• 3M Reflective tape comply with latest MUTCD and D.O.T. specifications.

Specifications:

• Material - Polyethylene.
• Color - Fluorescent orange, drum orange or white.
• Weight - 3 pounds.
• Height - 42" plus 6.5" handle.
• Dimensions - Top tier starts at 4" widening to 8"
• Bottom Flange - 11"

Options:

• Channelizer Material - Low or high density polyethylene.
• Base Weight - 11, 15 and 30 pounds
• Base Size - Octagon: 16 1/2" x 1 3/4" or Rectangular: 18" x 28" x 2"
• Reflectivity - Engineer Grade, High Intensity (HIP) and Diamond Grade.
• Reflective Banding - Up to 6 bands of 6" sheeting.

Solar Message Board (Three Line)

0.00

Solar powered three-line full size message board are one hundred percent NTCIP-compliant and can be easily controlled by any NTCIP-compliant traffic management software. Our robust design, plug and play components, and energy efficient technology provide a sign that requires minimal maintenance and has a low cost to own.

Structure

Overall length: 4470 mm (176")
Overall width: 2184 mm (86")
Display panel: 1803 mm x 3378 mm (71" x 133")
Panel construction: Aluminum
Traveling height: 2794 mm (110")
Operating height: 4572 mm (180")
Weight: 1133 kg (2500 lb.)
Coupler or 3" pintle eye
Axle/suspension: 1587.6 kg (3500 lb.)

Display

3 lines, 8 characters per line (12" x 18")
4 LEDs per pixel in optical lens with 30° wide viewing angle
5 x 7 pixels per character
18" character default font
Display sign rotates 360 degrees
Easy access and walk-way for maintenance
Plug & play display modules
On-site interface for self-error detection system and test pattern
LED output adjusts automatically to ambient light conditions
100 brightness levels (1%-100% in increments of 1%)

Features

Changeable messages (default 255) (*1-999)
Permanent messages (default 258) (*1-999)
Volatile messages (default 64) (*1-999)
Permanent Font sizes (15)
Custom Changeable Font sizes (*5)
Per character font sizing
Per character & line flashing
Admin & User level password
Auto brightness (photocell)
Manual 0 -100% brightness levels (increments of 1%)
Scheduling
Scrolling
Special dynamic data features trigger messages, displays motorist speed, actual temperature, time & date & live countdown
NTCIP compatibility (see detailed specs)
Easy integration to Software management
Already Supported by: Delcan, IBI, etc.

Programming

On-site using unit keyboard
Easy three-step programming category
High-speed remote programming from your PC with cellular option
Ethernet port (10/100)
2x additional RS-232 ports

Solar power supply

Tilt and Roate solar panel rack
Various configurations of solar panels and batteries available
Solar regulator with battery surcharge protection
High efficiency single-crystal silicon cells anti-reflective coated for improved efficiency

Options

3G modem, can support fiber optic, radio communication
Free access to our remote fleet management software Jamlogic2 (1._PDF)
Radar
Data logger (requires radar)
GPS tracking
Easy graphic LCD touchscreen
Intelligent display sign with pixel detection
Battery charger
Laptop connection
Adjustable pintle hitch
2" coupler or 2 5/16" coupler
120 volt AC connection
Hydraulic or Electric Brakes
Traffic camera
Safety lock: Wheel, battery boxes, etc..
Spare tire
Tongue wheel jack
Level (to stabilize sign)

WARRANTY

1-year warranty on complete trailer
2-year warranty on electronics
6-month manufacturer’s warranty on batteries
Limited warranty on solar panels varies from one manufacturer to another

TECH SUPPORT

24/7 technical support

Solar Traffic Signal 2000

0.00

Our new generation of solar powered traffic lights have all of the latest features bringing safety and versatility to a new level at the lowest price in the industry. US Barricades new trailer mount solar traffic signal 2000 is one 12" LED signal head unit on each trailer. Synchronization is maintained through radio communications with the primary and secondary trailers may be positioned up to 1 mile (1.6km) apart. Signal communications options available for greater distances.

OVERALL DIMENSIONS:

    * Overall length: 3314.7 mm (131")
    * Overall width: 1676.40mm (66")
    * Traveling height:   2438 mm (96")
    * Operating height:   3682 mm (145")
    * Weight: 408.23 kg (900 lb.)
    * Coupler: 2" coupler or 3" pintle eye
    * Axle/suspension: 907 kg (2000 lb.)

CONTROLS:

    * Main power switch
    * Raise / lower switch
    * Handheld
          o LCD Display
          o Alphanumeric Keypad
    * Battery charger switch

HAND HELD:

    * LCD Display
    * Alpha/numeric Keypad

PROGRAMMING:

    * On-site or remote programming
          o On-site primary capable of controlling multiple units.
    * Adjustable sequences of operation of the traffic signal unit(s)
    * Accommodates variations of additional devices, extra signal units and/or certain prioritized traffic movements depending on the special needs of the particular installation site (intersection)

Normal traffic control pattern types:

    * Access (one signal head)
    * Shuttle
    * Two-way
    * T-junction
    * Crossroads
    * Customizable for multi-direction installation sites
    * System can be also programmed for four (4) Actuated operation types:
    * Vehicle Detector
    * Emergency Pre-emption
    * Manual operation by on-site operator
    * Pedestrian activation
    * Storage of up to twenty (20) fixed-time phase plans (complete sequence of signal indications)
    * Built-in fail-safe barriers eliminate creation of conflicting traffic movements
    * Programmable sequences
    * Complete on-site configuration and real-time program monitoring - operator can view the signal display on screen while it is running
    * Pre-determined time-split schedules from central controller, downloadable by on-site operator
    * Monitoring
    * Choice of alarm indications
    * Circular Red Flashing
    * Circular Yellow Flashing

CONTROLLER MENU DISPLAY (LCD)

    * Current usage and battery voltage
    * Solar array current output (to the battery) and voltage
    * Sign status (error detection)

ELECTRICAL INTERFERENCE:

    * The TLD-2000 is not affected by any normal (standard) types of RF interference

TEMPERATURE RANGE:

    * Operational: -40° to + 74°C
      (-40° to +165° F)
    * Storage: -40° to + 85°C (-40° to +185° F)

RELATIVE HUMIDITY RANGE:

    * Operating 10 to 95% RH, non-condensing

TRAILER MATERIAL:

    * 51 mm x 152 mm x 3.175 mm
      steel tubing (2" X 6" X 1/8")
    * Diamond plate catwalk is mounted on the display side of the trailer to simplify maintenance.

CABINETS:

    * Aluminum control cabinets
    * Locked with padlocks
    * Plastic battery boxes
          o Optional: steel battery boxes, safety locking bars
    * Weather stripping sealing each compartment against moisture

AXLE:

    * Single 907 kg (2000 lb.) axle

HITCH:

    * Heavy-duty hitch capacity with 72 mm (3") pintle eye
          o Optional: 51 mm (2") ball coupler
    * 1361 kg (3000-lb) maximum tongue load
    * Heavy-duty safety chains with safety hooks meeting safety standards

TIRES & WHEELS:

    * Tires: Load Range D 381 mm (15")
    * Wheel Size: 381 mm (15")
    * 6-stud tire rims
          o Optional: Anti-theft locking mechanism

LEVELING JACKS:

    * Four-screw jacks each rated at 907 kg (2000 lbs)
          o Optional: Tongue wheel jack

TRAILER LIGHTS:

    * State-of-the-art halogen lighting per USDOT standards and specifications
    * Custom made connections complying with customer specifications

LIFT MECHANISM:

    * Manual Winch

SOLAR PANELS:

    * Various configurations of solar panels and batteries are available.
    * High efficiency single-crystal silicon cells anti-reflected coated for improved efficiency.

BATTERIES:

    * 6-volt 220 amp/hour deep-cycle batteries wired to provide a 12-volt system
          o Optional: Various batteries and configurations available

PASSWORD PROTECTION:

    * Handheld interface password protected

PAINT:

    * State-of-the-art powder coating system
    * « Highway safety orange »
    * is the standard color used
      Optional: Other colors available to comply with different regulations or match client fleet standard

    * Powder coating quality
          o Certified UV protect paint
          o Impact resistant
          o Humidity Resistant
          o Salt spray resistant

MAINTENANCE:

    * Battery fluids should be checked and topped off at least once per month
    * Solar panels must be free of dust and snow

WARRANTY:

    * 1-year warranty on complete trailer
    * 2-year warranty on electronics
    * 6-month manufacturer’s
      warranty on batteries
    * Limited warranty on solar panels differ from one manufacturer to another

TECH SUPPORT:

    * 24/7 technical support

Type I Barricade (12x24 panel) Plastic

0.00

U.S. Barricades are the finest NCHRP-350 approved Type I plastic barricade made in America. Latest technology in stress and impact absorption with exclusive waffle-board design on back make our barricade the strongest most reliable in the industry.

All type I barricades are made with 3M Engineering Grade, High Intensity or Diamond grade sheeting to conform with all local, state and federal regulations.

• Width 24"
• Height 42"
• Weight 14 lbs.
• Thickness 2 1/4"
• Top panel 12"x 24", bottom panel 8"x 24"
• Plastic high density polyethylene.
• Unique recessed molded light mount brackets sized for standard bolts.
• Protective anti-skid/wear tabs on bottom of legs.
• Non-shifting stacking lugs.
• Capable of internal sand ballasting, up to 30 pounds.
• Barricade lays flat upon impact.
• Holds many sizes of signs.
• Resistant to extreme temperatures.
• Convenient molded carry-handle.
• Made in the United States.

Lowest Price in the United States!

Minimum order of 10 units, call U.S. Barricades at 203-883-8660 for large orders and shipping discounts.

Type I Barricade (8x24 panel) Plastic

0.00

U.S. Barricades are the finest NCHRP-350 approved Type I plastic barricade made in America. Latest technology in stress and impact absorption with exclusive waffle-board design on back make our barricade the strongest most reliable in the industry.

All type I barricades are made with 3M Engineering Grade, High Intensity or Diamond grade sheeting to conform with all local, state and federal regulations.

• Width 24"
• Height 42"
• Weight 14 lbs.
• Thickness 2 1/4"
• Top panel 8"x 24", bottom panel 8"x 24"
• Plastic high density polyethylene.
• Unique recessed molded light mount brackets sized for standard bolts.
• Protective anti-skid/wear tabs on bottom of legs.
• Non-shifting stacking lugs.
• Capable of internal sand ballasting, up to 30 pounds.
• Barricade lays flat upon impact.
• Holds many sizes of signs.
• Resistant to extreme temperatures.
• Convenient molded carry-handle.
• Made in the United States.

Minimum order is 10 units, call U.S. Barricades at 203-883-8660 for larger orders and shipping discounts.

Type B LED Warning Light (Solar)

100.00

Solar panel charges D-Cell batteries to give a superior long lasting reliable power source.
No need to replace expensive rechargeable batteries like other solar lights.
Operates on D-Cell Alkaline Batteries.
Polycarbonate lenses and High Impact Polypropylene housing.
Servicing is made easy with a snap-lock case and vertically positioned batteries.
Bright and dependable LED’s coupled with power efficient.
Reliable moisture proof circuitry, provide trouble-free operation.
Tested to MUTCD and I.T.E. standards by an approved certified laboratory.
Made in the United States.

D Cell Battery Pack Large Solar Panel

$100.00 Each

Runway-Taxiway Reflective Marker

35.99

Runway or Taxiway reflective airport markers are used to outline the edges of runways and taxiways. These airport markers utilize 3M High-Intensity reflective sheeting for increased visibility. The 2-1/4" posts are made of co-extruded polyethylene with U.V. inhibitors for superior corrosion resistance and durability. They can be installed on asphalt, concrete, fire hydrants or in soil. The runway-taxiway markers utilize only high strength plastic fasteners for long term performance. This, combined with the self restoring nature of the marker, helps keep life cycle costs among the lowest in the industry.

Features:
• FAA Approved L-853.
• Minimal maintenance. Post rebounds to an upright position without human intervention.
• Easy to install using post-integrated locking pins, takes only minutes.
• Durable and corrosion resistant. No above-ground metal parts of any kind!
• Integrated locking tabs allow for quick post installation and replacement.
• Provides 360 degree visibility with high-intensity wraparound reflective sheeting.
• Surface mount, fire hydrant mount, and soil anchor versions available.
• Posts are constructed of UV resistant durable linear low density, co-extruded polyethylene.

$35.99 each

Airport Warning Light (6v D-Type)

43.75

Our Airport Construction D-Type Warning Light is the only light that utilizes four LED's to project a very bright 360 degree flashing light pattern, all other company's use only two LED's. The Airport 63 light is the brightest most durable light in America and is the only light in industry that comes with a one year warranty. This light is molded, assembled and manufactured in the United States of America.

Utilizes 4 LED bulbs to project an omni-directional light pattern, brightest light in the industry!
Available in steady burn or flashing configurations.
Two spring type 6 volt batteries will power a flashing light for up to 9 months.
Photoelectrically controlled.
Manual on/off switch recessed inside battery case.
Polycarbonate Red dome with HD polypropylene case.
One year warranty.
Made in the United States.

$43.75

Airport Warning Light (Solar)

139.75

Solar light utilizes 4 LEDs to project an omni-directional light pattern.
Lasts up to 6 days without charging once it is fully charged.
Available in steady burn or flashing 3 way configuration.
Output of 3 to 5 candela in steady burn mode and 2.5 to 7 candela in flashing mode.
Meets and exceeds all I.T.E. specifications for a Type-D light.
Manual on/off switch recessed inside battery case.
Polycarbonate Red dome with HD polypropylene case.
Rechargeable battery pack will last for years with reliable continuous use.
One year warranty.
Made in the United States.

Large Solar Panel Solar Battery Pack

$139.75 each

Airport Construction Light (Solar)

49.75

Our Solar Airport Construction Warning Light is the only light that utilizes four LED's to project a very bright 360 degree flashing light pattern. The Airport 60 light is the number one selling light in America and is the only light in industry that comes with a one year warranty. This light is molded, assembled and manufactured in the United States of America.

Utilizes 4 LEDs to project a 360 degree flashing light pattern.
Internal solar panels allow light to emit through top of dome giving more visibility to pilots.
Standard 2" water pipe thread allows for easy installation.
Manual external on/off switch.
Polycarbonate dome and base.
One Year Warranty .
Made in the United States.

Manual On/Off Switch Optional Clamp Internal Solar Panel

$49.75 each

Type B LED Warning Light (3 volt)

65.00

Available in 12 volt, 6 volt or 3 volt configurations.
Meets or exceeds all I.T.E. and MUTCD standards.
Tested in approved certified laboratory.
Polycarbonate lenses and High Impact Polypropylene housing.
Can operate on one or two spring terminal batteries in 3 volt or 6 volt configurations.
May be considered a lightweight light meeting NCHRP 350 when using one battery.
Type B 6v will operate on one six volt air alkaline battery for 150 days and two months with two industrial grade batteries, and the 212-3 will operate over 300 days on two 3v alkaline batteries.

$65.50 Each

Type B LED Warning Light (12 volt)

0.00

Available in 12 volt configurations.
Meets or exceeds all I.T.E. and MUTCD standards.
Tested in approved certified laboratory.
Can operate on one or two spring terminal batteries in 3 volt or 6 volt configurations.
May be considered a lightweight light meeting NCHRP 350 when using one battery.
Type B 12v LED will provide adequate signal for up to sixty days.
Polycarbonate lenses and High Impact Polypropylene housing.
One Year Warranty.
Made in the United States.

Type-B Red Warning Flasher (Solar Powered)

100.00

Solar panel charges D-Cell batteries to give a superior long lasting reliable power source.
No need to replace expensive rechargeable batteries like other solar lights.
Operates on D-Cell Alkaline Batteries.
Polycarbonate lenses and High Impact Polypropylene housing.
Servicing is made easy with a snap-lock case and vertically positioned batteries.
Bright and dependable LED’s coupled with power efficient.
Reliable moisture proof circuitry, provide trouble-free operation.
Tested to MUTCD and I.T.E. standards by an approved certified laboratory.
Made in the United States.

Solar Powered Type-B Light with Yellow Lens

$100.00 Each

Type-B Red Warning Flasher (6 volt)

65.50

Lightweight High Intensity Lights.
Acceptable Device for NCHRP-350
Operates on D-Cell Batteries.
Tested to MUTCD and I.T.E. standards by an approved certified laboratory.
Polycarbonate lenses and High Impact Polypropylene housing.
Discounts For Federal operations, State DOTs and Municipalities.
One Year Warranty.
Made in the United States.

Model 212-6LW is a 6 volt system that will project an adequate signal for up to sixty days on 4 D-Cell Alkaline Batteries.

Model 212-3LW is a 3 volt system that can operate on two to four D-Cell batteries. It will project an adequate signal for over 60 days on two D-Cell Alkaline Batteries and over 120 days with four D-Cell Alkaline Batteries.

$65.50 Each

Type-B Red Warning Flasher (3 volt)

65.50

Lightweight High Intensity Lights.
Acceptable Device for NCHRP-350 (see WZ-54)
Operates on D-Cell Batteries.
Tested to MUTCD and I.T.E. standards by an approved certified laboratory.
Polycarbonate lenses and High Impact Polypropylene housing.
Discounts For Federal operations, State DOTs and Municipalities.
Made in the United States.

Model 212-3LW is a 3 volt system that can operate on two to four D-Cell batteries. It will project an adequate signal for over 60 days on two D-Cell Alkaline Batteries and over 120 days with four D-Cell Alkaline Batteries.

Model 212-6LW is a 6 volt system that will project an adequate signal for up to sixty days on 4 D-Cell Alkaline Batteries.

$65.50 Each

STATE LAW YIELD FOR PEDESTRIAN (R1-6) FYG w/Portable Base

250.00

STATE LAW YIELD FOR PEDESTRIAN (R1-6) Diamond Grade VIP Fluorescent Yellow Green (FYG) sheeting with portable rubber base is designed for in-street use at non signalized crosswalks. Signs have an overall height of 47" with a panel size of 12"x36". Back-to-back panels are sheeted with 3M™ Diamond Grade VIP Fluorescent Yellow Green (FYG) sheeting and is MUTCD, state DOT and NCHRP 350 approved.

All signs are equipped with an anti-twist feature to keep the panels properly aligned. Post are Fluorescent Yellow Green flexible polyethylene plastic, resistant to UV, ozone and hydrocarbons. Select the base type, or order replacement sign assemblies 'without base'. Signs come in poly-carb Lexan or aluminum.

Portable 39lbs Rubber Base:
A rubber base for demanding applications; it has the weight to support the larger crosswalk signs. For an added convenience the 39lb base features a recessed handle, which makes picking up and moving it a snap. Bases also nest together for easy storage during transport.

$250.00 each

STATE LAW YIELD FOR PEDESTRIAN (R1-6) FYG w/Ground Mount Base

235.00

STATE LAW YIELD FOR PEDESTRIAN (R1-6) Diamond Grade VIP Fluorescent Yellow Green (FYG) sheeting with ground mount base are designed for in-street use at non signalized crosswalks. Signs have an overall height of 47" with a panel size of 12"x36". Back-to-back panels are sheeted with 3M™ Diamond Grade FYG sheeting and is MUTCD, state DOT and NCHRP 350 approved.

All signs are equipped with an anti-twist feature to keep the panels properly aligned. Post are Fluorescent Yellow Green flexible polyethylene plastic, resistant to UV, ozone and hydrocarbons. Select the base type, or order replacement sign assemblies 'without base'. Signs come in poly-carb Lexan or aluminum, available bases units are below.

300 Black Ground Base:
The 300 black ground mount base is for fixed installations where the post and base will remain on the road surface for an extended period of time. Bases are constructed of a UV-stable high-impact plastic. Safety posts are mounted to the base with two nylon quick release locking pins. Ground mount base units are secured to the roadway with either epoxy or bolts.

300 Color Ground Base:
The 300 color ground mount base is for fixed installations where the post and base will remain on the road surface for an extended period of time. Our colored bases match our colored posts, providing an extra measure of conspicuity. Standard color is Fluorescent Yellow Green, other colors are available by special order. Bases are constructed of a UV-stable high-impact plastic. Safety posts are mounted to the base with two nylon quick release locking pins. Ground mount base units are secured to the roadway with either epoxy or bolts.

300 Invisi-Base:
Invisi-Base – for installations flush with the pavement is the best method for northern states.

300 Color Base Invisi-Base 300 Black Base

$235.00 EACH

STATE LAW YIELD FOR PEDESTRIAN (R1-6) HIP w/Portable Base

225.00

STATE LAW YIELD FOR PEDESTRIAN (R1-6) High Intensity Sheeting (HIP) with portable base is designed for in-street use at non signalized crosswalks. Signs have an overall height of 47" with a panel size of 12"x36". Back-to-back panels are sheeted with 3M™ High Intensity sheeting and is MUTCD, state DOT and NCHRP 350 approved.

All signs are equipped with an anti-twist feature to keep the panels properly aligned. Post are flexible polyethylene plastic, resistant to UV, ozone and hydrocarbons. Select the base type, or order replacement sign assemblies 'without base'. Signs come in poly-carb Lexan or aluminum.

Portable 39lbs Rubber Base:
A rubber base for demanding applications; it has the weight to support the larger crosswalk signs. For an added convenience the 39lb base features a recessed handle, which makes picking up and moving it a snap. Bases also nest together for easy storage during transport.

$225.00 Each

Airport Barrier

0.00

US Barricade 96" airport safety barrier is a specialty barrier that is superior in strength and quality to the competition. Our barriers are designed and built in two different sizes and can be used in a variety of traffic control and security applications. Airport barriers meets or exceeds all standards under FAA Advisory Circular 150-5370-2E.

All of our plastic airport barriers are made by a rotational molding process by which a one-piece, seamless advanced plastic product is manufactured, this will give you the strongest most reliable portable traffic safety barrier made in the United States. While filled with either ballast the US Barricade airport barrier will not bulge or distort like other portable barricades and will last for years.

The use of heavy equipment is not necessary for installation or relocation, all of our barricades have fork truck entries if needed, easy to move. When positioned and filled with either water or sand the barricade can act as a protective wall or prefabricated revetment wall. Mounting points for safety lights and flags are built into the barriers, lights and flags are options.

Airport Barrier 50

Standard Colors: Safety Orange, White, Olive Drab and Military Tan.
Composition: UV-Resistant Polyethylene
Size: Height: 24" / 610 mm
Length: 96" / 2438 mm
Width: 16" / 407 mm
Wall: .25” / 6.35 mm (Avg.)
Mass: 50 lb. (empty) / 785 lbs. (filled with 88 gal. water) (1227 lbs. filled with sand)

Features:

* Standard colors Safety Orange and White. Other colors will require additional lead times.
* recyclable material
* lightweight
* durable
* drain plugs
* structurally sound
* variety of colors
* 25lbs
* Pre-molded attachment area for flashing lights.

Airport Barrier (low profile)

0.00

US Barricade 96" low profile airport safety barrier is a specialty barrier that is superior in strength and quality to the competition. Our barriers are designed and built in two different sizes and can be used in a variety of traffic control and security applications. Airport barriers meets or exceeds all standards under FAA Advisory Circular 150-5370-2E.

All of our plastic traffic barriers are made by a rotational molding process by which a one-piece, seamless advanced plastic product is manufactured, this will give you the strongest most reliable portable traffic safety barrier made in the United States. While filled with either ballast the US Barricade airport barrier will not bulge or distort like other portable barricades and will last for years.

The use of heavy equipment is not necessary for installation or relocation, all of our barricades have fork truck entries if needed, easy to move. When positioned and filled with either water or sand the barricade can act as a protective wall or prefabricated revetment wall. Mounting points for safety lights and flags are built into the barriers, lights and flags are options.

Airport Barrier 25

Standard Colors: Safety Orange, White, Olive Drab and Military Tan.
Composition: UV-Resistant Polyethylene
Size: Height: 10" / 256 mm
Length: 96" / 2438 mm
Width: 10" / 256 mm
Wall: .25” / 6.35 mm (Avg.)
Mass: 26 lb. (empty) / 251 lbs. (filled with 27 gal. water) (387 lbs. filled with sand)

Features:

* Standard colors Safety Orange and White. Other colors will require additional lead times.
* recyclable material
* lightweight
* durable
* drain plugs
* structurally sound
* variety of colors
* 25lbs
* Pre-molded attachment area for flashing lights.

Unsheeted: 1-25 units $126.00, Over 25 units $119.00
3M High Intensity Sheeting:1-25 units $142.00, over 25 units $136.00

Safety traffic Barrier 175 (water or sand)

495.00

US Barricade 96" safety traffic barrier or water-sand barrier is a specialty barrier that is superior in strength and quality to the competition. Our barriers are designed and built in several different sizes and can be used in a variety of traffic control and security applications.

All of our plastic traffic barriers are made by a rotational molding process by which a one-piece, seamless advanced plastic product is manufactured, this will give you the strongest most reliable portable traffic safety barrier made in the United States. While filled with either ballast the US Barricade barrier will not bulge or distort like other portable barricades and will last for years.

Plastic Safety Traffic Barrier 175

Standard Colors: Safety Orange, White, Yellow, Blue, Olive Drab and Military Tan.
Composition: UV-Resistant Polyethylene
Size: Height: 42" / 1076 mm
Length: 96" / 2438 mm
Width: 24" / 610 mm
Wall: .25” / 6.35 mm (Avg.)
Mass: 175 lb. (empty) / 2029 lbs. (filled with 222 gal. water) (3145 lbs. filled with sand)

25 or less $ 495.00 each, over 25 barriers $ 485.00 each.

Safety Traffic Barrier 170 (water or sand)

400.00

US Barricade 72" plastic safety traffic barrier or water, sand barrier is a specialty barrier that is superior in strength and quality to the competition. Our barriers are designed and built in several different sizes and can be used in a variety of traffic control and security applications.

All of our plastic traffic barriers are made by a rotational molding process by which a one-piece, seamless advanced plastic product is manufactured, this will give you the strongest most reliable portable traffic safety barrier made in the United States. While filled with either ballast the US Barricade barrier will not bulge or distort like other portable barricades and will last for years.

Plastic Safety Traffic Barrier 170

Standard Colors: Safety Orange, White, Yellow, Blue, Olive Drab and Military Tan.
Composition: UV-Resistant Polyethylene
Size: Height: 42" / 1076 mm
Length: 72" / 1829 mm
Width: 24" / 610 mm
Wall: .50” / 12.70 mm (Avg.)
Mass: 170 lb. (empty) / 1598 lbs. (filled with 171 gal. water) (2458 lbs. filled with sand)

Features:

* Recyclable material
* Lightweight
* Durable
* Drain plugs
* Structurally sound
* Variety of colors
* Pre-molded attachment area for flashing lights.

Applications Include:

    * force protection
    * crowd control barriers
    * anti-terrorism
    * gate approaches
    * border patrol
    * guard units
    * construction zones
    * airport construction
    * troop protection
    * air shows
    * traffic control
    * flight line
    * race tracks

Colors:

    * safety white
    * safety yellow
    * safety orange
    * gray granite (additional costs)
    * desert "military" tan
    * olive drab
    * additional colors available

25 or less $ 400.00 each, over 25 barriers $ 390.00 each.

Safety Traffic Barrier 130 (water or sand)

399.00

Plastic Safety Traffic Barrier 130

Standard Colors: Safety Orange, White, Yellow, Blue, Olive Drab and Military Tan.
Composition: UV-Resistant Polyethylene
Size: Height: 42" / 1076 mm
Length: 72" / 1829 mm
Width: 24" / 610 mm
Wall: .375” / 9.525 mm
Mass: 130 lb. (empty) / 1558 lbs. (filled with 171 gal. water) (2418 lbs. filled with sand)

Features:

* Recyclable material
* Lightweight
* Durable
* Drain plugs
* Structurally sound
* Variety of colors
* Pre-molded attachment area for flashing lights.

Applications Include:

    * force protection
    * crowd control barriers
    * anti-terrorism
    * gate approaches
    * border patrol
    * guard units
    * construction zones
    * airport construction
    * troop protection
    * air shows
    * traffic control
    * flight line
    * race tracks

Colors:

    * safety white
    * safety yellow
    * safety orange
    * gray granite (additional costs)
    * desert "military" tan
    * olive drab
    * additional colors available

   25 or less $ 399.00 each, over 25 barriers $ 390.00 each.

Safety Traffic Barrier 100 (water or sand)

295.00

Plastic Safety Traffic Barrier 100

Standard Colors: Safety Orange, White, Yellow, Blue, Olive Drab and Military Tan.
Composition: UV-Resistant Polyethylene
Size: Height: 42" / 1076 mm
Length: 72" / 1829 mm
Width: 24" / 610 mm
Wall: .25” / 6.35 mm
Mass: 100 lb. (empty) / 1528 lbs. (filled with 171 gal. water) (2388 lbs. filled with sand)

Features:

* Recyclable material
* Lightweight
* Durable
* Drain plugs
* Structurally sound
* Variety of colors
* Pre-molded attachment area for flashing lights.

Parking Gate 3000

0.00

• Parking Gate 3000 operates 10’ and 12’ gate arms
• Weatherproof and corrosion resistant polished stainless steel cabinet
• 1/3 HP instant reversing motor
• Proximity sensor prevents gate from striking pedestrians and vehicles
• Remotely programmable microprocessor controller (via RS-232/485 port)
• Gate operation counter built into software
• Multiple operation modes
• Resettable thermal overload motor protection
• Thermostatically controlled cabinet heater
• Made in the United States

Parking Gate-3000 Parking Lot / Access Control Gate Systems

Cabinet:
Stainless Steel unibody construction
Door:
Flush mounted with chrome lock assembly and a single internal gasket
Motor:
1/3 HP, single phase, instant reversing, 115/220V AC, 50/60 Hz
Limit Switch:
Controls gate travel so no brake device is required
Heater:
500 W thermostat controlled strip device
Drive:
Heavy duty, high cycle speed reducer with 50:1 output to the main shaft raises or lowers gate arm in two seconds.Shear/Spring Pin: Connection from main gate shaft to gate arm bracket shears off to prevent damage to internal mechanism in case of sudden gate stoppage.

Toll Plaza Parking Gate

0.00

• Parking Gate 2000 operates 14’ through 20’ gate arms
• Weatherproof and corrosion-resistant all steel cabinet
• 1/2 HP instant reversing motor
• Weatherproof and corrosion-resistant all steel cabinet
• Polished stainless steel mounting base
• NoTouch© proximity sensor prevents gate from striking pedestrians and vehicles
• Remotely programmable microprocessor controller (via RS-232/485 port)
• Multiple operation modes
• Barrier Gate operation counter built into software
• Resettable thermal overload motor protection
• Thermostatically controlled cabinet heater

Parking Gate 2000 Parking/Access Control Gate

Cabinet:
14” x 15” x 40” 12 gauge steel with a 13” x 14” x 6.25” polished stainless steel base
Door:
Flush mounted with chrome lock assembly and a single internal gasket
Paint:
Textured powder coat with silicone base. Yellow or white are the standard colors. Additional color options are available.
Motor:
1/2 HP, single phase, instant reversing, 115/220V AC, 50/60 Hz
Limit Switch:
Controls gate travel so no brake device is required
Heater:
500 W thermostat controlled strip device
Drive:
Heavy duty, high cycle speed reducer with 60:1 output to the main shaft raises or lowers gate arm in five seconds.
Shear/Spring Pin:
Connection from main gate shaft to gate arm bracket shears off to prevent damage to internal mechanism in case of sudden gate stoppage.

CG2100-1 Gate Controller

Controller:
Self-contained universal gate control device. Lane mode selection via RS-232 port on main CPU from laptop or desktop computer. 8 opto-isolated inputs, 4 opto-isolated outputs, 5 – 30V DC range wet or dry.
Environment:
-15°~149° F (-26°~65° C) with heater
Input Power:
115V AC, 50/60 Hz 220V AC optional feature
Output Signal:
12V DC, 1.5 Amps and 5V DC, 1 Amp
Convenience Outlet:
110V AC, 60 Hz, 15 Amps
Service Switches:
Three position switch to raise gate, lower gate, and normal operation mode, Power On/Off switch, Heater/Fan control switch
Microprocessor:
20 MHz PIC processor
Vehicle Detection:
PC board with one 11 pin amphenol connector for single or dual channel detectors

Parking Gate 1000

0.00

• Parking Gate 1000 operates 10’ and 12’ gate arms.
• Weatherproof and corrosion-resistant all steel cabinet
• 1/3 HP instant reversing motor.
• Remotely programmable microprocessor controller (via RS-232/485 port)
• NoTouch© proximity sensor prevents gate from striking pedestrians and vehicles.
• Gate operation counter built into software.
• Resettable thermal overload motor protection.
• Polished stainless steel mounting base.
• Resettable thermal overload motor protection.

Parking Gate 1000 Parking / Access Control Gate

Cabinet:
14” x 15” x 40” 12 gauge steel with a 13” x 14” x 6.25” polished stainless steel base
Door:
Flush mounted with chrome lock assembly and a single internal gasket
Paint:
Textured powder coat with silicone base. Yellow or white are the standard colors. Additional color options are available.
Motor:
1/3 HP, single phase, instant reversing, 115/220V AC, 50/60 Hz
Limit Switch:
Controls gate travel so no brake device is required
Heater:
500 W thermostat controlled strip device
Drive:
Heavy duty, high cycle speed reducer with 50:1 output to the main shaft raises or lowers gate arm in two seconds.Shear/Spring Pin: Connection from main gate shaft to gate arm bracket shears off to prevent damage to internal mechanism in case of sudden gate stoppage.

CG2100-1 Gate Controller

Controller:
Self-contained universal gate control device. Lane mode selection via RS-232 port on main CPU from laptop or desktop computer. 8 opto-isolated inputs, 4 opto-isolated outputs, 5 – 30V DC range wet or dry.
Environment:
-15°~149° F (-26°~65° C) with heater
Input Power:
115V AC, 50/60 Hz 220V AC optional feature
Output Signal:
12V DC, 1.5 Amps and 5V DC, 1 Amp
Convenience Outlet:
110V AC, 60 Hz, 15 Amps
Service Switches:
Three position switch to raise gate, lower gate, and normal operation mode, Power On/Off switch, Heater/Fan control switch
Microprocessor:
20 MHz PIC processor
Vehicle Detection:
PC board with one 11 pin amphenol connector for single or dual channel detectors

The CG2100-1 Gate Controller is housed inside the gate cabinet for protection. This controller unit may also be used to replace other manufacturers’ gate controls. Contact US Barricades with questions about this equipment and for information about options and accessories.

DO NOT STOP ON TRACKS (R8-8)

0.00

• DO NOT STOP ON TRACKS sign sizes 24"x 30", 36"x 48" and 48"x 60"
• U.S. Barricades aluminum regulatory signs do not rust and are guaranteed!
• Signs are made from thick .080 mil aluminum.
• All signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• Add posts, sign base and bolts to your order.
• 3M reflective signs comply with latest MUTCD and state DOT specifications.

TOW-AWAY \"symbol\" (R7-201a)

0.00

• TOW-AWAY ZONE "symbol" sign size - 12"x 6".
• Our aluminum regulatory signs do not rust and are guaranteed.
• Signs are made from thick .080 mil aluminum.
• All signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• Add posts, sign base and bolts to your order.
• All 3M reflective signs comply with the latest MUTCD and DOT specifications.

TOW-AWAY ZONE (R7-201)

0.00

• TOW-AWAY ZONE sign size - 12"x 6".
• Our aluminum regulatory signs do not rust and are guaranteed.
• Signs are made from thick .080 mil aluminum.
• All signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• Add posts, sign base and bolts to your order.
• All 3M reflective signs comply with the latest MUTCD and DOT specifications.

BUS STOP/NO PARKING w/transit logo (R7-107a)

0.00

• BUS STOP NO PARKING "symbol" with transit logo, sizes - 12"x 24".
• Our aluminum regulatory signs do not rust and are guaranteed.
• Signs are made from thick .080 mil aluminum.
• All signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• Add posts, sign base and bolts to your order.
• All 3M reflective signs comply with the latest MUTCD and DOT specifications.

Call 203-662-0822 for price, discounts for transit companies and municipalities.

PEDESTRIANS AND BICYCLES PROHIBITED (R5-10b)

0.00

• PEDESTRIANS AND BIKES PROHIBITED 30"x 18".
• Our aluminum regulatory signs do not rust and are guaranteed.
• Signs are made from thick .080 mil aluminum.
• All signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• Add posts, sign base and bolts to your order.
• All 3M reflective signs comply with the latest MUTCD and state DOT specifications.

BUS LANE \"supplemental plaque\" (R3-5g)

0.00

• BUS LANE sign size - 30"x 12".
• U.S. Barricades aluminum regulatory signs do not rust and are guaranteed!
• Signs are made from thick .080 mil aluminum.
• All road signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• Add posts, sign base and bolts to your order.
• 3M reflective signs comply with latest MUTCD and state DOT specifications.

AXLE WEIGHT LIMIT X TONS (R12-2)

0.00

• AXLE WEIGHT LIMIT X TONS sign sizes - 24"x 30" and 36"x 48".
• Our aluminum regulatory traffic signs do not rust and are guaranteed.
• Signs are made from thick .080 mil aluminum.
• All signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• Add posts, sign base and bolts to your order.
• 3M reflective signs comply with latest MUTCD and state DOT specifications.

WEIGHT LIMIT XX TONS (R12-1)

0.00

• WEIGHT LIMIT XX TONS sign sizes - 24"x 30" and 36"x 48".
• Our aluminum regulatory traffic signs do not rust and are guaranteed.
• Signs are made from thick .080 mil aluminum.
• All signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• Add posts, sign base and bolts to your order.
• 3M reflective signs comply with latest MUTCD and state DOT specifications.

KEEP OF MEDIAN (R11-1)

0.00

• KEEP OFF MEDIAN - 18"x 24", 24"x 30", 36"x 48" and 48"x 60".
• Aluminum traffic signs do not rust and are guaranteed!
• Signs are made from thick .080 mil aluminum.
• All signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• Add posts, sign base and bolts to your order.
• 3M reflective signs comply with latest MUTCD state DOT specifications.

ROAD CLOSED TO THRU TRAFFIC (R11-4)

0.00

• ROAD CLOSED TO THRU TRAFFIC 60"x 30".
• Signs are made from thick .080 mil aluminum.
• All signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• 3M reflective signs comply with the latest MUTCD and State DOT specs.
• Add posts, sign base and bolts to your order.
• Made with 3M Engineer, Hi Intensity (HIP) or Diamond Grade sheeting.

BRIDGE OUT XX MILES AHEAD (R11-3b)

0.00

• BRIDGE OUT XX MILES AHEAD sign size - 60" x 30".
• Signs are made from thick .080 mil aluminum.
• All signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• 3M reflective signs comply with the latest MUTCD and State DOT specs.
• Add posts, sign base and bolts to your order.
• Made with 3M Engineer, Hi Intensity (HIP) or Diamond Grade sheeting.

ROAD CLOSED XX MILES AHEAD (R11-3a)

0.00

• ROAD CLOSED XX MILES AHEAD sign size - 60" x 30".
• Signs are made from thick .080 mil aluminum.
• All signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• 3M reflective signs comply with the latest MUTCD and State DOT specs.
• Add posts, sign base and bolts to your order.
• Made with 3M Engineer, Hi Intensity (HIP) or Diamond Grade sheeting.

BIKE LANE (R3-17)

0.00

• BIKE LANE sign size - 30"x 24"
• Aluminum regulatory signs do not rust and are guaranteed!
• Signs are made from thick .080 mil aluminum.
• All road signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• Add posts, sign base and bolts to your order.
• 3M reflective signs comply with latest MUTCD and state DOT specifications.

FINES HIGHER (R2-6)

0.00

• FINES HIGHER sign sizes - 24"x 24", 36"x 36" and 48"x 48".
• Aluminum regulatory traffic signs do not rust and are guaranteed.
• Signs are made from thick .080 mil aluminum.
• All signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• Add posts, sign base and bolts to your order.
• 3M reflective signs comply with latest MUTCD and state DOT specifications.

NIGHT XX (R2-3)

0.00

• NIGHT Speed Limit sign sizes - 24"x 24", 36"x 36" and 48"x 48".
• Aluminum regulatory traffic signs do not rust and are guaranteed.
• Signs are made from thick .080 mil aluminum.
• All signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• Add posts, sign base and bolts to your order.
• 3M reflective signs comply with latest MUTCD and state DOT specifications.

TRUCKS XX (R2-2)

0.00

• TRUCKS Speed Limit sign sizes - 24"x 24", 36"x 36" and 48"x 48".
• Aluminum regulatory traffic signs do not rust and are guaranteed.
• Signs are made from thick .080 mil aluminum.
• All signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• Add posts, sign base and bolts to your order.
• 3M reflective signs comply with latest MUTCD and state DOT specifications.

BRIDGE CLOSED (R11-2b)

0.00

• BRIDGE CLOSED sign size - 48" x 30".
• Signs are made from thick .080 mil aluminum.
• All signs carry the 3M warranty to last for years outdoors.
• Mounting holes top and bottom for easy installations.
• 3M reflective signs comply with the latest MUTCD and State DOT specs.
• Add posts, sign base and bolts to your order.

ROAD CLOSED (R11-2)

0.00

• ROAD CLOSED sign size - 48" x 30".
• Signs are made from thick .080 mil aluminum.
• All signs carry the 3M warranty to last for years outdoors.
• Mounting holes centered top and bottom for easy installations.
• 3M reflective signs comply with the latest MUTCD and State DOT specs.
• Add posts, sign base and bolts to your order.

Impact Attenuator Sand Barrel 2100lbs. w/Lid

265.00

U.S. Barricades sand barrel is a universal type Impact Attenuator and will accommodates all weight requirements with one size barrel. This will eliminate the need to stock different size barrels and reduces inventory costs and confusion. Fully certified and tested to meet or exceed all NCHRP-350 Level 3 requirements.

• Weights used in current standard array geometries 2100lbs.
• Sand weight verification is easy, just use the right configuration barrel for correct weight.
• Sand leaking is eliminated because each sand container is one piece — no edge seals.
• Optional lifting and dumping ring available for easy lifting and emptying.
• Blow-molded manufacturing yields a stronger sand barrel.
• UV stabilizers maximize product life. Color-stable pigments resist fading.
• Shipping, storing, and installation is easy because there are no cone inserts.
• Made in the United States

Impact Attenuator Sand Barrel 2100lbs w/Lid. $265.00 each.

Impact Attenuator Sand Barrel 1400lbs. w/Lid

265.00

U.S. Barricades sand barrel is a universal type Impact Attenuator and will accommodate all weight requirements with one size barrel. This will eliminate the need to stock different size barrels and reduces inventory costs and confusion. Fully certified and tested to meet or exceed all NCHRP-350 Level 3 requirements.

• Weights used in current standard array geometries 1400lbs.
• Sand weight verification is easy, just use the right configuration barrel for correct weight.
• Sand leaking is eliminated because each sand container is one piece — no edge seals.
• Optional lifting and dumping ring available for easy lifting and emptying.
• Blow-molded manufacturing yields a stronger sand barrel.
• UV stabilizers maximize product life. Color-stable pigments resist fading.
• Shipping, storing, and installation is easy because there are no cone inserts.
• Made in the United States

Impact Attenuator Sand Barrel 1400lbs w/Lid. $265.00 each.

Impact Attenuator Sand Barrel 200/400/700lbs. w/Lid

305.00

U.S. Barricades Impact Attenuator is a universal type sand barrel and will accommodate all weight requirements with one size barrel. This will eliminate the need to stock different size barrels and reduces inventory costs and confusion. Fully certified and tested to meet or exceed all NCHRP-350 Level 3 requirements.

• Universal sand barrel accommodates all weight requirements.
• Sand weight verification is easy, just use the right configuration insert for correct weight.
• Sand leaking is eliminated because each sand container is one piece — no edge seals.
• Optional lifting and dumping ring available for easy lifting and emptying.
• Blow-molded manufacturing yields a stronger sand barrel.
• UV stabilizers maximize product life. Color-stable pigments resist fading.
• Made in the United States

Impact Attenuator Sand Barrel 200/400/700lbs. $305.00 Each.

Highway Median Barrier 20' (Concrete)

0.00

Temporary concrete highway median barriers, or Jersey barriers, are ideal for redirecting the flow of traffic during construction of highways, parking lots, or where ever traffic needs to be blocked. Concrete median barriers without lifting holes or lifting slots are also available upon request. We also offer custom permanent barrier and steel plates for joining sections.

US Barricades temporary median barriers are made from NPCA-Certified plants. We specialize in all sizes and stocked with 10ft. and 20ft. sections. For more information and ordering please call (203) 662-0833.

20' Long x 2' Wide (at base) x 2'-8" High
Weight Approx. 8000 lbs.

Highway Median Barrier 10' (Concrete)

0.00

Temporary concrete highway median barriers, or Jersey barriers, are ideal for redirecting the flow of traffic during construction of highways, parking lots, or where ever traffic needs to be blocked. Concrete median barriers without lifting holes or lifting slots are also available upon request. We also offer custom permanent barrier and steel plates for joining sections.

US Barricades temporary median barriers are made from NPCA-Certified plants. We specialize in all sizes and stocked with 10ft. and 20ft. sections. For more information and ordering please call (203) 662-0833.

10' Long x 2' Wide (at base) x 2'-8" High
Weight Approx. 4000 lbs.

Highway Median Barrier 5' (Concrete)

0.00

Temporary concrete highway median barriers, or Jersey barriers, are ideal for redirecting the flow of traffic during construction of highways, parking lots, or where ever traffic needs to be blocked. Concrete median barriers without lifting holes or lifting slots are also available upon request. We also offer custom permanent barrier and steel plates for joining sections.

US Barricades temporary median barriers are made from NPCA-Certified plants. We specialize in all sizes and stocked with 10ft. and 20ft. sections. For more information and ordering please call (203) 662-0833.

5' Long x 2' Wide (at base) x 2'-8" High
Weight Approx. 2000 lbs.

Roll-up Sign with Changeable Legends (Reflective)

0.00

US Barricades Reflective Roll-Up signs feature Velcro™ attached overlays,making legend changes fast and easy. Overlay patches, ordered separately, fasten over the changeable portion(s) of the sign, highlighted with a dashed line. 3M™ Reflective Fluorescent material is standard: call for other material. All US Barricades overlay sign meets or exceeds all MUTCD specifications for road and highway use. Approved for NCHRP-350 Crash Test Standard.

Available Legends:
BE PREPARED TO STOP, Custom Message (Call), DETOUR AHEAD, Flagger (Flag Symbol), Flagger (Paddle Symbol), FLAGGER AHEAD, FRESH OIL, LOOSE GRAVEL, MEN WORKING, MERGE LEFT, MERGE RIGHT, MOWING AHEAD, ONE LANE ROAD AHEAD, PREPARE TO STOP, RIGHT LANE CLOSED AHEAD, ROAD CLOSED, ROAD CLOSED AHEAD, ROAD WORK AHEAD, SHOULDER WORK, SHOULDER WORK AHEAD, SIGNAL WORK AHEAD, STOP, SURVEY CREW, UTILITY WORK AHEAD, WORK AREA AHEAD, Worker (Symbol) and WORKERS AHEAD.

Roll-up Sign with Changeable Legends (Non-reflective)

0.00

Our signs have silk-screened legends and borders on tightly woven polyester mesh fabric. Standard vinyl-coated nylon pockets slip over cross bracing. Velcro™-attached overlays allow you to modify sign legends so you don't need to purchase multiple signs. Overlay patches ordered separately, Lexan pockets are available at extra cost. Stands and cross bracing are sold separately. US Barricades overlay sign meets or exceeds all MUTCD specifications for road and highway use. Approved for NCHRP-350 Crash Test Standard.

Available Legends: BE PREPARED TO STOP, Custom Message (Call), DETOUR AHEAD, Flagger (Flag Symbol), Flagger (Paddle Symbol), FLAGGER AHEAD, FRESH OIL, LOOSE GRAVEL, MEN WORKING, MERGE LEFT,MERGE RIGHT, MOWING AHEAD, ONE LANE ROAD AHEAD, PREPARE TO STOP, RIGHT LANE CLOSED AHEAD, ROAD CLOSED, ROAD CLOSED AHEAD, ROAD WORK AHEAD, SHOULDER WORK, SHOULDER WORK AHEAD, SIGNAL WORK AHEAD, STOP, SURVEY CREW, UTILITY WORK AHEAD, WORK AREA AHEAD, Worker (Symbol) and WORKERS AHEAD. Available Overlays: 500 FT, 1000 FT, CENTER AND LEFT.

Barrier Delineator Marker

0.00

US Barricade concrete barrier markers are the most effective and convenient products on the market that both provide bright delineation of concrete barriers and bridge parapets. Many products exist that claim to be easy to use and provide durable delineation, but only US Barricades deliver. Our barrier markers are durable enough for use in both work zone construction and permanent installations. All US Barricade concrete barrier markers are made in the United States.

Durability & Quality
US Barricade concrete barrier markers are manufactured with industrial engineering resins and the best reflective tapes and adhesives. They are built tough to endure the rigors of construction work zones.

Quality is essential to the durability of our products. A highly trained staff of quality assurance employees is continuously monitoring the manufacturing process as well as issuing the final approval of the product after manufacturing has been completed. What this means to you, as the consumer, is that when you buy a US Barricade product, you are assured of the best durability and the highest quality in materials and workmanship.

Colors & Adhesives
US Barricade barrier markers are manufactured in six different sizes and one standard color – white – in three reflective grades – 3M Engineer Grade, High Intensity (HIP) and Diamond Grade – and can be made reflective on one or both sides. All US Barricade concrete barrier markers offer an optional factory-applied high tack butyl adhesive pad, that provides for "peel-and-stick" quick installation to the barrier wall.

Call (203) 662-0833 for the lowest quote in the United States

Guardrail Delineator Markers

0.00

US Barricades Guardrail markers are the most effective and convenient products on the market that both provide bright delineation of steel w-beam guardrails. Many products exist that claim to be easy to use and provide durable delineation, but only US Barricades Guardrail markers deliver. US Barricades Guardrail markers are durable enough for use in both work zone construction and permanent installations. All US Barricade Guardrail Delineator markers are made in the United States.

Durability & Quality
US Barricade Guardrail markers are manufactured with virgin engineering resins and the best reflective tapes. They are built tough to endure the rigors of construction work zones.

Colors & Adhesives
US Barricade Guardrail markers are manufactured in four different styles and one standard color white. Reflective sheeting grades are Engineer Grade, High Intensity (HIP) and Diamond Grade, and can be made reflective on one or both sides. Some guardrail markers offer an optional factory-applied high tack butyl adhesive pad, that provides for "peel-and-stick" quick installation to the guardrail. Easy to apply quick-set adhesives are available for other glue on applications.

Guardrail Delineator Specifications

Butterfly
Mount Bolt-On style reflectors behind post bolts with the reflector's prongs pointed towards oncoming traffic. Tighten bolts securely over two prongs of the reflector deep into slot provided. Mount Glue-On style reflectors in "V" channel with Dapco adhesive #795A.

IBM
Apply Dapco adhesive #795A inside the channel of the IBM marker and press into place on the top of the steel I-Beam post.

Straight
Straights may be mounted directly to wooden guardrail support posts using two (2) 16 DG nails with (2) 3/16" (0.5 cm) washers in the factory drilled holes provided. If ordered with sheeting on one side only, make sure that sheeted side faces traffic.

FG427 and FG527
The FG427 and 527 may be mounted directly to wooden guardrail support posts using two (2) 16 DG nails with two (2) 3/16" (0.5 cm) washers in the factory drilled holes provided. Install with sheeted side facing traffic. Made in the USA

Call (203) 662-0833 for the lowest quote in the United States

Delineator Post "white"

0.00

US Barricades Delineator guide posts markers are the most durable and effective products on the market that both provide bright delineation of roadway edge-lines and medians. Many brands claim to provide durable delineation but the US Barricades guide posts really deliver. The USB 400 & USB 500 guide posts markers are durable enough for years of use in extreme cold or hot desert sun. All US Barricades delineator products are approved by the US/DOT FHWA for use on all federal highway projects. All US Barricades Delineator guide posts markers are made in the United States.

Durability & Quality

USB 400 & USB 500 guide posts are manufactured with post-consumer recycled engineering thermoplastic resins and the highest quality of retro-reflective tapes. They are built tough to endure multiple high-speed impacts and the rigors of years of installed service.

Quality is essential to the durability of our products. A highly trained staff of Quality Assurance employees is continuously monitoring the manufacturing process as well as issuing the final approval of the product after manufacturing has been completed. What this means to you, as the consumer, is that when you buy a US Barricade product, you are assured of the best durability and the highest quality in materials and workmanship.

Colors, Reflectors & Installation Tools

USB 400 & USB 500 guide posts markers are manufactured in two styles, five standard colors – white, yellow, and gray – with additional colors available for utility marking applications. We offer four grades of reflective sheeting – Engineer, High Intensity (HIP), Reflexite and Diamond Grades – and each post can be made reflective on one or both sides. Informational decals are available by special order. Both posts offer an optional plastic or steel anchor, that provides for excellent retention. Both manual and power tools are available for quick and easy installation.

Construction: All delineator posts are manufactured in the U.S.A. The posts shall be made with a minimum of 5% post-consumer, engineered recycled thermoplastic, with the total recycled content being greater than 50%. Post will be modified with virgin modifiers, pigments and UV stabilizers for outdoor weather-ability. Posts shall be one color plastic throughout and have a solid plastic profile without fillers.

Length: Post shall be at specified length plus or minus .250" (6.35 mm).

Reflective Sheeting: Shall be of a specified grade and size affixed to the post by the manufacturer.

FG 95 Anchor: The plastic anchor shall meet the same physical properties as delineator posts, shall be 2.0" (50.8 mm) in length, and of sufficient strength so as to resist pull out in multiple high speed impacts. Anchors shall be placed in slots at the bottom tip of posts prior to installation.

FG 96 Steel Anchor: The steel anchor unit shall be a hot rolled rail steel or new billet steel meeting the physical requirements of ASTM A499 and the chemical requirements of ASTM A1.

Recyclable/Returnable: Flexible posts will be recyclable by the manufacturer. Posts that become damaged under normal use will be returned to the manufacturer, reground then reused to make other delineation products. The manufacturer will offer credit toward the next purchase when products are returned.

Call (203) 662-0833 for the lowest quote in the United States

Delineator Post

0.00

Durability & Quality

Colors, Reflectors & Installation Tools

Length: Post shall be at specified length plus or minus .250" (6.35 mm).

Reflective Sheeting: Shall be of a specified grade and size affixed to the post by the manufacturer.

FG 96 Steel Anchor: The steel anchor unit shall be a hot rolled rail steel or new billet steel meeting the physical requirements of ASTM A499 and the chemical requirements of ASTM A1.

Call (203) 662-0833 for the lowest quote in the United States

Channelizer Post (2 inch round)

0.00

U.S. Barricade Model 200 Channelizer Post
Round surface mount Channelizer posts, made in the United States.

The U.S. Barricade 200 Series post is a 2-1/4" inch round channelizer made of polyurethane, is the toughest flexible plastic post in the world and made in the United States.

The USB 200 posts are highly visible, day and night. They clearly delineate driving lanes with bright colors and reflective sheeting. To reduce the risk of accidents, place durable polyurethane channelizer posts at critical points along your roadways where safety hazards exist. The USB 200 remains extremely flexible, even at extreme temperatures and returns to an upright position after impact. It has been NTPEP tested and meets MUTCD requirements for channelizing devices, and meets the requirements of NCHRP 350 for Category 1 Devices.

Key features & benefits of the USB 200 Urethane Channelizer Post:

• 2-1/4" Round Channelizer Post
• Made of Highly Durable Thermoplastic Polyurethane for High Impact Resistance
• 360° of Reflective Visibility
• Stands Up to Extreme Temperatures
• No Metal Parts to Rust or Seize
• Ultraviolet Resistant
• 1-Piece Post Construction
• Simple Installation
• NTPEP Tested
• MUTCD Compliant

Applications:

• Traffic Islands
• Dangerous Curves
• Work Zones
• Parking Lots
• Airports
• Highway Railroad Intersections
• Traffic Circles

Damaged Posts Are Replaced Quickly & Easily
DP 200 posts are attached to our bases with two simple Quick Release pins. It takes only seconds to replace a damaged post using the Pin Removal Tool. This is very important for work zone installations where speed and ease of replacement are of the utmost importance. Quick replacement of damaged posts means less exposure for workers, a big plus for safety!

Channelizer Post (3 inch round)

0.00

U.S. Barricade Model 300 Channelizer Post
The only channelizer post made in the United States!

U.S Barricades channelizer posts come in many sizes with reflective options to meet all types of traffic control needs. Our posts are the most durable and the brightest in the industry, using 3M reflective sheeting makes our channelizer post highly visible. Research has shown that fluorescent colors grab the eye's attention quickly keeping drivers alert. In low light conditions or on dark, gray winter days when visibility is limited, our fluorescent posts stand out boldly and help to more effectively guide motorists.

Channelizer Options:

Sizes - 18", 24", 33", 36", 39" and 42"
Post Color - Orange, White and Yellow.
3M Reflective Bands - 1-3", 2-3" and 3-3" bands.
Band Colors - White and Yellow.

Base Options:

A.B.S. high impact plastic, one piece injection molded with two (2) plastic anchor drive pins.
Hy-Last, heavy duty elastic rubber, one piece molded base.

Poly-Urethane – the Material of Choice:

The USB 300 Channelizer post are made from poly-urethane, the toughest flexible polymer on the market today. Poly-urethane provides high tensile and elongation properties, with superior resistance to tearing and puncture. The polymer maintains its flexibility to -50° F, and its toughness during exposure to fuels, oils and grease. Polyurethane is simply the material of choice for “can’t fail” applications.

Damaged Posts Are Replaced Quickly & Easily:

All channelizer posts are attached to our bases with two simple Quick Release pins. It takes only seconds to replace a damaged post without using any tools, this is very important for work zone installations where speed and ease of replacement are of the utmost importance. Quick replacement of damaged posts means less exposure for workers, a big plus for safety!

Typical applications for channelizer posts:

· 2-way 2-lane Detour Operations
· Acceleration Lanes & Merges
· HOV Lane Buffer Separation
· Dedicated Transit Lanes
· Parking Lots & Garages
· Motorist aid call boxes
· Rental Car Facilities
· Drive-through Lanes
· Median crossovers
· Airport Crosswalks
· School Crosswalks
· Traffic Island ends
· Dangerous curves
· Objects / hazards
· Culvert locations

Speed Bump 2 End-Cap MALE

39.50

Speed Bump 2.5 End-Cap MALE, this is for the U.S. Barricade Speed Bump 2.

$39.50 each, to order by phone please call 203-662-0833.

Speed Bump 2 End-Cap FEMALE

39.50

Speed Bump 2 End-Cap FEMALE, this is for the U.S. Barricade Speed bump 2.

$39.50 each, to order by phone please call 203-662-0833.

Speed Bump 2.5 End-Cap MALE

39.50

Speed Bump 2.5 End-Cap MALE, this is for the U.S. Barricade Speed Bump 2.5.

$39.50 each, to order by phone please call 203-662-0833.

Speed Bump 2.5 End-Cap FEMALE

39.50

Speed Bump 2.5 End-Cap FEMALE, this is for the U.S. Barricade Speed Bump 2.5.

$39.50 each, to order by phone please call 203-662-0833.

Speed Bump 2.5 (Vulcanized Recycled Rubber)

172.50

The U.S. Barricade 2.5 inch Mini Speed Bump is the only free-standing speed bump available on the market today for traffic speeds below 10 MPH without the need to bolt down these units down. You can deploy and recover these traffic calming products whenever and wherever you need them. The unique design of these speed bumps means that they will stay in place without the use of stakes, bolts or adhesives. Simply put them down and link them together, also the USB 2.5 is also ideal for permanent applications. Made in the United States of America.

The USB 2.5 Mini Speed Bump provides you with 2.5 inches of solid, 100% recycled rubber which is manufactured to withstand extreme temperatures, constant U.V. light, extreme weather conditions, and of course, high traffic volume. The USB 2.5 has been repeatedly field-tested to take the abuse and compression of extremely high-weight vehicles, including fully-loaded, 74,000 lb tractor-trailers. These qualities make the USB 2.5 Speed Bump ideal for temporary traffic stops, guarded gate entrances or exits, construction sites, or anywhere a more aggressive traffic control device is temporarily needed.

The USB 2.5 Speed Bump comes with embedded, high-visibility AASHTO reflectors for use during low-light or night-time conditions. (White reflectors are available.)

Features:
* Portable OR Permanent
* Unlimited Connectivity
* Extremely Durable, High-Quality Recycled Rubber
* Does Not Cause Damage to Vehicle Undercarriages
* Manageable Size and Weight
* Cost Effective
* Recyclable
* THREE (3) YEAR LIMITED WARRANTY
* Made in the U.S.A.

Dimensions & Technical Specs:
# HEIGHT: 2.5" (inches)
# LENGTH: 36" (inches) (measurement perpendicular to oncoming traffic)
# WIDTH: 18" (inches) (measurement which oncoming traffic drives over)
# WEIGHT: 38lbs. (pounds)
# MATERIAL: Vulcanized Recycled Rubber
# REFLECTIVITY: 2 Embedded, Two-Way Reflectors (Yellow or White)
# EMPLACEMENT: Permanent Emplacement OPTIONAL

Our Price: $172.50 each, Lowest price in the industry! Call 203-883-8660 to place orders.

Speed Bump 2 Mini (Recycled Rubber)

172.50

The U.S. Barricade 2 inch Mini Speed Bump is a free standing or permanent rubber speed hump for maintaining traffic speeds from 15 to 25 MPH. These units use fewer fastening bolts, allowing quick removal when necessary for snow plows or street re-surfacing. Made from premium quality rubber. Permanent installation requires hardware kit (sold separately). Made in the U.S.A.

The USB Mini Speed Bump provides you with 2 inches of solid, 100% recycled rubber which is manufactured to withstand extreme temperatures, constant U.V. light, extreme weather conditions, and of course, high traffic volume. The USB 2 has been repeatedly field-tested to take the abuse and compression of extremely high-weight vehicles, including fully-loaded, 74,000 lb tractor-trailers. These qualities make the USB 2 Speed Bump ideal for temporary traffic stops, guarded gate entrances or exits, construction sites, or anywhere a more aggressive traffic control device is temporarily needed.

The USB 2 Mini Speed Bump comes with embedded, high-visibility AASHTO reflectors for use during low-light or night-time conditions. (White reflectors are available.)

Features:
* Portable OR Permanent
* Unlimited Connectivity
* Extremely Durable, High-Quality Recycled Rubber
* Does Not Cause Damage to Vehicle Undercarriages
* Manageable Size and Weight
* Cost Effective
* Recyclable
* Made in the U.S.A.
* THREE (3) YEAR LIMITED WARRANTY

Dimensions & Technical Specs:
# HEIGHT: 1-7/8" (inches)
# LENGTH: 40" (inches) (measurement perpendicular to oncoming traffic)
# WIDTH: 18" (inches) (measurement which oncoming traffic drives over)
# WEIGHT: 39lbs. (pounds)
# MATERIAL: Vulcanized Recycled Rubber
# REFLECTIVITY: 2 Embedded, Two-Way Reflectors (Yellow or White)
# EMPLACEMENT: Permanent Emplacement OPTIONAL

Our Price: $172.50 each, Lowest price in the industry! Call 203-662-0833 to place orders

Speed Bump 4 (Recycled Rubber)

179.50

The U.S. Barricade 4 inch Speed Bump is the only free-standing speed bump available on the market today for traffic speeds of 3 - 5 MPH without the need to bolt down these units down. You can deploy and recover these traffic calming products whenever and wherever you need them. The unique design of these speed bumps means that they will stay in place without the use of stakes, bolts, or adhesives. Simply put them down and link them together, made in the U.S.A.

The USB 4 Speed Bump provides you with 4 inches of solid, 100% recycled rubber which is manufactured to withstand extreme temperatures, constant U.V. light, extreme weather conditions, and of course, high traffic volume. The USB 4 has been repeatedly field-tested to take the abuse and compression of extremely high-weight vehicles, including fully-loaded, 74,000 lb tractor-trailers. These qualities make the USB 4 Speed Bump ideal for temporary traffic stops, guarded gate entrances or exits, construction sites, or anywhere a more aggressive traffic control device is temporarily needed.

The USB 4 Speed Bump comes with a high-visibility, yellow reflective stripe for use during low-light or night-time conditions.

Features:
* Portable OR Permanent
* Unlimited Connectivity
* Extremely Durable, High-Quality Recycled Rubber
* Does Not Cause Damage to Vehicle Undercarriages
* Manageable Size and Weight
* Cost Effective
* Recyclable
* FIVE (5) YEAR LIMITED WARRANTY

Dimensions & Technical Specs:
# HEIGHT: 4" (inches)
# LENGTH: 40" (inches) (measurement perpendicular to oncoming traffic)
# WIDTH: 18" (inches) (measurement which oncoming traffic drives over)
# WEIGHT: 50lbs. (pounds)
# MATERIAL: Vulcanized Recycled Rubber
# REFLECTIVITY: Yellow Reflective Stripe (both sides)
# EMPLACEMENT: Temporary Only

Our Price: $179.50 each, Lowest price in the industry! Call 203-662-0833 to place orders.

STATE LAW STOP FOR PEDESTRIAN (R1-6a) HIP w/base

0.00

Improve Pedestrian Safety
Every day pedestrians are at risk when crossing the street. There are approximately 5,000 pedestrian deaths per year in the United States. This is an alarming problem that needs to be addressed with durable, low cost safety solutions.

There is a need for traffic safety products designed to quickly grab a motorist s attention and alert them of pedestrians in the crosswalk. The Green Cross Safety System is able to quickly get a drivers attention by utilizing fluorescent yellow green on the In-Street Pedestrian Signs. Our vertical panels and bases are easy to use and there is something available for every budget.

The U.S. Barricade Green Cross product line
We offer many options for your crosswalk safety program suited to meet your budget.

o Durable yet extremely lightweight safety posts to highlight crosswalk areas
o Bases to secure safety posts in the roadway
o Highly reflective flags, signs and stop paddles
o Complete crosswalk safety kits

In-street pedestrian crossing signs are most effective when used during peak pedestrian use. For example, if being used in a school cross walk, the most effective times for the system to be in the roadway would be during school commute times. The Green Cross system is most effective on unsignalized low-speed two-lane streets. The mobility of the Green Cross system allows it to be taken in and out of the street during the school day enhancing the effectiveness of the system.

Green Cross Bases:
Within the Green Cross system there are several mounting options for different conditions. All bases are designed to withstand the rigors of the field including vehicle impacts and extreme weather conditions. Our 10#, 35# "Banana" and 40# "Yeti" bases are environmental friendly, constructed of recycled rubber tire and polymer binders.

FG 300 Base:
The 300 base is for fixed installations where the post and base will remain on the road surface for an extended period of time. Bases are constructed of a UV-stable high-impact plastic. Safety posts are mounted to the base with two nylon locking pins. Posts are secured to the roadway with either epoxy or bolts.

FG 300 10# Round Portable Base:
The 10# rubber base is for use in situations where the base and post are moved on and off the road surface repeatedly. This base is lighter weight and can be moved easily.

FG 300 35# "Banana" Portable Base:
A rubber base for demanding applications; it has the weight to support the larger crosswalk signs. For an added convenience the 35# base features a recessed handle, which makes picking up and moving it a snap. Bases also nest together for easy storage during transport.

"Yeti" 40# Portable Base:
The Yeti is a heavy duty portable base for your most challenging crosswalk locations. It will stand up to high winds and the larger crosswalk signs. The Yeti bases snap together for simplified storage and the molded in handles make transport a snap.

Green Cross Signs:
12"x 36" Yield to Pedestrian or Stop for Pedestrian Signs (Flexible and Rigid)
12" x 44" Yield to Pedestrian or Stop for Pedestrian Sign - Rigid
In-Street Pedestrian Crossing signs are used to remind drivers of laws regarding right of way. These signs can be mounted on our Model FG 342 EFX posts or X-Tube Upright and placed in the street utilizing either our fixed, 20# hex or 35# "Banana" or 40# "Yeti" base.

Both signs meet the standards of the 2003 MUTCD Yield to Pedestrian (R1-6) or the Stop for Pedestrian (R1-6A). These signs may be used at un-signalized school crossings; if an island is available they should be placed on the island.

Our Flexible Signs are constructed of flexible prismatic vinyl with stays at the top and bottom for support. Our Rigid Signs are constructed of durable UHMW plastic and utilize cube corner prismatic sheeting.

Green Cross Posts:
EFX FYG Safety Post
This is our toughest post; designed to support larger signs. This post was created to stand up to your most challenging locations and provide the greatest return on investment. The EFX posts are offered in lengths of 42" and 48" and in the following colors: fluorescent yellow green, yellow, orange, red, blue, green, brown and black.

52" X-Tube Post
The X-Tube is a square reinforced plastic, lightweight post that is used with our Yeti base and very durable. (Available in white only)

SFP Rigid Sign on
35lb rubber base

YTP Rigid Sign on
quick connect base

STATE LAW YIELD FOR PEDESTRIAN (R1-6) HIP w/Ground Mount Base

235.00

STATE LAW YIELD FOR PEDESTRIAN (R1-6) High Intensity Sheeting (HIP) with ground mount base are designed for in-street use at non signalized crosswalks. Signs have an overall height of 47" with a panel size of 12"x36". Back-to-back panels are sheeted with 3M™ High Intensity sheeting and is MUTCD, state DOT and NCHRP 350 approved.

All signs are equipped with an anti-twist feature to keep the panels properly aligned. Post are flexible polyethylene plastic, resistant to UV, ozone and hydrocarbons. Select the base type, or order replacement sign assemblies 'without base'. Signs come in poly-carb Lexan or aluminum, available bases units are below.

300 Black Ground Base:
The 300 black ground mount base is for fixed installations where the post and base will remain on the road surface for an extended period of time. Bases are constructed of a UV-stable high-impact plastic. Safety posts are mounted to the base with two nylon quick release locking pins. Ground mount base units are secured to the roadway with either epoxy or bolts.

300 Color Ground Base:
The 300 color ground mount base is for fixed installations where the post and base will remain on the road surface for an extended period of time. Our colored bases match our colored posts, providing an extra measure of conspicuity. Standard colors are White, Yellow, Fluorescent Yellow Green, Fluorescent Orange, Blue, Brown, Green and Red are available by special order. Bases are constructed of a UV-stable high-impact plastic. Safety posts are mounted to the base with two nylon quick release locking pins. Ground mount base units are secured to the roadway with either epoxy or bolts.

300 Invisi-Base:
Invisi-Base – for installations flush with the pavement is the best method for northern states.

300 Color Base Invisi-Base 300 Black Base

$235.00